• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1837-1845
• /
• 2015

The longitudinal velocity is necessary for accurate vehicular positioning in urban environment. The pitch angle, which is a road slope, should be calculated to acquire the longitudinal velocity. However, it is impossible to consider very accurate pitch, when using a sensor and an algorithm. That's why process noise and positioning stimation error of IMU should be adjusted to the driving environment and fuse GPS, OBD data with ACF which consist of AKF, CF in this paper. Then, final pitch angle which is appropriate for driving environment is estimated by IMMKF in order to optimize the system model according to road slope models.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.129-136
• /
• 2018

In this paper, we propose a new real-time lane detection method that is efficient for road environment. Existing methods have a problem of low reliability under environmental changes. In order to overcome this problem, we emphasize the lane candidate area by using gray level division. And Extracts a straight line component near the lane by using the Hough transform, and generates an ROI for each straight line based on the extracted coordinates. And integrates the generated ROI images. Then, the lane is determined by dividing the object using the dual queue in the ROI image. The proposed method is able to detect lanes even in the environmental change unlike the conventional method. And It is possible to obtain an advantage that the area corresponding to the background such as sky, mountain, etc. is efficiently removed and high reliability is obtained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.269-279
• /
• 2020

Traffic estimation mainly involves surveying equipment such as automatic vehicle classification, vehicle detection system, toll collection system, and personnel surveys through CCTV (Closed Circuit TeleVision), but this requires a lot of manpower and cost. In this study, we proposed a method of estimating traffic volume using deep learning and stereo CCTV to overcome the limitation of not detecting the entire vehicle in case of single CCTV. COCO (Common Objects in Context) dataset was used to train deep learning models to detect vehicles, and each vehicle was detected in left and right CCTV images in real time. Then, the vehicle that could not be detected from each image was additionally detected by using affine transformation to improve the accuracy of traffic volume. Experiments were conducted separately for the normal road environment and the case of weather conditions with fog. In the normal road environment, vehicle detection improved by 6.75% and 5.92% in left and right images, respectively, than in a single CCTV image. In addition, in the foggy road environment, vehicle detection was improved by 10.79% and 12.88% in the left and right images, respectively.

• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.73-80
• /
• 2016

Street is the most fundamental component of city and place to promote diverse actions of people. Pedestrians gaze at various street environments. A visual gaze means that there are interesting elements and these elements need to be preferentially improved in the street environment improvement project. Therefore, this study aims to set up the priorities of street environment components by analyzing eye movements from a pedestrian perspective. In this study, street environment components were classified into road, street facility, building(facade) and sky and as street environment images, three "Streets of Youth" situated in Gwangbok-ro, Seomyeon and Busan University of Busan were selected. The experiment targeted 30 males and females in their twenties to forties. After setting the angle of sight through a calibration test, an eye-tracking experiment regarding the three images was conducted. Lastly, the subjects were asked to fill in questionnaires. The following three conclusions were obtained from the results of the eye-tracking experiment and the survey. First, building was the top priority of street environment components and it was followed by street facility, road and sky. Second, as components to be regarded as important, fast 'Sequence', many 'Fixation Counts' and 'Visit Counts', short 'Time to First Fixation' and long 'Fixation Duration' and 'Visit Duration' were preferred. Third, after voluntary eye movements, the subjects recognized the objects with the highest gaze frequency and the lowest gaze frequency.

• Journal of recreation and landscape
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2018

This study is about the investigation of the walking environment of the First Experimental Elementary School in Shapingba District of Chongqing City and the Zaozilanya Elementary School in Yuzhong District and the analysis of the pedestrian's consciousness. The improvement plan is obtained by comparing and analyzing the walking environment around the school. The survey results are as follows. According to the survey results of the walking environment around the school, the sidewalks of the two schools are relatively narrow, and there are more pedestrians crossing the road. There is a phenomenon of parking in both schools. The phenomenon of parking in Zaozilanya Elementary School is even more serious. In investigating the most important elements of the school's pedestrian environment, the setting of the signpost, the setting of the crosswalk and signal lights, the setting of the fence, the setting of the vehicle's deceleration facilities, and the control of the school gate are all necessary. Therefore, in order to create a safe and comfortable improvement plan for the surrounding environment of the school, first of all, in the improvement of the facilities around the school, the setting of the fence, the setting of the speed bump, the improvement of the crosswalk and the signal light. Second, in terms of restrictions, the scope of protection around the school needs to be expanded, and restrictions on parking and restrictions on vehicle traffic need to be implemented. Third, in terms of education and publicity, it is not only necessary to provide safety guidance for students to go to school, but also to provide drivers with driving safety education and publicity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.545-552
• /
• 2017

Ground subsidence can result in the formation of sinkholes, potholes, settlement of structures, and road subsidence. Road subsidence is described as the sudden collapse of the road surface into subsurface cavities caused by the loss of bearing capacity in the ground, such as the dissolution of limestone by fluid flow in the surface causing the formation of voids leading to subsidence at the surface. Road subsidence occurs about 665 times annually, and this incidence has been increasing until 2013. Damaged underground facilities, management negligence, and lowering of the ground water table have been the causes of road subsidence in Seoul. Seoul metropolitan government announced special management counter plans to relieve the anxieties and make the roads safe for passing. Construction sites, such as excavation works, need to be managed properly because they have strong potential to induce road subsidence. The aim of this study was to identify the main causes of road subsidence and suggest management plans. First, life cycle cost analysis revealed the daytime construction to be more appropriate than nighttime. In addition, by analyzing the limitations of using sand as a backfill material, it is proposed to use a flowable backfill material instead of sand. Finally, to reduce the blind spots, which is a problem in surveying the road pavement conditions of local governments, the road to be managed is divided into several zones, and a specialized agency is selected for each zone and a method of surveying the blind spots through collaboration is suggested.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.6
• /
• pp.269-277
• /
• 2024

With the advancement of modern IT technologies, the operation of autonomous vehicles is becoming a reality, and route planning is essential for this. Generally, route planning involves proposing the shortest path to minimize travel distance and the quickest path to minimize travel time. However, the quality of these routes depends on the topological characteristics of the road network graph. If the connectivity structure of the road network is not rational, there are limits to the performance improvement that routing algorithms can achieve. Real drivers consider psychological factors such as the number of turns, surrounding environment, traffic congestion, and road quality when choosing routes, and they particularly prefer routes with fewer turns. This paper introduces a simple path algorithm that seeks routes with the fewest turns, in addition to the traditional shortest distance and quickest time routes, to evaluate the characteristics of road networks. Using this simple path algorithm, we compare and evaluate the connectivity characteristics of road networks in 20 major cities worldwide. By analyzing these road network characteristics, we can identify the strengths and weaknesses of urban road networks and develop more efficient and safer route planning algorithms. This paper comprehensively examines the quality of road networks and the efficiency of route planning by analyzing and comparing the road network characteristics of each city using the proposed simple path algorithm.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.60-69
• /
• 2022

Recently, the importance of simulation validation in a virtual environment for autonomous driving system validation is increasing. At the same time, interest in the advancement of the virtual driving environment is also increasing. To develop autonomous driving technology, a simulation environment similar to the real-world environment is needed. For this reason, not only the road model is configured in the virtual driving environment, but also the driving environment configuration that includes the surrounding environments -traffic, object, etc- is necessary. In this article, FMTC, which is a test bed for autonomous vehicles, is implemented in a virtual environment and advanced to form a virtual driving environment similar to that of real FMTC. In addition, the similarity of the virtual driving environment is verified through comparative analysis with the real FMTC.

• The Journal of Society for e-Business Studies
• /
• v.6 no.1
• /
• pp.101-121
• /
• 2001

MOCT(Ministry of Construction St Transportation) suggested "A Plan for Implementation of Knowledge-based Economy for the Construction Industry" to add high value to a construction industry. by means of knowledge-based management. However, there is no knowledge management system which considers characteristics of a domestic construction industry. So a useful knowledge vanished the moment a company terminated a construction Uoject. Therefore, it is necessary to develop "An application method of a knowledge management system for the construction industry" which takes a real environment into consideration. This study aims to present the road map of a knowledge management system which helps the bodies of the construction industry(government, research center/university, enterprise, etc) to do a knowledge activity efficiently. To accomplish this objective, we analyzed overall knowledge management activities. In addition we suggested an implementation direction and strategy of a knowledge management system for the construction industry. As results of this study, we presented the road map of a knowledge management system for the construction industry, which is composed of policy forum, study forum, professional forum, research forum and knowledge 8t information DB. We expect that results of this study will be used as a basis for implementing the knowledge portal that brings a construction industry to a high value added industry.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.4
• /
• pp.23-30
• /
• 2011

We propose an intelligent ribbon road network for automatic vehicle simulation, and a real-time algorithm for large-scale, realistic traffic simulation based on artificial energy functions. Our method reconstructs a road network automatically from both GIS (Geographic Information System) real-world data and synthetic models. Such automatic road network helps us to easily simulate almost every possible scenario such as intersections, ramps, etc. In order to simulate agents' movement, we design car-environment interaction energy and car-car interaction energy functions. Car agents move along the road network according to the proposed energy functions while avoiding collisions with other car agents.