• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.52-59
• /
• 2008

Most accident reconstruction or analysis depend on the coefficient of friction to estimate the vehicle speeds. Skid mark and coefficient of friction are usually utilized to calculate the velocity and behavior of vehicles. For a critical case such as traffic accident reconstruction, however, the initial velocity of the car should be calculated precisely. In this paper, emergency brake tests on ABS and Non-ABS brake system are conducted on the dry pavement asphalt road on speed 40, 60, 80 and 100 km/h respectively. The SWIFT sensor was established in the front wheel and rear wheel at driver side to measure the forces, moments and speeds of revolution of the tires. These tests results can be available to brake tests and accident reconstruction.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.137-146
• /
• 2018

PURPOSES : This study aims to analyze how the installation of advanced warning devices affects individual drivers' driving behaviors with operating record data collected from 100 vehicles. METHODS : With collected data, the changes in individual drivers' driving behaviors, such as Forward Collision Warning (FCW) and Lane Departure Warning (LDW), were investigated with respect to the cumulative distance traveled and driving time. For the analysis, operating record data collected from 100 vehicles for seven months were used. RESULTS : The results showed that individual drivers' driving behaviors could be categorized into six different types. In addition, most of the drivers showed unstable warning patterns in the initial stage after installation of an advanced warning device. Approximately 40% of vehicles equipped with advanced warning systems were found to have positive effects, indicating that the frequencies of both FCW and LDW had been continuously decreasing after installation of the system. CONCLUSIONS : The warning device might be helpful for making drivers' driving behaviors safer. Driving behaviors during the initial stage of the system installation, which might be regarded as an adaptation phase, were found to be very unstable compared with normal situations, indicating that adequate education and training should be provided to all the drivers to prevent operator disruption at the initial installation of the system.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.20-24
• /
• 2008

차량에 부착된 CCD 카메라를 이용하여 취득된 도로 주변의 영상에 존재하는 사람의 얼굴을 추출하여 제거하는 처리를 할 경우, 사생활 침해의 문제 없이 사용자들에게 원하는 지역의 도로영상의 제공이 가능해진다. 이 실험의 목적은 차량에서 취득된 도로 주변의 칼라 영상에서 사람의 얼굴을 자동으로 추출하는 기술을 개발하는데에 있다. 도로 주변의 CCD영상에서의 얼굴 추출을 위해, HSI(색상, 채도, 명도) 칼라 모델과 YCrCb 칼라 모델을 사용하여 이들 모델에 임계값을 적용하여 피부색을 검출하였으며, 두 개의 모델을 사용한 결과 효과적인 피부색의 검출이 가능함을 확인할 수 있었다. 검출된 피부색 영역을 연결성과 밝기 차이를 이용하여 클러스터링을 실행하고 이렇게 나뉘어진 각각의 구역들에 구역의 면적, 구역내 존재하는 화소의 개수, 구역의 가로와 세로 비율 그리고 타원조건을 적용하여 얼굴 후보 구역을 결정하였다. 그리고 최종적으로 남겨진 구역을 이진화 하고, 이진화 된 영상 중 검은 부분이 5% 이상일 때 이들을 눈, 코, 입 등으로 간주하여 최종적인 얼굴로 결정하였다. 실험 결과 추출되지 않은 얼굴과 잘못 추출된 구역이 발생했으나, 얼굴에 해당하는 임계값등의 조건을 약화시킬 경우 대부분의 얼굴의 추출이 가능할 것으로 여겨지며, 추출된 구역을 흐리게 처리할 경우 오인식된 부분에 대한 사용자의 거부감도 줄일 수 있을 것 으로 예상된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1166-1173
• /
• 2011

There have been many researches about SUGV (Small Unmanned Ground Vehicle) mechanism regarding off-road mobility and obstacle negotiation. This paper introduces an analysis of geometry parameters to enhance the vertical obstacle negotiation ability for the SUGV. Moreover, this paper proposes an anti-shock structure analysis of wheels to protect the main body of the SUGV when it falls off a vertical obstacle. Major system geometry parameters will be determined under certain constraints. The constraints and optimization problem for maximizing the ability of vertical obstacle negotiation will be presented and discussed. Dynamic simulation results and experiments with manufactured platform will also be presented to validate the analysis. Several types of wheel materials and structures will be compared to determine the best anti-shock wheel design through FEM (Finite Element Method) simulations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.585-590
• /
• 2017

Vehicle behavior is determined by forces and a torques generated at the ground contact surface of the tire. Various tire models are used to calculate the forces and torques acting on the tire. The brush model calculates the forces and torques with fewer coefficients than other tire models. However, owing to fewer degrees of freedom in calculating the forces, this model has limitations in precisely expressing measured data. In this study, this problem was addressed by adding the least parameters to the friction coefficient and tire properties of the brush model, and the proposed model was validated.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.69-76
• /
• 2015

PURPOSES : Performance evaluation of four types of asphalt concrete overlays for deteriorated national highways. METHODS : Pavement distress surveys for crack rate and rut depth have been conducted annually using an automated pavement survey vehicle since 2007. Linear and non-linear performance prediction models of the asphalt concrete overlays were developed for 43 sections. The service life of the asphalt overlays was defined as the number of years after which a crack rate of 30% or rut depth of 15mm is observed. RESULTS : The service life of the asphalt overlays was estimated as 17.4 years on an average. In 90.7% of the sections, the service life of the overlays was 15 years or more which is 1.5 times the life of conventional asphalt concrete overlays used in national highways. The performance of the overlays was dependent on the type of asphalt mixture, traffic volume levels, and environmental conditions. CONCLUSIONS : The usage of stone mastic asphalt (SMA) and polymer-modified asphalt (PMA) for the overlays provided good resistance to cracking and rutting development. It is recommended that appropriate asphalt concrete overlays must be applied depending on the type of existing pavement distress.

• Journal of Sensor Science and Technology
• /
• v.12 no.4
• /
• pp.164-169
• /
• 2003

Recently, as the road capacity reaches the limit and environmental problems becomes serious, there is gradually increased a need for railroad vehicles that are environment-friendly and have time regularity, reliability and safety. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. We developed the hardware and software of the measurement system for on-line test and evaluation of korean high speed train. The software controls the hardware of the mesurement data and acts as interface between users and the system hardware. In this paper, we is studied for electric apparatus performance of railway vehicle using sensor. In order to this test is developed signal conversion system. Using this system, we obtained important result for pantograph voltage, battery voltage, axle speed, and inverter current.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.227-235
• /
• 2017

In this paper, a systematic 5-mode(road steering, all-wheel steering, crab steering, reduced swing out mode and independent steering) steering algorithm design process for an all-terrain mobile crane with 5 axles and all steerable wheels is proposed. Steering angles for each steering mode are designed based not only on basic theory but also on vehicle specification, design limitation and requirements. A multi-body dynamic analysis is carried out to investigate the feasibility of the steering algorithm. According to the results, the proposed steering algorithm meets the objective of each steering mode.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.188-193
• /
• 2008

According to introduce KTX in Korea, rail-road bridge section of KTX was increased approximately 50% of the total length. Bridge is required periodic inspection and check to prevent accident and hazard because various damage which have effects on traffic and replacement of damaged parts is difficult. Specifically, the train as large-scale transportation because accidents led to great damage, preventing these accidents are critical. Well-organized management and maintenance systems are required to prevent the accidents. In the case of roadway bridge, bridge inspection vehicle is used to deploy inspectors in roadway bridge. However, this method requires a lot of time and efforts, and inspectors are exposed to potential hazard. Also, surrounding environment like poor lighting system or electric wire could harm the inspector while repairing. Due to this reason, automatic repairing and inspecting system have been introduced to replace the old methods. Management system of the railroad bridge track for trains uses various advanced equipments, but whereas roadway bridge management system is lacking these efforts. As a result of that, this study looks over the existing management method. and review the method to apply the Bridge Inspection Robot in railroad bridge. Moreover, this study suggests future management technology using inspection robot.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.1
• /
• pp.23-27
• /
• 2015

Nowdays, in order to reduce recent traffic accident the traffic accident research which uses IT techniques is plentifully advanced. But, when running away traffic accident occurs, the assault vehicle the searching is difficult very from site. Respected a traffic accident investigation scientification RFID techniques and type expense to use an ubiquitous theory constructs the traffic accident preventive system which is efficient the algorithm which proposed. Especially in this paper, It simulated that every hour changes road follows produces the optimum traffic safety speed which in situation and weather condition.