• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.1-8
• /
• 2018

PURPOSES : In this study, design elements of rest areas for drowsy drivers are classified and appropriate criteria for each design element are presented. METHODS : By comparing and analyzing the design criteria for rest areas, the most appropriate installation criteria were suggested by considering the driving patterns of rest area users. RESULTS : As a result of the study, elements influencing the design of rest areas for drowsy drivers are suggested such as installation location and installation type. In addition, proper separation distance between resting areas was suggested considering vehicle flow, users' fatigue and physiological needs. Other criteria for rest areas were also suggested. CONCLUSIONS : Proper safety facilities were not installed in rest areas because appropriate criteria were not established. In this study, design elements were derived and installation criteria were designed so that rest areas could be used safely and conveniently.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.77-86
• /
• 2005

In urban areas, new tunnel construction work is often taking place adjacent to existing piled foundations. In this case, careful assessment for the pile-soil-tunnel interaction is required. However, research on this topic has not been much reported, and currently only limited information is available. In this study, the complex pile-soil-tunnel interaction is investigated using the upper and lower bound methods based on kinematically possible failure mechanism and statically admissible stress field respectively. It is believed that the limit theorem is useful in understanding the complicated interaction behaviour mechanism and applicable to the pile-soil-tunnel interaction problem. The results are compared with numerical analysis. The material deformation patterns and strain data from the FE output are shown to compare well with the equivalent physical model tests. Admissible stress fields and the failure mechanisms are presented and used to develop upper and lower bound solutions to assess minimum support pressures within the tunnel.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.4
• /
• pp.17-24
• /
• 2001

Four road tunnels of which the construction conditions were similar were selected in the paper, and laboratory tests and rockmass classification for the tunnels were carried out. And the analysis was performed to find out the correlation between ratio of bit abrasion or drilling parameter and support pattern of tunnel using jumbo drill machine. It was analyzed that there was average abrasion of bit from 11.85% to 3.25% per support patterns of tunnel in four tunnels. Drilling parameter happens to fluctuate according to extent of fracture zone.

• Korean Journal of Organic Agriculture
• /
• v.9 no.4
• /
• pp.53-69
• /
• 2001

The word \"permaculture\" is a contraction of \"permanent agriculture\" or \"permanent culture\". Permaculture principles are designed to support (or ensure) the survival of humanity, the earth and all on it, and, to improve our standard of living, Permaculture can be defined as : a design system for creating sustainable human environments that can be (relatively) easily constructed and maintained. The principles of permaculture designs are relative location every element (such as house , rice paddy, road, esc) is placed in relation to each other such that each assists the other : each element performs multiple functions ; each function is supported by many elements : energy efficient planning ; using biological resources rather than fossil fuels : energy cycling on site (both fuel and human energy) : Using and accelerating natural plant succession to establish favourable sites and soils ; poly-culture and diversity of beneficial species for a productive, interactive system ; use of edge and natural patterns for best effect. These principles can be used for any permaculture design, in any climate, and at any scale. There has been very little scientific examination of Permaculture, and as such, it must be viewed as a design philosophy.viewed as a design philosophy.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.2
• /
• pp.102-111
• /
• 1997

For rational agricultural land use planning, it is quite necessary to get hold of land suitability precisely and to make decision on land use patterns accordingly. In the methodological viewpoint, objective and scientific evaluation techniques for land suitability classification should be supported for the systematic land use planning. As one of technical development approaches to rational land use planning, this study tried to frame a land suitability evaluation system for agricultural purposes. Evaluation unit is defined as a tract of land bounded by road, other land units and topographical features. And quantification theory was applied in the determination works of evaluation criteria. The administrative area of Namsa-myon(district), Yongin-si(city), Kyunggi-do(province) was selected for the case study. In order to check the feasibility of the evaluation system developed in the study, field check team, consisting of 2 government officers and 2 representative farmers, carried out evaluation works by observation on 148 sample land units, 10% of total 1,480 ones. Between estimated and observed results, there showed very good relationship of its multiple correlation coefficient, R=0.9467.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.147-154
• /
• 2013

PURPOSES: To analyze the specific factors of drivers behaviors that amount of cause the greenhouse gas emissions per vehicle. METHODS: Drivers behaviors at intersections are analyzed on the conditions of acceleration and deceleration. RESULTS : First, it is resulted greenhouse gas emissions per vehicle is produced more at intersections than at the main lines of highway. Second, it is resulted that the average speed, the average acceleration rate and the maximum speed are three major factors to produce greenhouse gas per vehicle in acceleration sections. Third, it is resulted that rapid deceleration 20m before entering intersections is the major factor to produce greenhouse gas per vehicle in deceleration sections. CONCLUSIONS: At intersections, sudden acceleration and deceleration is not good for greenhouse gas emissions. Thus, and the average speed, the average acceleration rate and the maximum speed are the chosen as factors to be controlled for drivers' behavior to reduce vehicles' greenhouse gas at intersections.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.153-156
• /
• 2004

As architects and interior designers work farther and farther afield, so the connection of buildings to the particular place they are constructed becomes increasingly. Also, during the past twenty years they have made a habit of asking probing and often uncomfortable questions about how architectural conventions force patterns of behavior. In place of bricks and mortar, they have mixed store, office, clinic, and residence. In this project, the buildings consist of pharmacy, store, dental clinic, oriental clinic and residence. This building was designed by architect to have panoramic views. The view of surrounding road from every wall becomes a constant point of reference, a back drop against which the whole house revolves. Now, all the words can be suitable for describing the oriental clinics. But the oriental clinics of these days may construct the unintentional common image, may be because of the clients sense about the finishing materials or colors in vogue. The Importance of identity in the design of oriental clinic becomes higher increasingly, and with the same reason, the conviction of interior designer.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.1
• /
• pp.58-64
• /
• 2004

In order to determine the level of safety on highway driving, the relationship between the psychophysiological signal and driving condition was investigated. In particular, a Demand-Effort model was conceptualized and used in this study to diagnose the suitability of driving by reading the patterns of psychophysiological signals. To run the model, threshold values were determined to categorize the high, moderate and low level of effort. To examine the sensitivity of the model, a cross-validation process was performed by collecting additional data. Further investigation need to be conducted to improve the sensitivity of the model for practical application.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.4
• /
• pp.325-332
• /
• 2004

Tire vibration modes are known to play a key role in vehicle ride and comfort characteristics. Inputs to the tire such as impacts, rough road surface, tire nonuniformities, and tread patterns can potentially excite tire vibration. In this study, experimental modal analysis on the tire with ground contact are performed by impacting the tire in the radial direction at the center of contact patch. To investigate which modes of tire influence the vibration of wheel and axle when the tire is in contact with ground, the vibration characteristics such as frequency response functions, natural frequencies and their mode shapes from tire to wheel/axle are examined.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.1
• /
• pp.8-15
• /
• 2011

This paper presents an effective method for detecting vehicles in front of the camera-assisted car during nighttime driving. The proposed method detects vehicles based on detecting vehicle headlights and taillights using techniques of image segmentation and clustering. First, in order to effectively extract spotlight of interest, a pre-signal-processing process based on camera lens filter and labeling method is applied on road-scene images. Second, to spatial clustering vehicle of detecting lamps, a grouping process use light tracking method and locating vehicle lighting patterns. For simulation, we are implemented through Da-vinci 7437 DSP board with visible light mono-camera and tested it in urban and rural roads. Through the test, classification performances are above 89% of precision rate and 94% of recall rate evaluated on real-time environment.