• The Journal of the Acoustical Society of Korea
• /
• v.28 no.7
• /
• pp.646-652
• /
• 2009

In this paper, welding pitch optimization technique of vehicle subframe is presented considering the fatigue life of spot welding nuggets. Fatigue life of spot welding nuggets is estimated by using the frequency-domain fatigue analysis technique. The input data, which are used in the fatigue analysis, are obtained by performing the dynamic analysis of vehicle model passing through the Belgian road profile and also the modal frequency response analysis of finite element model of vehicle subframe. According to the fatigue life result obtained from the frequency-domain fatigue analysis, the design points to optimize the weld pitch distance are determined. For obtaining the welding pitch combination to maximize the fatigue life of the spot welding nuggets, 4-factor, 3-level orthogonal array experimental design is used. This study shows that the optimized subframe improves the fatigue life of welding nugget with minimum fatigue life about 65.8 % as compared with the baseline design.

• Smart Structures and Systems
• /
• v.33 no.2
• /
• pp.145-163
• /
• 2024

The evaluation of dynamic characteristics of bridges under operational traffic loads is a crucial aspect of bridge structural health monitoring. In the vehicle-bridge interaction (VBI) system, the vibration responses of bridge exhibit time-varying characteristics. To address this issue, an accurate time-frequency analysis method that combines the autoregressive power spectrum based empirical wavelet transform (AR-EWT) and local maximum synchrosqueezing transform (LMSST) is proposed to identify the time-varying instantaneous frequencies (IFs) of the bridge in the VBI system. The AR-EWT method decomposes the vibration response of the bridge into mono-component signals. Then, LMSST is employed to identify the IFs of each mono-component signal. The AR-EWT combined with the LMSST method (AR-EWT+LMSST) can resolve the problem that LMSST cannot effectively identify the multi-component signals with weak amplitude components. The proposed AR-EWT+LMSST method is compared with some advanced time-frequency analysis techniques such as synchrosqueezing transform (SST), synchroextracting transform (SET), and LMSST. The results demonstrate that the proposed AR-EWT+LMSST method can improve the accuracy of identified IFs. The effectiveness and applicability of the proposed method are validated through a multi-component signal, a VBI numerical model with a four-degree-of-freedom half-car, and a VBI model experiment. The effect of vehicle characteristics, vehicle speed, and road surface roughness on the identified IFs of bridge are investigated.

• International Journal of Computer Science & Network Security
• /
• v.24 no.5
• /
• pp.1-10
• /
• 2024

Individuals with visual impairments face numerous challenges in their daily lives, with navigating streets and public spaces being particularly daunting. The inability to identify safe crossing locations and assess the feasibility of crossing significantly restricts their mobility and independence. Globally, an estimated 285 million people suffer from visual impairment, with 39 million categorized as blind and 246 million as visually impaired, according to the World Health Organization. In Saudi Arabia alone, there are approximately 159 thousand blind individuals, as per unofficial statistics. The profound impact of visual impairments on daily activities underscores the urgent need for solutions to improve mobility and enhance safety. This study aims to address this pressing issue by leveraging computer vision and deep learning techniques to enhance object detection capabilities. Two models were trained to detect objects: one focused on street crossing obstacles, and the other aimed to search for objects. The first model was trained on a dataset comprising 5283 images of road obstacles and traffic signals, annotated to create a labeled dataset. Subsequently, it was trained using the YOLOv8 and YOLOv5 models, with YOLOv5 achieving a satisfactory accuracy of 84%. The second model was trained on the COCO dataset using YOLOv5, yielding an impressive accuracy of 94%. By improving object detection capabilities through advanced technology, this research seeks to empower individuals with visual impairments, enhancing their mobility, independence, and overall quality of life.

• International Journal of Computer Science & Network Security
• /
• v.24 no.8
• /
• pp.14-20
• /
• 2024

Traffic sign recognition is an essential feature of intelligent transportation systems and Advanced Driver Assistance Systems (ADAS), which are necessary for improving road safety and advancing the development of autonomous cars. This research investigates the incorporation of the YOLOv9 model into traffic sign recognition systems, utilizing its sophisticated functionalities such as Programmable Gradient Information (PGI) and Generalized Efficient Layer Aggregation Network (GELAN) to tackle enduring difficulties in object detection. We employed a publically accessible dataset obtained from Roboflow, which consisted of 3130 images classified into five distinct categories: speed_40, speed_60, stop, green, and red. The dataset was separated into training (68%), validation (21%), and testing (12%) subsets in a methodical manner to ensure a thorough examination. Our comprehensive trials have shown that YOLOv9 obtains a mean Average Precision (mAP@0.5) of 0.959, suggesting exceptional precision and recall for the majority of traffic sign classes. However, there is still potential for improvement specifically in the red traffic sign class. An analysis was conducted on the distribution of instances among different traffic sign categories and the differences in size within the dataset. This analysis aimed to guarantee that the model would perform well in real-world circumstances. The findings validate that YOLOv9 substantially improves the precision and dependability of traffic sign identification, establishing it as a dependable option for implementation in intelligent transportation systems and ADAS. The incorporation of YOLOv9 in real-world traffic sign recognition and classification tasks demonstrates its promise in making roadways safer and more efficient.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.322-332
• /
• 2012

The objectives of this paper were to investigate home range, habitat selection, and threat factors of leopard cats (Prionailurus bengalensis) living in rural area of Korea. The results based on radio tracking of three leopard cats (two males and one female) can be summarized as follows. First, the average home range of leopard cats were $2.64{\pm}1.99km^2$ (Kernel 95) and $3.69{\pm}1.34km^2$ (MCP 100), and the average size of core areas was $0.64{\pm}0.47km^2$ (Kernel 50). The home range of a male leopard cat that radio-tracked in winter was the largest ($5.19km^2$, MCP 100). Second, the Johnson's habitat selection model based on the Jacobs index showed that leopard cats preferred meadows and paddy fields avoiding forest covers at the second level, whereas they preferred meadows adjacent to streams and avoided paddy fields at the third level. Finally, roadkill could be prime threat factor for the cat population. Therefore, habitats dominated by paddy fields, stream corridors with paved roads, and human settlements with insufficient forest patches could threaten the long-term viability of leopard cat populations. Thus the habitat managements for the leopard cat conservation should focus on the prevention of road-kill and the installation of wildlife passages in rural highways adjacent to stream corridors.

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.67-89
• /
• 2013

This study is to perform empirical analysis on observational before-after studies in Naive Method, Comparison Group(CG) Method and Empirical Bayes(EB) Method, and to compare with their results and to propose ways to apply to evaluation researches. For this purpose, the evaluation of road safety audit executed on Y$\breve{o}$ng-dong freeway in 2005 and 2006 was performed. As a result, all three methods have showed improved effects due to safety treatments. The safety effectiveness of Naive method is the largest, CG Method is the second and EB method is the last. The results of Naive method are overestimated due to the trend of reducing traffic accidents and those of CG method are affected by the external casual effects of comparison group. In the EB method, as "regression to the mean" phenomenon are controlled by reference group's accident model, it's result is relatively more accurate than that of other methods. In the conduct of evaluation studies, the analysts have to understand the pros and cons of each evaluation method. And after leading the survey on accident trends of related all sites, evaluation analysis is performed to be able to minimize bias.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.1
• /
• pp.11-27
• /
• 2017

The road network system of major domestic urban areas such as city of Seoul was rapidly developed and regionally expanded. In addition, many kinds of life-lines such as electrical cables, telephone cables, water&sewerage lines, heat&cold conduits and gas lines were needed in order for urban residents to live comfortably. Therefore, most of the life-lines were individually buried in underground and individually managed. The utility tunnel is defined as the urban planning facilities for commonly installing life-lines in the National Land Planning Act. Expectation effectiveness of urban utility tunnels is reducing repeated excavation of roads, improvement of urban landscape; road pavement durability; driving performance and traffic flow. It can also be expected that ensuring disaster safety for earthquakes and sinkholes, smart-grind and electric vehicle supply, rapid response to changes in future living environment and etc. Therefore, necessity of urban utility tunnels has recently increased. However, all of the constructed utility tunnels are cut-and-cover tunnels domestically, which is included in development of new-town areas. Since urban areas can not accommodate all buried life-lines, it is necessary to study the feasibility assessment system for utility tunnel by urban patterns and capacity optimization for urban utility tunnels. In this study, we break away from the new-town utility tunnels and suggest a quantitative assessment model based on the evaluation index for urban areas. In addition, we also develop a program that can implement a quantitative evaluation system by subdividing the feasibility assessment system of urban patterns. Ultimately, this study can contribute to be activated the urban utility tunnel.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.4
• /
• pp.23-33
• /
• 2012

Recently, landslide disasters caused by severe rain storms and typhoons have been frequently reported. Due to the geomorphologic characteristics of Korea, considerable portion of urban area and infrastructures such as road and railway have been constructed near mountains. These infrastructures may encounter the risk of landslide and debris flow. It is important to evaluate the highly risky locations of landslide and to prepare measures for the protection of landslide in the process of construction planning. In this study, a landslide-risk prediction equation is proposed based on the statistical analysis of 423 landslide data set obtained from field surveys, disaster reports on national road, and digital maps of landslide area. Each dataset includes geomorphologic characteristics, soil properties, rainfall information, forest properties and hazard history. The comparison between the result of proposed equation and actual occurrence of landslide shows 92 percent in the accuracy of classification. Since the input for the equation can be provided within short period and low cost, and the results of equation can be easily incorporated with hazard map, the proposed equation can be effectively utilized in the analysis of landslide-risk for large mountainous area.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.383-392
• /
• 1992

The objective of this study is to evaluate the impacts on the domestic timber supply potential of forest resources management policies such as the extention of forest management infrastruture and setting aside more forest lands for the provision of environmental goods. To this end, the domestic timber supply functions were estimated using time series data for the period 1970-1990 and were used to predict the future trends in timber production in the Republic of Korea. For this purpose, a set of scenarios based on the forest road density and forest inventory growth were designed for the next 40 years. The timber supply behavior in Korea was found to be different by species group : domestic supply of softwood roundwood is inelastic with respect to its ovum price while that of hardwood elastic. The effect of forest road construction on the domestic timber production seems to be insignificant yet. The model simulation aided by policy scenarios revealed that the future timber supply potential will be largely restricted if the policy option with emphasis on the provision of environmental goods from the forest resources were adopted.