• 한국연소학회지
• /
• 제21권4호
• /
• pp.1-5
• /
• 2016

The aim of this study is to compare the effectiveness of turbo chargers on engines for off-road use when combined with WGT and VGT technologies. The effectiveness of turbo chargers was measured and performance was compared using a functional model. Exhaust characteristics were compared using WGT and VGT technologies through a gas analyzer. Results showed VGT technology was more effective at high RPM compared to WGT technology. When it came to maximising turbo performance, VGT was more effective than WGT in every test. WGT and VGT produced similar exhaust NOx levels, whereas the VGT was more effective on the PM.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.239-245
• /
• 1993

Xinjiang locates on the Middle Eurasia. Droaght features Xinjiang's climate , especially during the spring sowing season. Therefore, efficiency irrigation system is indispensable to Xinjiang farming. Furrow orborder irrigation system has replaced flooding irrigation. In farmland , new irrigation methods have been developed and introduced to more fields. This article introduce tow sowing machines for new irrigation methods. (1) Furrow or border grain drill : (2) On-firm irrigation drill.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.43-48
• /
• 2011

• 한국연소학회지
• /
• 제19권2호
• /
• pp.15-20
• /
• 2014

Environmental regulations are being reinforced for the solution of environmental pollution, that are global issues. Exhaust gas regulations of off-road engines also demand stepwise reduction emission from beginning of Tier 4 interim(2013). Characteristically, Tier 4 regulation apply the NRTC mode which is a transient cycle. And technical studies using NRTC mode are uncommon. In this study, for satisfy the Tier 4 final regulation on the NRTC mode, experimental study was conducted using a 3.4 L off-road engine. Fuel injection timing and injector hole number are chosen as parameters for investigation of combustion and exhaust gas characteristics on off-road diesel engine.

• 대한기계학회논문집B
• /
• 제36권2호
• /
• pp.217-224
• /
• 2012

비도로용 차량의 경우 대부분 디젤엔진을 사용하여 엔진의 특성상 PM과 NOx의 배출이 많은 단점이 있다. 승용 및 상용 디젤 차량의 경우 CRDI 및 후처리 장치를 적용하였고 후처리 장치로 DOC/DPF를 장착함으로써 PM은 약 90% 이상 저감 가능하다. 상반관계인 NOx는 EGR 사용을 통해 1차적으로 NOx 배출량을 감소시키고 LNT, LNC, Urea-SCR 등의 DeNOx 시스템으로 NOx의 배출량을 보다 현저히 저감시켜 배기규제를 만족시키고 있다. 본 연구에서는 tier 4 interim 배기규제를 만족하기 위해 56kW급 오프로드 차량으로 연구를 진행하였다. NOx의 감소를 위해 WGT와 전자 제어방식의 HPL EGR 시스템을 적용하였고 CO와 THC, PM 배출가스를 줄이기 위해 DOC와 DPF를 사용하였다. EGR 시스템을 적용하기 위해 각 조건에 대한 기본 실험을 실시하여 EGR map을 작성하였다. 작성된 map을 NRTC 모드에서 시험하여 map의 적용성을 검증하고 tier 4 interim 배기규제 만족여부를 파악하였다.

• 한국유체기계학회 논문집
• /
• 제14권4호
• /
• pp.25-30
• /
• 2011

The jet fan is generally used to add thrust in the longitudinal ventilation system of road tunnel and the geometric conditions of jet fan such as the distance from tunnel wall have an effect on the performance of ventilation system. Numerical analyses on the flow in tunnel caused by operation of jet fan are presented to study the ventilation characteristics in tunnel. While the distance between jet fans in parallel installed in tunnel is changed 0.5 L/D to 3.0 L/D, the flowrate and mean velocity through tunnel are calculated for each cases. As the distance between jet fans increases, the flowrate through tunnel increases asymptotically and the momentum of tunnel flow is alike.

• 한국ITS학회 논문지
• /
• 제21권6호
• /
• pp.165-176
• /
• 2022

우리나라는 도로를 주행할 수 있는 지게차와 같은 건설기계가 유발하는 교통사고를 예방하기 위해 「건설기계관리법」 을 제정하여 건설기계의 안전성을 관리하고 있다. 하지만, 지금까지 건설기계로 인해 발생하는 교통사고에 관한 체계적인 관리는 일반 자동차에 비해 상대적으로 부족하였다. 본 연구에서는 건설기계 관리에 대한 해외 선진국 사례조사를 바탕으로 우리나라의 제도와 비교 분석하여 개선사항들을 도출하였다. 현황분석에서는 최근 5년간 전체 교통사고와 건설기계 교통사고의 추세를 제시하고, 건설기계 교통사고에 대한 사고유형별 특징과 사례를 통해 건설기계 교통사고가 발생하는 요인들을 분석하였으며, 도로이용자 인식조사를 통해 건설기계의 도로주행에 관한 의견을 수집하였다. 건설기계 면허를 취득하는 과정에서 발생되는 교육과정·시간에 대해 미준수하는 사례가 일부 발생하는 것이 확인되었으며, 운전면허증을 가지고 있지 않아도 건설기계를 도로에서 운행할 수 있었다. 이를 통해 제도적 허점을 보완하고 사후관리 대책 마련이 시급하며, 별도의 교통안전에 대한 교육과정 신설과 시설개선을 통해 안전한 도로주행 환경을 조성하는 것이 필요하다.

• 대한건축학회논문집:계획계
• /
• 제34권7호
• /
• pp.99-106
• /
• 2018

The purpose of this study is to examine adaptation types of urban tissue in Ipjeong-dong area, Seoul. Ipjeong-dong area has urban tissue those were made during Joseon dynasty and this is remaining even in the present time. This area was originally urban hanok residential districts till late 1950s. However, it has changed into machinery manufacture business area after demolition of Cheonggyechon shantytown. After several workshops and stores moved in this area, manufacturer and merchants required for more spaces due to lack of room for machinery. To place more workshops in the block, lot alteration were happened and accessibility to workshops inside the block were required. Adaptive road network which is main form of adaptative urban tissue were made to adapt in this kind of poor urban condition. To research about adaptive urban tissue making, distribution were explored and comparison tasks between various cadastral map of 1940, 1964, 1970s and 2017 were conducted. From these tasks, certain types of adaptive urban tissues and characteristics of these elements were found. First of all, forms of adaptive road depend on the surrounded environment. Connecting internal building corridor with original road system is categorized as Type A. Altering a portion of the buildings to make adaptive roads is categorized as Type B. Second, there were two types of formation of adaptive road. Type 1 is for adaptive road which is independent gesture from original road network. Type 2 is for adaptive road which is altering the form of original road network by lengthening or connecting two different dead-end roads.

• 한국연소학회지
• /
• 제21권3호
• /
• pp.32-38
• /
• 2016

This paper aims to predict oxidation amounts of catalyst and heat produced through passive regeneration on DPF according to different EGR rates and loads of off-road engines. Soot oxidation model and parameter assumption model were used for the test. Engine data were measureed with 25%, 50% and 75% of 1600 RPM loads and with 0% and 30% of EGR rates in order to estimate parameters. Oxygen levels calculated on the DPF downstream and oxygen levels measured were compared through all of the experimental conditions for validating the model. Oxidation rates on DPF according to different EGR rates and oxygen levels on the DPF downstream were estimateed successfully, which can be applied for off-road vehicles.

• 드라이브 ㆍ 컨트롤
• /
• 제21권1호
• /
• pp.53-58
• /
• 2024

With the recent development of intelligence and automation technologies for construction machinery, the demand for safety and efficiency of road-cutting operations has continued to increase. In response to this, a double-blade road cutter has been developed that can automatically cut roads. However, a double-blade road cutter has a load difference between the two blades due to the ground and wear conditions of the cutting blades. The difference in load between the two blades distorts the direction of travel of the cutter. In this study, a vision sensor-based driving guide technology was developed to correct the driving path of road cutters. In addition, we developed a load-sensing technology that detects blade loads in real-time and controls driving speed in the event of overload.