• 한국광학회지
• /
• 제4권4호
• /
• pp.474-479
• /
• 1993

Melt-spun법에 의해서 자왜특성을 갖는 Co-Fe-B ribbon을 제작한 후 광섬유 Mach-Zehnder 간섭계의 sensing-arm에 부착하여 간섭형 자계센서를 구성하였다. Co-Fe-B 자왜변환기로 구성된 자계센서의 동작실험 결과 ac 자왜 응답이 최대가 되는 dc 바이어스 자계는 출력이 0인 바이어스 지점으로부터 0.970e 정도 떨어져 있었으며, 최소 감지자장은 3kHz에서 3.9${\times}10^{-5}$ Oe(rms)/${\sqrt{Hz}}$였다. 응답이 최대가 되는 지점에 바이어스를 고정시켰을 때 ac 자계셈서의 출력이 포화되기 시작하는 입력 자계신호는 1 Oe(rms) 근처였다. Co-Fe-B 자왜변환기의 주파수 특성곡선에서 응답이 피크가 되는 주파수는 ~500Hz였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.511-519
• /
• 2016

This paper proposes a CMOS 6-bit phase shifter with low RMS phase and amplitude errors for an X-band phased array antenna. The phase shifter combines a switched-path topology for coarse phase states and a switch-filter topology for fine phase states. The coarse phase shifter is composed of phase shifting elements, single-pole double-throw (SPDT), and double-pole double-throw (DPDT) switches. The fine phase shifter uses a switched LC filter. The phase coverage is $354.35^{\circ}$ with an LSB of $5.625^{\circ}$. The RMS phase error is < $6^{\circ}$ and the RMS amplitude error is < 0.45 dB at 8-12 GHz. The measured insertion loss is < 15 dB, and the return losses for input and output are > 13 dB at 8-12 GHz. The input P1dB of the phase shifter achieves > 11 dBm at 8-12 GHz. The current consumption is zero with a 1.2-V supply voltage. The chip size is $1.46{\times}0.83mm^2$, including pads.

• 물과 미래
• /
• 제22권3호
• /
• pp.315-322
• /
• 1989

해양수치모형에 적용되는 상이한 방사조건을 포함한 개방경계조건의 영향이 $L^{2_}$-norm과 RMS오차해석에 의하여 비교되었다. 수치실험에서는 M2조석, 격자망의 영향, 해저마찰의 영향 등이 각각 고려되었다. 연구결과 개선방사조건이 고려될 때 단순한 구형만에서 해석해와 비교된 $M_2$조석의 경우는 방사조건이 고려되지 않을때보다 $L^{2_}$-norm에 의하면 40%, RMS오차에 의하면 96%나 신뢰성이 향상되었다. 이는 반격자를 이용할 때 보다도 더욱 만족스러운 결과인 것으로 나타났다. 해저마찰이 고려된 경우도 개선방사조건의 도입이 필요한 것으로 판단되었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1831-1840
• /
• 2018

During a power swing, distance relays may mistakenly spread fault throughout the power grid, causing a great deal of damage. In some cases, such mistakes can cause global outages. For this reason, it is critical to make a distinction between power swings and faults in distance relays. In this paper, a new method is proposed based on RMS measurement to differentiate between faults and power swings. The proposed method was tested on two standard grids, demonstrating its capability in detecting a power swing and simultaneous fault with power swing. This method required no specific configurations, and was independent of grid type and zoning type of distance relays. This feature in practice allows the relay to be installed on any grid with any kind of coordination. In protective relays, the calculations applied to the microprocessor is of great importance. Distance relays are constantly calculating the current RMS values for protection purposes. This mitigates the computations in the microprocessor to detect power swings. The proposed method was able to differentiate between a fault and a power swing. Furthermore, it managed to detect faults occurring simultaneously with power swings.

• Journal of Astronomy and Space Sciences
• /
• 제19권4호
• /
• pp.385-394
• /
• 2002

SLR(Satellite Laser Ranging)은 위성과 관측소간 거리를 가장 정밀하게 측정할 수 있는 시스템이다. 1964년 발사된 Beacon-B 위성의 궤도결정을 위해 SLR 기술이 처음 사용되었는데 거리측정 정밀도가 m 수준이었다. 현재 single shot 정밀도는 cm, NP(Normal Point)는 mm수준으로 발전하였다. 이 연구에서는 SLR을 이용한 궤도결정 알고리즘을 개발하여 GPS(Global Positioning System)-36위성의 정밀 궤도를 결정하였다. 알고리즘의 정밀도를 검증하기 위해 산출한 정밀 궤도를 IGS(International GPS Service)에서 제공하는 정밀 궤도력과 비교하였는데 74cm의 RMS(Root Mean Square)를 얻었다. 또한, SLR 시스템의 관측잔차 RMS는 55mm 미만으로 알려져 있지만 이 연구에서는 44mm 결과를 얻을 수 있었다.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.32-38
• /
• 1998

For the purpose of monitoring the abnormal state in proportion to cutting in automatic production process, the 3 kinds of specimens different from mechanical properties by austempering through temperature variation were manufactured, and the effects of tool wear on thrust and AE RMS was analyzed with sequential drilling in in-process. When the ADI specimens were drilled, the relationship of thrust and AE RMS with flank wear was studied through experiments, and it is confirmed that the reliable wear state is able to be monitored by using these signals. It was shown that thrust and AE RMS increased slowly till flank wear reached to V$_{B}$ = 0.25mm, and they increased steeply over the value. The effective tool exchange time was able to be pre-estimated by using this fact. It was validated that the tool breakage was able to be detected on the real time by monitoring in in-process.s.

• 한국측량학회지
• /
• 제17권3호
• /
• pp.283-292
• /
• 1999

본 논문에서는 대축척 항공 사진(1/5,000)을 촬영할 때 수신한 GPS 자료를 처리하여 결정한 항공 사진 카메라의 투영중심 위치를 이용한 항공삼각측량에 대해서 연구하였다. 항공삼각측량에 적용 가능성을 검토하기 위해 GPS자료를 처리하여 모델 조정법으로 결정한 투영중심의 위치와 비교하여 정확도 및 오차를 분석하였다. 또한, GPS 자료로 결정한 투영중심의 위치를 광속 조정법에 적용하였다. 기준국으로부터 30 km이내인 경우 L1 반송파 자료를 이용하여 결정한 투영중심 위치의 정확도는 일정하고, 4개의 기준점으로 평면(XY) 정확도(RMS)는 13 cm, 높이(Z) 정확도(RMS)는 15 cm로 수치지도 제작에 필요한 정확도를 얻을 수 있었다. 따라서, GPS를 항공삼각측량에 이용함으로써 경제적인 지도 제작 방안을 제시하였다.

• 방사선산업학회지
• /
• 제11권3호
• /
• pp.139-144
• /
• 2017

To evaluation of clinical usefulness for B1+RMS limits, we compared image quality of Routine, Specific absorption rate (SAR) and Root mean square (RMS) protocol. 5 volunteers underwent Magnetic Resonance Imaging (MRI) scan of the brain using three different protocols. We draw Region of interest ROI in cortex, white matter, gray matter, putamen and thalamus of axial plan. Signal to noise ratio (SNR) were evaluated in each area and Contrast to noise ration (CNR) were evaluated between white matter and gray matter. Qualitative evaluation was used to score each ROI. B1+RMS is confirmed its usefulness compared to conventional SAR standard on the aspect of improvement of image quality, reduction of scan time and easy adjusting parameter.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.251-257
• /
• 2019

This paper proposes a new measurement method using virtual power concept to measure the effective value of 3-phase voltage with variable frequency. The conventional effective value measurement method uses a method of integrating data sampled during one or half cycle of the power voltage and averaging it. In this method, since the effective voltage is calculated every cycle, a time delay occurs in the measured effective voltage and it is s a problem to measure the effective value of a device whose frequency varies from time to time, such as a generator. The proposed 3-phase voltage rms measurement method has an advantage that it can measure accurate voltage RMS value regardless of measurement frequency variation. In particular, there is an advantage in that it is possible to measure a 3-phase effective voltage rather than an average value of the effective voltage of each phase in a 3-phase unbalance voltage. In addition, the validity of the proposed method is verified by using the Psim simulation tool and the experimental results are analyzed by applying the proposed measurement algorithm to the actual three phase synchronous generator voltage measurement experiment.

• 한방재활의학과학회지
• /
• 제24권1호
• /
• pp.83-92
• /
• 2014

Objectives To evaluate the clinical usefulness between muscle energy techniques (MET) and transcutaneous electrical nerve stimulator (TENS), we performed both on elector spinae muscle of acute low back pain patients. Methods After performing MET and TENS, we compared both in terms of electrical activity. We performed MET or TENS on elector spinae muscle of acute low back pain patients in each group (n=15,15). After performing MET or TENS, we analyzed root mean square (RMS), median edge frequency (MEF) and asymmetry index (AI). Results 1. After performing MET on elector spinae muscle of acute low back pain patients, RMS was significantly decreased compared with before (p<0.005). 2. After performing TENS on elector spinae muscle of acute low back pain patients, RMS was significantly decreased compared with before (p<0.005). 3. After performing MET on elector spinae muscle of acute low back pain patients, asymmetric index was significantly decreased compared with before (p<0.05). Conclusions According to above results, performing MET on elector spinae muscle of acute low back pain patients has effect in terms of RMS and asymmetric index. And performing TENS on elector spinae muscle of acute low back pain patients also has similar effect in terms of RMS but has not in terms of asymmetric index.