• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.15-24
• /
• 2014

It is difficult to analytically derive a volumetric displacement formula for a gerotor hydraulic motor due to the complexity of the geometric shape of its gear lobes. This work proposes an analytical method for the volumetric displacement, a relatively easy method based upon two physical concepts: conservation between hydraulic energy and mechanical shaft energy, and torque equilibrium for the rotor's motion. The first research using these concepts was conducted on inner and outer rotors rotating with respect to each rotor axis. This work represents the second report conducted on an inner rotor revolving as a planetary motion on the stationary outer rotor. The formula equations regarding the volumetric displacement and flow rate are derived, and the proposed formula about the volumetric displacement is proven to be the same as another analytical displacement formula: the so-called vane length method. From the formula, volumetric displacement is calculated for an example geometry of the gear lobes. The resultant displacement is confirmed to be the same as the value calculated from the chamber volume method. The proposed analytical formula can be utilized in the analysis and design of gerotor hydraulic motors. Because it is based on torque equilibrium, this formula can provide a better understanding of torque performance, such as torque ripple, in designing a gerotor type motor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.136-144
• /
• 2010

This paper presents the two-switch interleaved active clamp forward converter, which is mainly composed of two active clamp forward converters. Only two switches are required, and each one is the auxiliary switch for the other. So, the circuit complexity and cost are reduced and control is more simple. An additional resonant inductance is employed to achieve ZVS(Zero-Voltage-Switching) during the dead times. Interleaved output inductor currents diminish the voltage and current ripple. Accordingly, the smaller output filter and capacitors lower the converter volume. This research proposed the Two-switch interleaved Active Clamp Forward Converter characteristic. The principle of operation, feature and design considerations is illustrated and the validity of verified through the experiment with a 160[W] based experimental circuit.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.5
• /
• pp.400-409
• /
• 2001

A new phase-shifted parallel-input/series-output(PISO) dual converter for tush-power step-up applications has been proposed. Since the proposed converter shows a low switch turn-off voltage stress, switching devices with low conduction loss can be employed in order to improve the power conversion efficiency. Moreover, it features a low output capacitor root-mean-square(RMS) current stress, low input current and output voltage ripple contents, and fast control-to-output dynamics compared to its PWM counterpart. In this paper, the operation of the proposed converter is analyzed in detail and its mathematical models and steady-state solutions are presented. A comparative analysis with the conventional PWM PISO dual converter is also provided. To confirm the operation, features, and validity of the Proposed converter, experimental results from an 800W, 24-350Vdc prototype are presented.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.457-465
• /
• 2011

The fault analysis and detecting algorithm for a 3 phase diode rectifier is proposed. The 3 phase dioderectifier is used for the AC power rectifier of the PWM inverter. The input power or diode faults cause theripples of the DC voltage, degradation of the control performance and life shortening of the DC link capacitor.In this paper, the ripple of the DC voltage is mathematically analyzed for the earth fault of input power andopen circuit fault of the diode, respectively. The fault detection and type of fault can be obtained by comparingthe average DC voltage and the instant DC voltage which is sampled with 6 times of grid frequency. Theproposed method can be easily applicable and doesn't require additional circuit. The experimental and simulationresults are presented to verify the validity of the proposed method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.304-310
• /
• 2016

This paper proposes a fault diagnosis method for an open-fault in inverter driving five-phase induction motor. The five-phase induction motor has a high output torque and small torque ripple in comparison to three-phase. The best advantage of the five-phase induction motor is fault diagnosis and tolerant control using redundancy of phases. This paper uses an inverter as a power converter for driving a five-phase induction motor. If a switch of inverter occurs to the open-fault, this problem is the influence on the output current and output torque. To solve this problem, there is need of an accurate diagnosis and fault switch distinction. Therefore, this paper propose a fault detection method of the open-fault switches for the fault diagnosis. First, analyzing the pattern for the open-circuit fault of one phase. next, analyzing the pattern for the open-circuit fault of each inverter switches. Through the pattern analysis, It defines the scope of each of the failure switch. Thereafter, By using an algorithm that proposes to perform a fault diagnosis method. The proposed algorithm is verified from the experiment with the 1.5 kW five-phase induction motor.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.4
• /
• pp.267-275
• /
• 2012

Objectives: This study was conducted to assess the potential health impacts and improve the quality of the free immunization program in Jinju City by maximizing the predicted positive health gains and minimizing the negative health risks. Methods: A steering committee was established in September 2010 to carry out the health impact assessment (HIA) and began the screening and scoping stages. In the appraisal stage, analysis of secondary data, a literature review, case studies, geographic information systems analysis, a questionnaire, and expert consultations were used. The results of the data collection and analyses were discussed during a workshop, after which recommendations were finalized in a written report. Results: Increased access to immunization, comprehensive services provided by physicians, the strengthened role of the public health center in increasing immunization rates and services, and the ripple effect to other neighboring communities were identified as potential positive impacts. On the other hand, the program might be inaccessible to rural regions with no private clinics where there are more at-risk children, vaccine management and quality control at the clinics may be poor, and vaccines may be misused. Recommendations to maximize health gains and minimize risks were separately developed for the public health center and private clinics. Conclusions: The HIA provided an opportunity for stakeholders to comprehensively overview the potential positive and negative impacts of the program before it was implemented. An HIA is a powerful tool that should be used when developing and implementing diverse health-related policies and programs in the community.

• Osong Public Health and Research Perspectives
• /
• v.9 no.6
• /
• pp.314-324
• /
• 2018

Objectives: The aim of this study was to analyze research and development projects in mental health services in Korea, using priority evaluation of mental health promotion policies to determine direction of the service. Methods: An online survey was conducted that targeted experts in the mental health service regarding promotion of mental health in Korea in 2016. The survey was based on 32 policy projects that resulted from 12 strategies according to 4 policy objectives. Results: Analysis of 32 mental health projects were assessed regarding the possibility of technology development success, magnitude of the ripple effect, and necessity of a national response. It was observed that 3 policy projects relevant to suicide, had a high relative priority. This was followed by policies for improvement of health insurance and the medical benefit cost system, and policies for reinforcement of crisis psychological support such as those for disaster victims. Conclusion: The prioritization of mental health services should place an emphasis on promotion of a healthy mental lifestyle, rehabilitation support for patients with serious mental illness, and reinforcement of social safety networks for suicide prevention.

• Journal of Digital Convergence
• /
• v.19 no.6
• /
• pp.53-60
• /
• 2021

The purpose of this study is to examine the terms and components related to the proper use of YouTube. The Delphi was conducted on 11 panels and the results are as follows. First, as a result of examining how the use of YouTube will change in the future, it is agreed that it will be used more actively and more diverse than now, but that maladaptive problems such as fake news and addictive use will occur. Second, the terminology of proper/improper use of Youtube was derived as 'adaptive use' and 'maladaptive use'. Third, as a result of the components of adaptive use of YouTube, it is that were 'Information and content sorting ability', 'Self-regulation ability', 'Information acquisition and delivery ability', 'Understanding motivation and desire to use', 'Time-of-use control ability', 'Consideration of ripple effect'. Finally, the implications and limitations of this study were discussed.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.95-103
• /
• 2022

In this paper, the efficiency of a sensorless method with square-wave injection for a low-cost inverter, so called B4 inverter is presented. This inverter comprises only 4 switches to reduce system cost. It is distinguished from the conventional B6 inverter that has 6 of switching elements. The B4 inverter, injected a 1 kHz of harmonic wave, has been modelled using the functions and library in Matlab/Simulink. This paper described each component of sensorless algorithm. Among them, the Notch Filter is used to extract the harmonic component of the phase current and a second-order low-pass filter was used to reduce the ripple of the estimated speed. It is shown through simulation that the rotor angle of a permanent magnet synchronous motor is detected by multiplying the current waveform extracted using the notch filter by the harmonic voltage. The feasibility of the proposed method is shown through Simulink simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.239-245
• /
• 2016

In this study, a 12 V PWM boost converter was designed with the optimal values of the external components of the power stage was well as the compensation stage for smart electronic applications powered by a battery device. The 12 V boost PWM converter consisted of several passive elements, such as a resistor, inductor and capacitor with a diode, power MOS switch and control IC chip for the control PWM signal. The devices of the power stage and compensation stage were designed to maintain stable operation under a range of load conditions as well as achieving the highest power efficiency. The results of this study were first verified by a simulation in SPICE from calculations of the values of major external elements comprising the converter. The design was also implemented on the prototype PCBboard using commercial IC LM3481 from Texas Instruments, which has a nominal output voltage of 12 V. The output voltage, ripple voltage, and load regulation with the line regulation were measured using a digital oscilloscope, DMM tester, and DC power supply. By configuring the converter under the same conditions as in the circuit simulation, the experimental results matched the simulation results.