An analysis of a phase- shifted parallel-input/series-output dual converter for high-power step-up applications

대용량 승압형 위상천이 병렬입력/직렬출력 듀얼 컨버터의 분석

  • 강정일 (KAIST 전기 및 전자공학과) ;
  • 노정욱 (삼성전자 DTV 일류화 추진실 Core Technology 그룹 책임연구원) ;
  • 문건우 (한국과학기술원 전자전산학과 전기 및 전자공학전공) ;
  • 윤명중 (한국과학기술원 전기 및 전자공학과)
  • Published : 2001.10.01

Abstract

A new phase-shifted parallel-input/series-output(PISO) dual converter for tush-power step-up applications has been proposed. Since the proposed converter shows a low switch turn-off voltage stress, switching devices with low conduction loss can be employed in order to improve the power conversion efficiency. Moreover, it features a low output capacitor root-mean-square(RMS) current stress, low input current and output voltage ripple contents, and fast control-to-output dynamics compared to its PWM counterpart. In this paper, the operation of the proposed converter is analyzed in detail and its mathematical models and steady-state solutions are presented. A comparative analysis with the conventional PWM PISO dual converter is also provided. To confirm the operation, features, and validity of the Proposed converter, experimental results from an 800W, 24-350Vdc prototype are presented.

대용량 승압형 응용을 위한 새로운 위상천이 병렬입력/직렬출력 듀얼 컨버터가 제안된 바 있다. 제안된 컨버터는 종래의 펄스 폭 변조(PWM) 방식의 병렬입력/직렬출력 듀얼 컨버터에 비해 낮은 스위치 전압 스트레스를 보여 저 손실의 소자를 사용할 수 있으므로 높은 효율을 보인다. 또한, 출력 캐패시터의 실효(RMS) 전류 스트레스가 낮고 입력 전류와 출력 전압의 맥동이 작으며, 제어 입력에 대한 출력 전압의 동역학(dynamics)이 빠른 장점이 있다. 본 논문에서는 제안된 컨버터의 정상상태 동작을 심도 있게 분석하고 그 수학적 모델 및 정상상태 해를 제시하며, 제안된 컨버터의 특징을 종래의 PWM 방식의 컨버터와의 비교를 통해 정량적으로 분석한다. 또한, 제안된 회로의 동작, 특성 및 유효성을 검증하기 위해 800W급 24-350Vdc 사양의 시작품으로부터의 실험 결과를 제시한다.

Keywords

References

  1. IEEE Transactions on Energy Conversion v.3 no.1 A Feasibility Study of Photovoltaic-Fuel Cell Hybrid Energy System S. Rahman;K-S Tam
  2. IEEE Aerospace and Electronics Systems Magazine v.12 no.3 Fuel Cell Status: 1996 J. H. Hirschenhofer
  3. IEEE Applied Power Electronics Conference Records The Market for Distributed Power Systems C. C. Heath
  4. Power Switching Converters S. S. Ang
  5. 전력전자학술대회 논문집 새로운 위상전이 병렬입력/직렬출력 모듈화를 적용한 듀얼 컨버터 강정일;노정욱;한상규;윤명중
  6. IEE Proceedings-B v.140 no.2 Modular DC-DC Convertor for High-output Voltage Applications S. N. Manias;G. Kostakis
  7. IEEE Trans. on Industrial Electronics v.40 no.1 A Current-Sourced DC-DC Converter Derived via the Duality Principle from the Half-Bridge Converter P. J. Wolfs
  8. IEEE International Telecommunications Energy Conference Records A Comparison Between Two Current-Fed Push-Pull DC-DC Converters: Analysis, Design and Experimentation W. C. P. De Aragao Filho;I. Barbi
  9. IEEE Power Electronics Specialists Conference Records A General Unified Approach to Modelling Switching-Converter Power Stages R. D. Middlebrook;S. Cuk