• 한국정보과학회논문지:시스템및이론
• /
• 제29권9호
• /
• pp.503-513
• /
• 2002

CC-NUMA구조에서는 원격 메모리에 대한 접근이 불가피한 구조적인 특성 때문에 상호 연결망이 성능을 좌우하는 큰 변수로 작용한다. 기존에 사용되는 버스는 대역폭의 한계와 물리적 확장성 때문에 대규모의 시스템에는 적합하지 않다. 이를 대체하는 고속의 지점간 링크를 도입한 이중 링 구조는 이러한 버스의 한계를 극복하고는 있지만 많은 노드를 거쳐야 하는 문제로 인해 응답 지연 시간이 증가하는 단점을 안고 있다. 본 논문에서는 요청과 응답 패킷의 지연 시간을 줄이는 방안으로 리피터 노드를 이용한 다중 링을 제안한다. 제안된 시스템은 링과 링 사이의 구조가 대칭형을 이루고 있어 요청을 내보내는 링을 제외한 다른 링의 hop수는 똑같은 수치를 갖고 있으며, 이중 링에 비해 최대의 hop수와 최소의 hop수의 차가 적고 평균 hop수 또한 적어 좋은 성능을 보인다. 본 논문에서는 또한 이러한 구조를 유지하기 위한 리피터 노드의 구조를 제안하며 리피터 노드의 구조와 노드의 확장에 따른 다양한 성능을 확률 구동 시뮬레이터를 사용하여 평가를 수행한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.1003-1019
• /
• 2019

Threshold ring signature scheme enables any t entities from N ring members to spontaneously generate a publicly verifiable t-out-of-N signature anonymously. The verifier is convinced that the signature is indeed generated by at least t users from the claimed group, but he cannot tell them apart. Threshold ring signatures are significant for ad-hoc groups such as mobile ad-hoc networks. Based on the lattice-based ring signature proposed by Melchor et al. at AFRICRYPT'13, this work presents a lattice-based threshold ring signature scheme, employing the technique of message block sharing proposed by Choi and Kim. Besides, in order to avoid the system parameter setup problems, we proposed a message processing technique called "pad-then-permute", to pre-process the message before blocking the message, thus making the threshold ring signature scheme more flexible. Our threshold ring signature scheme has several advantages: inherits the quantum immunity from the lattice structure; has considerably short signature and almost no signature size increase with the threshold value; provable to be correct, efficient, indistinguishable source hiding, and unforgeable.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.886-898
• /
• 2015

The design feasibility of a micro unidirectional DC transmission system based on an input-parallel output-parallel (IPOP) converter is analyzed in this paper. The system consists of two subsystems: an input-parallel output-series (IPOS) subsystem to step up the DC link voltage, and an input-series output-parallel (ISOP) subsystem to step down the output voltage. The two systems are connected through a transmission line. The challenge of the delay caused by the communication in the control system is addressed by introducing a ring communication structure, and its influence on the control system is analyzed to ensure the feasibility and required performance of the converter system under practical circumstances. Simulation and experiment results are presented to verify the effectiveness of the proposed design.

• 대한화학회지
• /
• 제54권6호
• /
• pp.841-843
• /
• 2010

• 대한수학회보
• /
• 제30권1호
• /
• pp.71-77
• /
• 1993

Every ring considered in the paper will be assumed to be commutative and have a unit element. An ideal A of a ring R will be called primal if the elements of R which are zero divisors modulo A, form an ideal of R, say pp. If A is a primal ideal of R, P is called the adjoint ideal of A. The adjoint ideal of a primal ideal is prime [2]. The definition of primal ideals may also be formulated as follows: An ideal A of a ring R is primal if in the residue class ring R/A the zero divisors form an ideal of R/A. If Q is a primary idel of a ring R then every zero divisor of R/Q is nilpotent; therefore, Q is a primal ideal of R. That a primal ideal need not be primary, is shown by an example in [2]. Let R[X], and R[[X]] denote the polynomial ring and formal power series ring in an indeterminate X over a ring R, respectively. Let S be a multiplicative system in a ring R and S$^{-1}$ R the quotient ring of R. Let Q be a P-primary ideal of a ring R. Then Q[X] is a P[X]-primary ideal of R[X], and S$^{-1}$ Q is a S$^{-1}$ P-primary ideal of a ring S$^{-1}$ R if S.cap.P=.phi., and Q[[X]] is a P[[X]]-primary ideal of R[[X]] if R is Noetherian [1]. We search for analogous results when primary ideals are replaced with primal ideals. To show an ideal A of a ring R to be primal, it sufficies to show that a-b is a zero divisor modulo A whenever a and b are zero divisors modulo A.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1492-1499
• /
• 2004

In this paper, defect formation in ring rolling is revealed by computer simulation of ring rolling processes. The rigid-plastic finite element method is employed for this study. An analysis model having relatively fine mesh system near the roll gap is used for reducing the computational time and a scheme of minimizing the volume change is applied. The formation of the central cavity formation defect in ring rolling of a taper roller bearing outer race and the polygonal shape defect in ring rolling of a ball bearing outer race has been simulated. It has been seen that the results are qualitatively good with actual phenomena.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.102-110
• /
• 1998

The analysis of lateral hydrodynamic forces in the leakage path between a shrouded pump impeller through wear-ring seal and its housing is presented. Governing equations are derived based on Bulk-flow and Hirs' turbulent lubrication model. By using a perturbation analysis and a numerical integration method, governing equations are solved to yield leakage and rotordynamic coefficients of force developed by the impeller shroud and wear-ring seal. The variation of rotordynamic coefficients of pump impeller shroud and wear-ring seal is analyzed as parameters of rotor speed, pressure difference, shroud clearance, wear-ring seal clearance, and circumferential velocity at the entrance of impeller shroud for a typical multi-stage centrifugal pump.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2042-2044
• /
• 2001

The jumping ring apparatus of the type described in this study is used to demonstrate and educate the effects of electromagnetic induction. Placing an aluminum ring over the core and switching on AC source causes the ring to jump in the air due to induced currents in the ring producing a magnetic field opposed to that produced in the core. If the AC current is slowly increased from zero or ring is placed over the core when AC is already flowing the ring floats due to the balance between its weight and the upward electromagnetic force. Pentimum computer is used to display this value to screen and generate control signal.

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.38-41
• /
• 2010

We design and fabricate a widely tunable laser diode made of InGaAsP-InP. The diode is monolithically integrated with a wavelength-selective coupled-ring reflector and semiconductor amplifiers. For realization of a compact size device, deeply etched multi-mode interference couplers and square ring resonators composed of total-internal-reflection mirrors are adopted and fabricated using a self-aligned process. It is demonstrated that the laser diode exhibits single mode operation and 16 nm tuning range with side-mode-suppression-ratio exceeding 20 dB.

• 항공우주시스템공학회지
• /
• 제11권1호
• /
• pp.28-34
• /
• 2017

유한요소해석을 이용하여 이물질이 고무 오링과 구조물에 미치는 영향과 성능을 연구했다. 오래전부터 2D 해석을 이용하여 초탄성 오링을 연구해왔다. 오링 설계 시, 접촉응력은 중요한 설계 요소이다. 접촉 응력이 가해진 압력보다 낮으면 누수, 진동, 소음, 출력 저하의 원인이 된다. 이 연구에서는 초탄성 오링을 2D와 3D로 해석하고 결과를 비교한다. 2D와 3D의 접촉 응력 결과는 거의 비슷하게 나타난다. 이물질이 있는 오링은 3D로 모델링해야하는데 모든 방향의 접촉 응력을 고려해야하기 때문이다. 3D 해석에서 간극을 달리하여 10가지 경우로 나누어 이물질이 오링과 구조물에 미치는 영향을 확인했다. 또한 접촉 응력이 가해진 압력보다 높은지 확인하였다. 따라서, 이물질이 포함된 오링은 3D 모델로 해석되어야하며 이러한 결과는 오링 설계에 포함된다.