• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.10
• /
• pp.713-719
• /
• 2013

Power MOSFET operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. We have optimal designed planar and trench gate power MOSFET for high breakdown voltage and low on resistance. When we have designed $6,580{\mu}m{\times}5,680{\mu}m$ of chip size and 20 A current, on resistance of trench gate power MOSFET was low than planar gate power MOSFET. The on state voltage of trench gate power MOSFET was improved from 4.35 V to 3.7 V. At the same time, we have designed unified field limit ring for trench gate power MOFET. It is Junction Termination Edge type. As a result, we have obtained chip shrink effect and low on resistance because conventional field limit ring was convert to unify.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.1
• /
• pp.30-36
• /
• 2003

Brittle materials such as glasses and ceramics, which are very weak under impact loading, show fragile failure mode due to their low fracture toughness and crack sensitivity. When brittle materials are subjected to impact by small spheres, high contact pressure occurs at the impacted surface causing local damage on the specimen. This damage is a dangerous factor in causing the final fracture of structures. In this research, the crack propagation process of soda-lime glass by the impact of small spheres is explained and the effects of several constraint conditions for impact damage were studied by using soda-lime glass; that is, the effects for the materials and sizes of impact ball, thickness of specimen and residual strength were evaluated. Especially, this research has focused on the damage behavior of ring cracks, cone cracks and several other kinds of cracks.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.80-91
• /
• 1994

This study aims detecting forming defects for the forming process of bearing rings, which is designed by an industry expert. The designed process consists of one forming operation for the outer ring and four operations for the inner ring. The thickness of the sheet used is 1.6mm, and is in between of thin sheet and bulk material. Here the rigid-plastic finite element method is applied to the analysis and design of the process without considering anisotropy of thin sheet. Thinning and folding defects are detected if the initially designed process is applied for manufacturing. so a new process is designed by referring the results of the FEM. It is confirmed that the industry expert agree the possibility of defects derived from FEM results.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.485-487
• /
• 2006

This paper describes a frequency synthesizer designed in a $0.25{\mu}m$ CMOS technology for using local oscillators for the IF stages. The design is focused mainly on low-power characteristics. A simple ring-oscillator based VCO is used, where a single control signal can be used for variable resistors. The designed PLL includes all building blocks for elimination of external components, other than the crystal, and its operating frequency can be programmed by external data. It operates in the frequency range of 250MHz to 800MHz and consumes l.08mA at 500MHz from a 2.5V supply. The measured phase noise is -85dBc/Hz in-band and -105dBc/Hz at 1MHz offset. The die area is $1.09mm^2$

• Transactions of Materials Processing
• /
• v.3 no.2
• /
• pp.189-201
• /
• 1994

This study aims detecting forming defects for the forming process of bearing rings, which is designed by and industry expert. The designed process consists of one forming operation for the outer ring and four operations for the inner ring. The thickness of the sheet used is 1.6mm, and is in between of thin sheet and bulk material. Here the rigid-plastic finite element method is applied to the analysis and design of the process without considering anisotropy of thin sheet. Thinning and folding defects are detected if the initially designed process is applied for manufacturing. So a new process is designed by referring the results of the FEM. It is confirmed that the industry expert agree the possibility of defects derived from FEM results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1322-1327
• /
• 2005

This paper presents a single-stage ZVT full-bridge AC/DC converter for aerospace applications. The detailed operating principle and design consideration of this soft-switched converter are analyzed and described. The proposed circuit topology and control scheme are proposed to exhibit optimum performances (i.e. high power factor, high efficiency, ring-free and low EMI features). A laboratory prototype, 500W 5V/100A AC/DC converter was implemented. The simulation and experimental waveforms verify the feasibility of the proposed design.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.124-131
• /
• 2013

The innovative designer and structural engineer, Cecil Balmond is co-representative of Ove Arup and has been co-worked with world-famous architects and has been influenced so much on architectural thinking. These days he extended his career as an architect. Moreover, he has been noticed through a few publishing by his own architectural thinking. He is describing the World with his unique insight based on structural perspectives, which have much common grounds with that of Deulezian philosophy. It is especially valuable to study the relationship between his thinking of Interior-Exterior Ring and Deleuzian thinking of Virtual Circulation for understanding more clearly about structural and compositional principle how world is composed of. The Ring is circulationg from interior to exterior which is similar with Deleuzian concept that the Smooth and the Striated is circulationg mutually. Seamless flight line would be ceaseless creative virtual process to actuality.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.489-490
• /
• 2008

This paper describes the analysis of electric field distribution of high voltage polymeric bushing with structure. The high voltage bushing consists of FRP tube and housing made of LSR. The field control can be achieved by means of the design of such internal field shaper and top corona ring as grading electrodes. In accordance, the optimized design uses both internal and external elements for electric stress grading at critical parts of the bushing. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymeric bushing.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.6
• /
• pp.300-304
• /
• 2004

We have proposed the junction termination design employing shallow trench filled with silicon dioxide and field limiting ring (FLR). We have designed trenches between P+ FLRs to decrease the junction termination radius without sacrificing the breakdown voltage characteristics. We have successfully fabricated and measured improved breakdown voltage characteristics of the Proposed device for 1200 V-class applications. The junction termination radius of the proposed device has decreased by 15%-21% compared with that of the conventional FLR at the identical breakdown voltage. The junction termination area of the proposed device has decreased by 37.5% compared with that of the conventional FLR. The breakdown voltage of the proposed device employing 7 trenches was 1156 V, which was 80% of the ideal parallel-plane .junction breakdown voltage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.903-905
• /
• 2005

Theoretical expressions are introduced to achieve low phase-noise ring oscillators. Understanding of the relations between the phase-noise and the design parameters leads to the reduction of the phase-noise at the stage of the circuit design. Using expressions from reference, ways of reducing the phase noise are suggested.