• 제목/요약/키워드: Rigidity analysis

검색결과 576건 처리시간 0.023초

편심압축이 작용하는 HCFT기둥에 대한 내력특성과 모멘트-곡률의 곤계 (Strength and Moment-Curvature Relationship of HCFT Columns under Eccentric Load)

  • 이승조;박정민;김화중
    • 콘크리트학회논문집
    • /
    • 제14권6호
    • /
    • pp.864-873
    • /
    • 2002
  • 현재의 CFT기둥 구조에 대한 연구는 대부분 강재측 측면에서 접근한 연구와 강관 내부에 충전되는 콘크리트의 충전성 등과 같은 시공적 측면에 대한 연구성과가 주류로 되고 있으며, 콘크리트 측면에서의 연구는 미흡한 실정이다. 이것에 대한 연구를 중심으로 HCFT 기둥이 축력아래에서 단주가 동일한 휨-모멘트를 받을 때의 변형성능(M-ø)에 대하여 해석적으로 수치적인 값을 검토하였다. 그리고, 기본적인 가정을 바탕으로 실험에서 얻은 CFT 단면의 변형성능의 해석에 대하여 모멘트-축력-곡률관계의 해석 프로그램의 개발(C-Language)을 실시하였다. 따라서, 본 연구에서는 폭-두께비(D/t), 세장비(λ), 콘크리트의 종류를 주요변수로 하여 편심하중 아래에서의 강도 600kgf/$\textrm{cm}^2$를 충전한 HCFT 기둥에 대한 내력 및 곡률과 같은 구조적 특성을 고찰하였으며, AISC-LRFD, AIJ, Tokanori Sato의 식을 이용한 내력설계식의 비교분석을 실시하였다. 본 연구에서 검토한 내력 및 곡률은 향후 HCFT 기둥에 대한 내력설계식의 제안 및 해석에 유용하게 적용될 수 있을 것으로 사료된다.

접합요소에 의한 Vertical Drain Well 지반의 변형해석 - 모델지반과 실제 Sand Drain Well 지반을 중심으로 - (Deformation Analysis of Soft Foundation with Vertical Drain Wells using the Interface Element Method -With Emphasis on Model Foundation and Actual Sand Drain Well Foundation-)

  • 이진수
    • 대한토목학회논문집
    • /
    • 제13권4호
    • /
    • pp.227-237
    • /
    • 1993
  • 본 연구는 vertical drain well 설치지반의 보다 더 실제적이고 합리적인 변형해석을 목적으로 drain well 타설로 인하여 발생하는 well 주변 점토층의 교란(smear)영향, well과 인접점토층의 강성차이에서 오는 접합면 변형의 불연속거동 표현이 가능한 유한요소해석 방법을 제시하고자 하는데 목적이 있다. 유한요소해석의 구성은 변형의 지배방정식으로서 Biot의 압밀이론을 근간으로 여기에 흙의 구성식과 접합요소이론을 결합하여 이루어진다. 본 논문에서 제시한 해석법의 정도는 Siriwardane과 Ghaboussi 등이 사용한 지반에 적용하여 검증한 바 있다. 여기에서는 이를 다시 모델지반과 실제지반에 대해서 유한요소해석법을 적용하여 강성이 다른 이질재료간 경계에서의 불연속변형의 영향에 따른 지반내 거동특성을 살펴보고 이것을 함께 고려한 해석법의 정도를 알아보고자 한 것이다. 그 결과는 침하에 있어서 매우 만족스럽다고 보아지지만 간극수압등에는 잘 일치하지 않는 점이 있어 앞으로의 더 많은 연구가 필요하다고 판단된다.

  • PDF

The Effect of Seat Incline Angle in Hemiplegic Patients' Standing up Training

  • Sim, Woo Sang;Jung, Kwang Tae;Won, Byeong Hee
    • 대한인간공학회지
    • /
    • 제35권6호
    • /
    • pp.493-501
    • /
    • 2016
  • Objective: This study analyzes the effect of angle conditions of rehabilitation equipment used for supporting hemiplegic patients on their rehabilitation training for standing action. The study was performed by adjusting the rear angle of seat inclination through a motion analysis. Background: Owing to a loss of muscle rigidity and degradation of muscle control ability, hemiplegic stroke patients suffer from asymmetrical posture, abnormal body balance, and degraded balance abilities due to poor weight-shifting capacity. The ability to shift and maintain one's weight is extremely essential for mobility, which plays an important role in our daily life. Thus, to improve patients' ability to maintain weight evenly and move normally, they need to undergo orthostatic and ambulatory training. Method: Using a motion analysis system, knee movements on both hemiplegic side and non-hemiplegic side were measured and analyzed in five angles ($0^{\circ}$, $10^{\circ}$, $30^{\circ}$, $50^{\circ}$, $70^{\circ}$) while supported by the sit-to-stand rehabilitation equipment. Results: The knee movements on both sides increased as the angle increased in angle support interval to support a hemiplegic patient's standing up position. In standing up interval, a hemiplegic patient's knee movement deviations on both sides decreased, and the movement differences between hemiplegic and non-hemiplegic legs also decreased as the angle increased. Conclusion: The results of this study showed that the rehabilitation effectiveness increases as the angle increases, leading to a balanced standing posture through the decrease of movement difference between hemiplegic and non-hemiplegic sides and an improved standing up ability through the increase of knee movement on both sides. However, angles higher than $50^{\circ}$ didn't provide a significant effect. Therefore, a support angle under $50^{\circ}$ was proposed in this study. Application: The results of this study are expected to be applicable to the design of sit-to-stand support equipment to improve the effectiveness of the rehabilitation process of hemiplegic patients.

폴리머 시멘트 모르타르의 철근부착력 평가를 위한 인발실험과 모델링 (Bonding Properties of Steel-reinforced Polymer Cement Mortar Evaluated by Pull-off Test and FEM Modeling)

  • 박동천;노부토시 요네다;조봉석
    • 한국건축시공학회지
    • /
    • 제14권3호
    • /
    • pp.216-222
    • /
    • 2014
  • 단면수복 보수를 실시한 RC조 부재의 내하성능 회복을 예측 평가하기 위하여 FEM해석이 빈도 높게 사용되고 있으나 부착에 대한 정보가 부족하여 정확도 있는 예측이 힘든 실정이다. 수치해석의 입력데이터가 되는 철근과 폴리머 시멘트 모르타르의 부착특성을 평가하기 위하여 폴리머 시멘트 모르타르를 이용한 일련의 인발실험을 실시하였다. 동시에 범용성있는 해석결과 활용을 위하여 부착특성을 부착강성과 부착강도로 정의하고 비선형 FEM 감도 역해석을 실시하였다. 결과를 요약하면 보수재료의 화학적 부착보다 물리적 부착이 지배적이며 폴리머 분말수지의 함유에 의해 다소 부착계면의 성능이 저하하는 것을 알 수 있었다. 부착계면의 물성은 강성과 강도로 구분하여 모델화하는 것이 합리적인 것으로 사료된다.

국내 석탑의 강성, 고유진동수 및 감쇠비에 관한 연구 (Study on the Joint Stiffness, Natural Frequency and Damping Ratio of Stone Pagodas in Korea)

  • 이성민;최희수;이기학;이찬희;조영훈
    • 한국공간구조학회논문집
    • /
    • 제18권1호
    • /
    • pp.45-53
    • /
    • 2018
  • Following the earthquake that shook the city of Gyeongju, Korea, in 2016, it became apparent that research on the safety of cultural heritages against the seismic hazards is necessary in Korea. Predictions of how historically significant stone pagodas would behave the earthquakes anticipated in near future, which are the subject of this study, is also required. In this study, the dynamic characteristics of 15 cultural heritage designated stone pagodas of Korea were investigated, including natural frequency and damping ratio, and the stiffness of the stone material and its contact area were determined using eigenvalue analysis by assuming the stone pagodas to be multi-degree-of-freedom structures. The results of this study enable the structural modeling of stone pagodas using a finite element analysis program and the method is expected to be useful in assessing the structural safety of stone pagodas against vertical loads as well as lateral forces, including earthquakes. Also, by identifying the dynamic characteristics of the structures, the results of this study can be utilized as a nondestructive testing method to determine the rigidity of cultural heritage structures and to identify inherent problems. The natural frequencies of the Korean stone pagodas were measured to be within 3.5~8.3Hz, excluding cases with distinct natural frequency results, and it was determined that the natural frequencies of the stone pagodas are influenced by various parameters including the height and joint stiffness of the structures.

저층 경량건물의 고성능 내진을 위한 복합면진시스템의 적용 (Application of Hybrid Seismic Isolation System to Realize High Seismic Performance for Low-rise Lightweight Buildings)

  • 천영수
    • 토지주택연구
    • /
    • 제4권2호
    • /
    • pp.185-192
    • /
    • 2013
  • 이 논문에서는 저층 경량건물을 대상으로 고성능 내진을 구현하기 위하여 적용된 복합면진시스템의 적용효과가 비선형해석과 현장실험을 통하여 제시되었다. 이 연구에서 적용된 복합면진시스템은 슬라이딩베어링(sliding bearing)과 적층고무베어링(laminated rubber bearing)을 혼용하는 방법으로 전체 면진시스템의 고유주기를 신장시키는데 있어서 적층고무베어링이 지니는 한계를 극복하기 위한 것이다. 비선형해석결과, 복합면진시스템을 채용하여 설계된 면진건물은 아주 드물게 발생하는 강진에 대해서도 최대응답변위가 허용설계변위 이내이며, 최대응답전단력이 설계지진력 이하이므로 안전하게 유지될 수 있음을 알 수 있었다. 또한 현장실험결과, 면진층의 강성은 설계 등가강성 값의 약 95.8%에 해당하는 값을 나타내 전체 면진시스템의 실제 특성이 설계값과 잘 일치하고 있음을 확인할 수 있었다.

부분구조법에 의한 지반-구조물상호작용시스템의 지진응답 매개변수 연구 (Parametric Study on Earthquake Responses of Soil-structure Interaction System by Substructure Method)

  • 박형기;조양희
    • 한국지진공학회논문집
    • /
    • 제2권1호
    • /
    • pp.1-10
    • /
    • 1998
  • 동적 지반-구조물해석과정에는 수많은 불확실성 요소가 내재되어 있다. 이러한 요소는 입력운동의 정의, 지반-구조물시스템의 모델작성, 해석기법 등에 포함된다. 이 논문은 점탄성 층상지반상의 원자로건물의 지진응답에 대한 매개변수해석을 수행한 결과를 제시한 것이다. 많은 매개변수 중에 입력운동의 정의위치, 구조물의 묻힘정도, 상부토층의 두께와 지반의 강성을 선택하여 지진응답에 미치는 영향을 중점적으로 이 연구에서 다루었다. 해석방법은 진동수에 무관한 지반임피던스를 사용하는 부분구조법인 시간영역에서의 모드중첩법이다. 지반-구조물시스템의 모드감쇠값은 각 모드에 대해 변형에너지에 대한 소멸에너지의 비를 구하여 결정되었다. 이 연구결과로부터 부분구조법에 의한 지반-구조물상호작용해석법의 실용적 이용에 참고할 수 있는 지진응답에 미치는 각 파라메터의 민감도가 제시되었다.

  • PDF

탄소복합재 부품 파티션패널의 구조 강성/강도 신뢰성 평가에 관한 연구 (Study on Structural Reliability Assessment of a Partition Panel Made of a CFRP(Carbon Fiber Reinforced Plastic))

  • 이재진;문지훈;윤원호;강다경;안민수;노형진;강지헌;이재욱
    • 한국기계가공학회지
    • /
    • 제18권10호
    • /
    • pp.68-74
    • /
    • 2019
  • In the case of a partition panel for a vehicle, it is used as a vehicle chassis component that serves to distinguish the indoor and outdoor spaces of a vehicle and is mounted on a backrest portion of the vehicle's back seat to ensure the convenience of passengers by connecting the floor and the side of the vehicle. Because it is a relatively large-sized plate material among automobile chassis parts except the moving parts and non-ferrous materials can be applied, it is considered as a part having a large light-weight effect. However, the partition panel is one of the vehicle parts that must satisfy the light-weight effect as well as various structural reliability, such as torsional rigidity, vibration, and impact characteristics, for securing the running stability of the vehicle when driving at the same time. So, In this study, the possibility of replacing the aluminum partition panel as CFRP(Carbon Fiber Reinforced Plastic) partition panel is evaluated through comparing the two partition panels by using the structural reliability(stiffness/strength analysis), vibration analysis, impact analysis.

경차와 대형차에서의 스테빌라이저들의 구조해석에 관한 융합연구 (A Convergent Study on the Structural Analysis of Stabilizer at Light and Large Sized Cars)

  • 최계광;조재웅
    • 한국융합학회논문지
    • /
    • 제12권2호
    • /
    • pp.173-177
    • /
    • 2021
  • 본 연구에서는 경차와 대형차의 중공축을 가진 스테빌라이저 모델들의 비틀림 강성과 내구성을 해석하여 서로 비교 및 검토하였다. Model 1이 가해진 모우멘트가 Model 2에 비하여 3배 이상이었지만 최대변형량은 2.6배 정도로 크게 나타났다. Model 1, Model 2 공히, 스테빌라이저 바 링크 목 부분에서 가장 많은 응력을 받는 것으로 보인다. 또한 Model 1의 최대응력은 Model 2보다 2.9배 정도로 크게 나타났다. 대형차에서의 Model 1이 소형차에서의 Model 2 보다 약 20배 이상의 변형 에너지를 보였다. 전반적으로 스테빌라이저의 변형 에너지보다 스테빌라이저 바를 고정해주는 모멘트를 가한 쪽의 브라켓 부분의 값이 큰 것을 확인할 수 있었다. 그리고 본 연구에서의 해석 결과들은 경차나 대형차에서의 스테빌라이저의 내구성이 있는 부품으로서 그 융합연구 설계에 도움이 될 수 있다고 사료된다.

말합연약식반의 변형위석에 관한 수치해석 (Numerical Analysis on Deformation of Soft Clays Reinforced with Rigid Materials)

  • 강병선;박병기;정진섭
    • 한국지반공학회지:지반
    • /
    • 제1권2호
    • /
    • pp.27-40
    • /
    • 1985
  • 본고는 기약지반변형해석에 이용될 범용 program을 개발하고 이를 이용하여 성토부끝에 sheet pile을 타설하거나 혹은 성토부아래의 연약정토지반을 개취하였을 때의 변형억제효과를 연구한 것이다. 본고에 적용된 압밀리론으로서 Biot의 압밀방정식과 구성방정식으로서 탄소성리론에 근거한 modified Cam-clay 이론을 적용하였고 유한요소해석으로서는 Christian-Boehmer계를 도입하여 program화한 것이다. 그 주요한 결론은 다음과 같다. 1. 속변지반의 침하효과에 관해서는 sheet pile이나 심우혼합처새깊이를 자지층까지 관입하여 시공하고 그 자신의 침하가 없을 경우에만 유효하다. 2. 흔히 사용되는 sheet pile대책공법은 통상의 steel sheet pile의 각성으로서는 성토직후의 봉기, 측방변위의 억제효과는 기대할 수 없다. 3. Sheet pile에 대한 예상론인 사용방법은 성토하부에 세밀을 촉진하기 위해 vertical drain을 설치하고 점증재하 방법만이 확실한 효과가 있다. 4. 체층혼합처리공법은 예상한 바와 같이 그 자종가 강성이 클수록 침하억제핵과가 있다. 특히 grouting을 통한 지반강화가 곧장 주변지반의 변형억제효과가 있다고 단정하는 것은 그 강성 까 관련하여 신중히 고려하여 결정해야 한다.

  • PDF