Browse > Article
http://dx.doi.org/10.14775/ksmpe.2019.18.10.068

Study on Structural Reliability Assessment of a Partition Panel Made of a CFRP(Carbon Fiber Reinforced Plastic)  

Lee, Jaejin (GyeongBuk Hybrid Technology Institute)
Mun, Jihun (GyeongBuk Hybrid Technology Institute)
Yoon, Wonho (GyeongBuk Hybrid Technology Institute)
Kang, Dakyung (GyeongBuk Hybrid Technology Institute)
Ahn, Minsu (Shinyoung)
Roh, Hyungjin (Samyang Corp.)
Kang, Jiheon (Korea Institute of Industrial Technology)
Lee, Jaewook (Korea Institute of Industrial Technology)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.18, no.10, 2019 , pp. 68-74 More about this Journal
Abstract
In the case of a partition panel for a vehicle, it is used as a vehicle chassis component that serves to distinguish the indoor and outdoor spaces of a vehicle and is mounted on a backrest portion of the vehicle's back seat to ensure the convenience of passengers by connecting the floor and the side of the vehicle. Because it is a relatively large-sized plate material among automobile chassis parts except the moving parts and non-ferrous materials can be applied, it is considered as a part having a large light-weight effect. However, the partition panel is one of the vehicle parts that must satisfy the light-weight effect as well as various structural reliability, such as torsional rigidity, vibration, and impact characteristics, for securing the running stability of the vehicle when driving at the same time. So, In this study, the possibility of replacing the aluminum partition panel as CFRP(Carbon Fiber Reinforced Plastic) partition panel is evaluated through comparing the two partition panels by using the structural reliability(stiffness/strength analysis), vibration analysis, impact analysis.
Keywords
Al Partition Panel; CFRP Partition Panel; Structural Reliability Assessment; Light-weight Effect;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Wu, C., Gao, Y., Fang, J., Lund, E., & Li, Q., "Discrete topology optimization of ply orientation for a carbon fiber reinforced plastic (CFRP) laminate vehicle door", Materials & Design, Vol. 128, pp. 9-19, 2017.   DOI
2 Suzuki, T., Takahashi, J., "LCA of Lightweight Vehicles by using CFRP for Mass-Produced Vehicles (03DD)", International conference on composite materials, ICCM-15, pp. 133-134, 2005.
3 Wang, G. D., Melly, S. K., "Three-dimensional finite element modeling of drilling CFRP composites using Abaqus/CAE: a review", International journal of advanced manufacturing technology, Vol. 94, No.1, pp. 599-614, 2018.   DOI
4 Kim, J. H., Bang, J. M., Kim, J. H., "The Study of Simulation Dynamic Behavior of CFRP Structural Members ", Journal of Mechanical Science and Technology, Vol. 35, No. 5, pp. 561-565, 2011.
5 Na, H. J., Chun, J. S., Cho, K., S., "Development of CFRP Tubes for the Light-Weight Propeller Shaft of 4WD SUV Vehicles", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 4, pp. 32-38, 2018.   DOI
6 Cho, G. J., Lee, S. C., Jeong, S. T., "Evaluation on the Static Test of CFRP Composites with Respect to Stacking Sequence", Journal of the Korean Society of Manufacturing Process Engineers, pp. 284-289, 2007.
7 Lee, M. S., Kang, C. G., "Determination of forming procedure by numerical analysis and investigation of mechanical properties of steel/CFRP hybrid composites with complicated shapes", Composite structures, Vol. 164, pp. 118-129, 2017.   DOI
8 Yeo, I. G., Choi, J. H., Yang, I. Y., "Dynamic Characteristics of CFRP Structure Member According to Change the Stacking Angle and Shape", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 22, No. 3, pp. 388-393, 2013.   DOI
9 Shin, Y. J., Jeung, H. K., Park, S. W., Park, D. W., Park, Y., Jung, J. W., "Fabrication and Characterization of Carbon Long-Fiber Thermoplastic Composites using the LFT-D System", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 25-30, 2017.   DOI