• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2014

This study investigates structural and vibration analyses for three types of bike frame fork models. As long as the maximum equivalent stresses of these models are lower than the yield stress, the three models are considered to be safe structurally. Type 3, with a maximum equivalent stress of 169.23 MPa, has the lowest stress among the three models and the strongest strength. Types 1, 2 and 3 have natural frequencies lower than 270 Hz. Type 3, with a critical frequency of 118 Hz, has the best durability under vibration among the three models. In order to decrease the vibration transmitted to a bike rider riding on a rough road, the impact due to vibration can be relieved by selecting a Type 3 model from among the three models. The results of this study can be effectively utilized for the design of a bike frame fork as this allows the anticipation and prevention of damage caused by durability issues.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.551-554
• /
• 1999

In this paper, we developed a radial pulse transducer that has strain-gauge cantilever type load cell for total pulse detection on chongu arterial. The transducer consist of load cell and driving electronic circuits. Load cell consist of cantilever and two metal film strain gauge. The Pressure signal from chongu artery is delivered to load cell using artery rider that attached to cantilever Therefore the pressure signal convert to voltage signals by the developed transducer As the results of experiment, the developed transducer has very good linearity at pressure to voltage conversion. The total pulse detection transducer can detected three kinds of chongu artery pulse with conveniently.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.292-304
• /
• 2005

In this paper we present the linearized equations of motion for a bicycle as a benchmark. The results obtained by pencil-and-paper and two programs are compared. The bicycle model we consider here consists of four rigid bodies, viz. a rear frame, a front frame being the front fork and handlebar assembly, a rear wheel and a front wheel, which are connected by revolute joints. The contact between the knife-edge wheels and the flat level surface is modelled by holonomic constraints in the normal direction and by non-holonomic constraints in the longitudinal and lateral direction. The rider is rigidly attached to the rear frame with hands free from the handlebar. This system has three degrees of freedom, the roll, the steer, and the forward speed. For the benchmark we consider the linearized equations for small perturbations of the upright steady forward motion. The entries of the matrices of these equations form the basis for comparison. Three diffrent kinds of methods to obtain the results are compared : pencil-and-paper, the numeric multibody dynamics program SPACAR, and the symbolic software system Auto Sim. Because the results of the three methods are the same within the machine round-off error, we assume that the results are correct and can be used as a bicycle dynamics benchmark.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.4
• /
• pp.375-384
• /
• 2015

Recently, there has been a gradual increase in the number of people who are interested in cycling, leading to an increasing number of cycling equipment consumers. However, many bicyclists get hurt because of their lack of knowledge about the right size of bicycle for their body. Although it is necessary for a rider to fit their bicycle to prevent injury, they reject a fitting service because of the long hours and high cost. In this study, we propose a bicycle fitting system that uses a depth camera to improve the limitations of existing manual fitting systems. With the defined formula, the system calculates the size of the bicycle using body image information extracted by a depth camera and visualizes a customized bicycle for a specific consumer. This system will not only save the customer time and money, but will prevent injury from the use of a bicycle that does not fit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.837-846
• /
• 2005

The purpose of this study is to suggest a standard of guidance for testing the performance and safety of motorcycle jacket with built-in airbag. The method of testing were as follows: The effects of the motorcycle jacket with built-in airbag are experimentaly investigated according to neck injury of FMVSS 208. The experiment consists of the crash simulation test by shield and the impact test. The head and neck injuries are evaluated based on industrial standards. Also, the displacements of the head and neck and chest are observed by film analysis. Using the results of the crash simulation test, neck injury$(N_ij)$ is discussed and the peak chest deflection of the results of the impact test, chest injury is pursued. Neck injury$(N_ij)$ of the result of the crash test show that the chance of a serious wound is $18\%$ if rider wear the R&D motorcycle jacket with built-in airbag(Type A). Chest injury is expected by peak chest deflection of the result of the impact test. The result of the peak chest deflection show that the reduction effect in chest injury of Type A motorcycle jacket is $10.3\%$.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.209-216
• /
• 2010

We need a study of the ratio of successful applicants control methodology about the national technical qualification under the global-green industrial society and rapid change of international circumstances, infinite competition rider society under FTA aspects. It is necessary to develop of HRD Korea selfishness and increase brand value of national technical qualification. So, this study is analysed to the ratio of successful applicants of national technical qualification toward change of the 'bank of problems' control rule, various characters of candidates and the trend of demand and supply of labours instead of the absolute evaluation method. Accordingly, this study suggests to a methodology for the forecasting model of the ratio of successful applicants using the level of problems difficulty and pattern and the candidates academical carriers.

• Advances in aircraft and spacecraft science
• /
• v.7 no.3
• /
• pp.271-290
• /
• 2020

The paper describes the analysis of deployment strategies and trajectories design suitable for executing the inspection of an operative spacecraft in orbit through re-usable CubeSats. Similar missions have been though indeed, and one mission recently flew from the International Space Station. However, it is important to underline that the inspection of an operative spacecraft in orbit features some peculiar characteristics which have not been demonstrated by any mission flown to date. The most critical aspects of the CubeSat inspection mission stem from safety issues and technology availability in the following areas: trajectory design and motion control of the inspector relative to the target, communications architecture, deployment and retrieval of the inspector, and observation needs. The objectives of the present study are 1) the identification of requirements applicable to the deployment of a nanosatellite from the mother-craft, which is also the subject of the inspection, and 2) the identification of solutions for the trajectories to be flown along the mission phases. The mission for the in-situ observation of Space Rider is proposed as reference case, but the conclusions are applicable to other targets such as the ISS, and they might also be useful for missions targeted at debris inspection.

• Journal of Fashion Business
• /
• v.22 no.5
• /
• pp.125-136
• /
• 2018

This study intended to develop a motorcycle safe vest that can be prepared against accidents by mounting a smart module (with built-in sensor) on the safe vest in order to emphasize safety among functional aspects of the motorcycle clothing. The research method investigated professional books, prior research, and Internet data to examine the characteristics of motorcycle wear and the theoretical examination of smart wear, and analyzed the functional characteristics of the design by reviewing smart jacket and vest design cases for motorcycles currently on the market. As a results of study an interface device sensor, which contains a sensor with IMU(Intertial Measurement Unit) and CPU(Central Processing Unit), was inserted into a motorcycle top in order to draw attention to the safety of motorcycle riders. The IMU sensor attached to the vest detected the tilting motion of the rider to either left or right side to obtain data on left or right direction, sudden stop, and so forth and displayed left or right turn signal and sudden stop sign on the backplate (back) through the LED module. As for charging the device to operate LEDs, a generator, which is designed to convert the heat energy in the exhaust into electric energy, was used to efficiently self-produce the power required to operate LEDs of the top while riding.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.98-101
• /
• 2022

Before the delivery platform was established, when consumers ordered by phone to the store, a rider hired by the store directly delivered it or delivered it through a delivery agency. However, as the food service culture develops, delivery platforms grow and more people seek convenience, making it difficult to see orders without delivery platforms now. When ordering using the delivery platform in this way, there is a shortage of riders and a negative effect of increasing delivery costs for supply. Therefore, we propose a joint delivery chat app to solve the problems of the current delivery system and reduce delivery costs.

• Safety and Health at Work
• /
• v.14 no.2
• /
• pp.207-214
• /
• 2023

Background: Occupational safety issues related to food delivery riders emerge with evidence of an increase in associated traffic accidents and injuries along with the rapid growth of the online food delivery business. This paper focuses on food delivery riders' job stress and investigates its relationships with both antecedents and risky riding outcomes. Method: Survey data were collected from 279 Taiwanese food delivery motorcycle riders and analyzed using hierarchical regression analysis. Results: The results show that job overload and time pressure positively impact riders' job stress, while self-efficacy slightly reduces job stress. Job stress positively leads to risky driving behavior and distraction. In addition, time pressure can strengthen the impact of job overload on job stress. Riders' risky riding attitude can also strengthen the impacts of job stress on risky riding behaviors and distraction. Conclusion: This paper advances the literature on online food delivery as well as the occupational safety improvement of food delivery riders. Specifically, this study provides insights into the job stress of food delivery motorcycle riders and the effects of job characteristics and risky behavioral consequences.