• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.805-810
• /
• 2005

The main functions of suspension system of railway vehicle are isolating vibration from track irregularity to car-body for the Ride quality and keeping its stability with limitation of vehicle's movement. These two functions conflict with each other, then it is impossible to achieve both of performance with traditional passive suspension which has constant characteristics. So, to improve this situation the active suspension was suggested and in specially the semi-active suspension is noticed for its effectiveness on cost despite of its lower performance than full-active suspension. In this study the control logic made through LQG theory was designed with simplified vehicle model and variable damper model defined by $1^{st}$ order system, then the analysis of simulation results was done to understand influence on the performance of semi-active suspension with running conditions and response characteristics of variable damper.

• International Journal of Railway
• /
• v.6 no.3
• /
• pp.107-111
• /
• 2013

In order to constrain the railway roadbed settlement which causes track irregularity, and thus threats running stability and ride quality, advanced Back-to-Back (BTB) reinforced retaining wall was numerically analyzed as railway roadbed structure. This study is intended to improve conventional Back-to-Back reinforced retaining wall as the technology which would reduce the roadbed settlement in a way of constraining the lateral displacement of its prestressed vertical facing and inducing arching effects in roadbed (backfill) placed between masonry diaphragm wall and vertical facing. As a result of numerical analysis, it was found that the roadbed settlement was reduced by 10% due to the prestressed vertical facing and embedded masonry diaphragm wall of the advanced Back-to-Back reinforced retaining wall system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1282-1288
• /
• 2006

Upon demands for the requests of rapid, safe and comfort transit, the proven high speed bogie having not only high-quality but also good running performance is required by customer all over the railway vehicle for narrow gauge. Hereupon, the running test on roller testing rig for developed semi-high speed bogie for narrow gauge was carried out in order to verify the running performance and safety. The aim of the test is to assess the dynamic behaviour of the bogie on straight track including the running stability, ride quality, modal frequency and dynamic response.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.31-39
• /
• 1998

The role of bushing elements linked between suspension parts is to enhance ride quality and handling stability by the spring and damping effect from the elastic deformation. In this paper, a theoretical derivation and computer implementation off a bushing element are proposed. Three different vehicle models are generated to test the developed bushing module. The developed bushing module is implemented as a bushing module in the vehicle dynamic analysis program AUTODYN7.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.127-134
• /
• 2014

Active body control system is an important system for determining the driving stability and ride comfort of the vehicle. Active body control system is composed of a cylinder unit power supply unit, and control valve unit. Control valve is a proportional pressure control valve, the dynamic characteristics of the valve affects the performance of the active body control system. We have developed an analytical model, we analyzed the design parameters of the proportional pressure control valve. Further, by knowing the design parameters effect on the system and to optimize the design parameters, and improved performance of the dynamic properties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.683-692
• /
• 2002

The most important parameter for hydraulic active suspension system is to sustain desirable vehicle maneuvering stability and ride comfort without increasing power consumption. The performance of hydraulic active suspension system depends on damping force of body damping valve and piston damping valve. Hydraulic actuator design and damping valve parameter selection are essential and basic procedure to design hydraulic system. This paper is on computer simulation with use of mathematical model that was delivered from dynamic characteristic of hydraulic actuator, as know basic damping characteristics of hydraulic active suspension system. The aim of this paper is to select the system parameter that affect mainly hydraulic active suspension, and identify the validity on the system parameter selection.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.10-16
• /
• 2008

In order to improve stability of rail and ride comfort, railway bridges should be maintained a integrity. However, it is necessary to plan various reinforcements and improvements because of a long term used and external effects. In this paper, the improvement plan which is reflected by investigation for reinforcement and improvement is introduced. The constituents of the structures are defined in order to optimize the improvement plane, and the analysis for relationships between the constituents are performed by several evaluation. Finally, the improvement plan is applied to a structure using impact factors for the external effects in order to obtain the improvements reasonably.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.16-23
• /
• 2020

Vehicle seats provide a comfortable ride for passengers by properly absorbing vibrations and shocks transmitted during driving. Vibration analyses on three models with different shapes were carried with the same material properties and constraint conditions. By varying the height of the seat-back, models 1, 2, and 3 were designed according to the inclined angle of the seat-back frame. Models 1, 2, and 3 were modeled with relatively simple designs using CATIA. The areas touching the buttocks of passengers show the most deformation. This work shows that seat durability and stability can vary depending on the shape of the seat design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.38-45
• /
• 2020

A magnetically levitating capsule train, which runs inside the sub-vacuum tube, can reach ultra-fast speeds by dramatically reducing the aerodynamic drag and friction. The capsule train uses the superconductor electrodynamic suspension (SC-EDS) method for levitation. The SC-EDS method has advantages, such as a large levitation gap and free of gap control, which could reduce the infra-construction cost. On the other hand, disadvantages, such as the large variation of the levitation-guidance gap and small damping characteristics in levitation-guidance force, could degrade the running stability and ride comfort of the capsule train. In this study, a dynamic analytical model of a capsule train based on the SC-EDS was developed to analyze the running dynamic characteristics. First, as important factors in the capsule train dynamics, the levitation and guidance stiffness in the SC-EDS system were derived, which depend non-linearly on the velocity and gap variation. A 3D dynamic analysis model for capsule trains was developed based on the derived stiffness. Through the developed model, the effects of the different running speeds on the ride comfort were analyzed. The effects of a disturbance from infrastructure, such as the curve radius, tube sag, and connection joint difference, on the running stability of the capsule train, were also analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1128-1133
• /
• 2011

In a wind farm, a large number of small wind turbine generators (WTGs) operate whilst a small number of a large generator do in a conventional power plant. To maintain high quality and reliability of electrical energy, a wind farm should have equal performance to a thermal power plant in the transient state as well as in the steady state. The wind farm shows similar performance to the conventional power plant in the steady state due to the advanced control technologies. However, it shows quite different characteristics during fault conditions in a grid, which gives significant effects on the operation of a wind farm and the power system stability. This paper presents an analysis of response of a wind farm during grid fault conditions. During fault conditions, each WTG might produce different frequency components in the voltage. The different frequency components result in the non-fundamental frequencies in the voltage and the current of a wind farm, which is called by "beats". This phenomenon requires considerable changes of control technologies of a WTG to improve the characteristics in the transient state such as a fault ride-through requirement of a wind farm. Moreover, it may cause difficulties in protection relays of a wind farm. This paper analyzes the response of a wind farm for various fault conditions using a PSCAD/EMTDC simulator.