• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.162-167
• /
• 2024

Fossil fuels have been main energy source to people. However, enormous amount of CO₂ was emitted over the world , resulting in global climate crisis today. Recently, solid oxide electrolyzer cell (SOEC) is getting attention as an effective way for producing H₂, a clean energy resource for the future. Also, SOEC could be applicable to reverse water-gas shift reaction process due to its high-temperature operating condition. Here, SOEC system was utilized for both H₂ production and CO₂ reduction process, allowing product gas composition change by controlling operating conditions.

• 청정기술
• /
• 제6권2호
• /
• pp.129-137
• /
• 2000

역수성가스반응과 메탄올형성반응을 연계한 메탄올합성공정에 대한 엑서지 해석을 수행하였다. 실험자료를 이용하여 공정을 모사하였으며 공정모사의 결과를 이용하여 엑서지 해석을 수행했다. 구동엑서지 손실과 물질엑서지 손실을 각각 정의하였고 정량화 하였다. 해석결과를 바탕으로 엑서지 손실의 위치, 크기, 원인과 개선 가능방법 등을 제시하였다. 엑서지 해석은 오염방지를 위한 손실예방책을 발전시키고 나아가 산업생태학에 적용할 수 있는 타당한 과학적 근거가 될 수 있음을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.86-90
• /
• 2003

Reverse-Water-Gas-Shift reaction (RWGSR) was carried out over the ZnO, $Al_2O_3,\;and\;ZnO/Al_2O_3$ catalysts at the temperature range from 400 to 700 ℃. The ZnO showed good specific reaction activity but this catalyst was deactivated. All the catalysts except the $ZnO/Al_2O_3$ catalyst (850 ℃) showed low stability for the RWGSR and was deactivated at the reaction temperature of 600 ℃. The $ZnO/Al_2O_3$ catalyst calcined at 850 ℃ was stable during 210 hrs under the reaction conditions of 600 ℃ and 150,000 GHSV, showing CO selectivity of 100% even at the pressure of 5 atm. The high stability of the $ZnO/Al_2O_3$ catalyst (850 ℃) was attributed to the prevention of ZnO reduction by the formation of $ZnAl_2O_4$ spinel structure. The spinel structure of $ZnAl_2O_4$ phase in the $ZnO/Al_2O_3$ catalyst calcined at 850 ℃ was confirmed by XRD and electron diffraction.

• 공업화학
• /
• 제28권3호
• /
• pp.339-344
• /
• 2017

다양한 조촉매가 첨가된 $Pt/TiO_2$ 촉매 및 순수 Pt계 촉매의 RWGS 반응에 대한 특성과 성능에 관한 연구를 수행하였다. 지지체 및 활성금속 종류에 의해 RWGS 반응 성능이 크게 영향 받음을 확인하였고, $Pt/TiO_2$ 촉매가 가장 우수한 성능을 보임을 알 수 있었다. $CO_2$ 주입 농도별 실험 및 열역학적 평형 전환율 평가를 통해 $Pt/TiO_2$ 촉매의 성능을 객관적으로 평가할 수 있었고, 상용촉매 대비 우수한 성능을 보임을 관찰하였다. 조촉매로 첨가한 Ca와 Na는 촉매성능을 증진시킬 수 있었으며, XPS 분석을 통해 표면 활성점의 전자밀도가 성능과 밀접한 관련이 있음을 확인하였다.

• 청정기술
• /
• 제29권4호
• /
• pp.327-332
• /
• 2023

본 연구에서는 바이오가스 수증기 개질을 통한 합성가스 생산에 관해 연구했다. Ni-Al₂O₃ 및 Ni-CeO₂ 촉매는 공침법으로 제조되었으며 침전제 주입 속도가 조절되었다. 온도에 따른 촉매 성능 테스트는 CH₄:CO₂:H₂O = 1:0.67:3의 가스 조성비와 647,000 mL h^-1 gcat^-1의 공간속도에서 진행하였다. 침전제 주입 속도는 촉매 특성에 영향을 미쳤으며, 지지체 종류에 따라 결과를 보였다. 온도가 증가함에 따라 이산화탄소 개질 반응과 reverse water gas shift 반응이 일어났다. 수증기가 충분히 공급되는 조건에서는 침전제를 한 번에 투입하여 제조된 Ni-Al₂O₃ 촉매가 높은 Ni 분산도에 기인하여 가장 우수한 성능을 보였다.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.50-54
• /
• 2018

This study investigated the long-term durability of catalyst(Pd or Fe)-infiltrated solid oxide cells for $CO_2$/steam co-electrolysis. Fuel-electrode supported solid oxide cells with dimensions of $5{\times}5cm^2$ were fabricated, and palladium or iron was subsequently introduced via wet infiltration (as a form of PdO or FeO solution). The metallic catalysts were employed in the fuel-electrode to promote $CO_2$ reduction via reverse water gas shift reactions. The metal-precursor particles were well-dispersed on the fuel-electrode substrate, which formed a bimetallic alloy with Ni embedded on the substrate during high-temperature reduction processes. These planar cells were tested using a mixture of $H_2O$ and $CO_2$ to measure the electrochemical and gas-production stabilities during 350 h of co-electrolysis operations. The results confirmed that compared to the Fe-infiltrated cell, the Pd-infiltrated cell had higher stabilities for both electrochemical reactions and gas-production given its resistance to carbon deposition.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.140-145
• /
• 2024

High temperature co-electrolysis of H₂O-CO₂ mixtures using solid oxide cells has attracted attention as promising CO₂ utilization technology for production of syngas (H₂/CO), feedstock for E-fuel synthesis. For direct supply to E-fuel production such as hydrocarbon and methanol, the outlet gas ratio (H₂/CO/CO₂) of co-electrolysis should be controlled. In this work, current voltage characteristic test and product gas analysis were carried out under various reaction conditions which could attain proper syngas ratio.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.214-223
• /
• 2002

Kinetic and effectiveness factors for methanol steam reforming using commercial copper-containing catalysts in a plug flow reactor were investigated over the temperature ranges of $180-250^{\circ}C$ at atmospheric pressure. The selectivity of $CO_2$/$H_2$ was almost 100%, and CO products were not observed under reaction conditions employed in this work. It was indicated that $CO_2$ was directly produced and CO was formed via the reverse water gas shift reaction after methanol steam reforming. The intrinsic kinetics for such reactions were well described by the Langmuir-Hinshelwood model based on the dual-site mechanism. The six parameters in this model, including the activation energy of 103kJ/mol, were estimated from diffusion-free data. The significant effect of internal diffusion was observed for temperature higher than $230^{\circ}C$ or particle sizes larger than 0.36mm. In the diflusion-limited case, this model combined with internal effectiveness factors was also found to be good agreement with experimental data.

• 한국대기환경학회지
• /
• 제29권1호
• /
• pp.97-104
• /
• 2013

Methyl alcohol is one of the basic intermediates in the chemical industry and is also being used as a fuel additive and as a clean burning fuel. In this study, conversion of carbon dioxide to methyl alcohol was investigated using catalytic chemical methods. Ceramic monoliths (M) with $400cell/in^2$ were used as catalyst supports. Monolith-supported CuO-ZnO catalysts were prepared by wash-coat method. The prepared catalysts were characterized by using ICP analysis, TEM images and XRD patterns. The catalytic activity for carbon dioxide hydrogenation to methyl alcohol was investigated using a flow-type reactor under various reaction temperature, pressure and contact time. In the preparation of monolith-supported CuO-ZnO catalysts by wash-coat method, proper concentration of precursors solution was 25.7% (w/v). The mixed crystal of CuO and ZnO was well supported on monolith. And it was known that more CuO component may be supported than ZnO component. Conversion of carbon dioxide was increased with increasing reaction temperature, but methyl alcohol selectivity was decreased. Optimum reaction temperature was about $250^{\circ}C$ under 20 atm because of the reverse water gas shift reaction. Maximum yield of methyl alcohol over CuO-ZnO/M catalyst was 5.1 mol% at $250^{\circ}C$ and 20 atm.