• 열처리공학회지
• /
• 제10권2호
• /
• pp.93-100
• /
• 1997

Effect of austenite grain size on starting temperature of ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation($M_s$) has been studied in an Fe-18%Mn alloy. Particular attention was paid on the variation of stacking fault energy with austenite grain size, which is considered to be a important factor affecting ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation. Austenite grain size was increased in a wide range from $13{\mu}m$ to $185{\mu}m$ with increasing solution treatment temperature from $700^{\circ}C$ to $1100^{\circ}C$. Hardness was decreased with increasing austenite grain size while the volume fraction of ${\varepsilon}$ martensite showed a reverse tendency, which indicates that the hardness is more dependent on austenite grain size than ${\varepsilon}$ martensite content. No significant change was found in $M_s$ temperature when the grain size was larger than about $30{\mu}m$. In case that, the austenite grain size was smaller than about $30{\mu}m$, however, $M_s$ temperature was marlkedly decreased with decreasing austenite grain size. A linear relationship between $M_s$ temperature and the stacking fault formation probability, i.e. the reciprocal of the stacking fault energy was obtained, which suggests that the variation of $M_s$ temperature with austenite grain size is closely related to the change in stacking fault energy.

• 한국컴퓨터정보학회논문지
• /
• 제16권6호
• /
• pp.41-50
• /
• 2011

악의적인 소프트웨어 역공학으로부터 프로그램이 가지는 코드를 보호하기 위해서 코드 난독화가 제안되었다. 이것은 기존에 존재하는 프로그램 코드를 어렵게 변환시키는 것으로 프로그램 코드에 대한 악의적인 정적 분석을 어렵게 만든다. 코드 난독화는 난독화 목적에 따라 레이아웃, 데이터, 제어 난독화로 분류되어진다. 이 중 제어 난독화는 프로그램이 가지는 제어 흐름에 대한 추상적인 정보를 보호하는 것으로 다양한 종류의 개별 제어 흐름 난독화 변환이 제안되었지만, 이를 효과적으로 적용할 수 있는 방법은 제안되지 않았다. 본 논문에서는 제어 흐름 난독화 변환을 프로그램에 효과적으로 적용할 수 있는 난독화 전략을 제안하고, 실험을 통해서 제안한 난독화 전략의 효용을 보였다.

• 융합신호처리학회논문지
• /
• 제9권4호
• /
• pp.304-312
• /
• 2008

Walsh 코드나 Golay 코드와 같은 직교 코드는 동기가 맞지 않은 경우 상호상관 값이 커질 수 있으므로 CDMA 시스템의 역방향 링크와 같이 사용자간 동기가 맞지 않는 경우 직교성이 손상되어 사용자간 간섭이 발생하기 때문에 사용자 구별용으로 거의 사용되지 않는다. Wysocki는 기존의 Walsh-Hadamard 행렬에 직교변환 행렬을 곱함으로써 생성된 코드들이 직교성을 유지하면서 코드간 상호상관 값이 커지지 않도록 할 수 있음을 보였다. Soberly와 Wysocki는 Golay 코드에 대해서 유사한 상호상관 함수의 제어방식을 제안하였다. 이것은 적절한 직교변환을 사용하면 Walsh 코드나 Golay 코드의 상호상관 값을 감소시킬 수 있고, 따라서 CDMA 역방향 링크에서 사용자 구별용으로 사용될 수 있음을 의미한다. 본 논문에서는 비동기 CDMA 링크의 성능에 영향을 주는 코드간의 상호상관 관련 파라미터들을 알아보고, 직교변환에 의해 이들 파라미터들이 어떻게 변화되는지 분석하였다. Walsh 코드와 Golay 코드에 대한 직교변환 행렬을 설계함에 있어 수정된 Walsh 또는 Golay 코드의 직교성을 유지하면서 결과 코드의 비주기 상호상관 피크치의 최대값($ACC_{max}$) 또는 비주기 상호상관의 제곱평균($R_{cc}$)을 최소화하도록 하였다. 직교변환에 의해 생성된 코드집합을 사용한 CDMA 시스템에 대하여 사용자간 동기가 맞지 않은 경우에 대해 비트오율 성능을 시뮬레이션을 통해 분석하여 성능을 개선시킬 수 있음을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.378-381
• /
• 2008

The buckling behavior of cylindrical shape-memory alloy and aluminum tube is investigated at room temperature using a split Hopkinson pressure bar and an Instron hydraulic machine with a specially designed recording system. The shape-memory alloy at superelastic property regime buckles gradually in quasi-static loading, and fully recovers upon unloading. However, the buckling of aluminum tube is sudden and catastrophic, and shows permanent deformation. This gradual buckling of shape-memory alloy is associated with the forward and reverse transformation of stress-induced martensite and seems to have a profound effect on the unstable deformation of tube structures made from shape-memory alloy.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.50-56
• /
• 2003

This paper proposes a coding scheme of control channel for mobile packet communication to maximize the minimum Hamming distance, which is based on shifting of basis vectors of Reed Muller code with optimized dynamic puncturing and/or(partial) sequence repetition. Since the maximum likelihood decoding can be performed using the extremely simple FHT(Fast Hadamard Transformation), it is suitable for real time optimum decoding of control channel information with very little complexity. We show applications of the proposed coding method to TFCI(Transport Format Combination Indicator) code in split and normal modes of 3GPP W-CDMA system. We also discuss how this method can reduce rate indication error over AWGN(Additive White Gaussian Noise) as well as fading channels when the proposed coding scheme is applied to 1xEV-DV system of $3^{rd}$TEX> generation partnership project 2(3GPP2) to indicate the data rate transmitted on the reverse traffic channel by a Mobile Station(MS).

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.515-523
• /
• 2003

Shape memory is physical phenomenon which a platically metal is restored to its original shape by a solid state phase change by heating. TiNi alloy the most effective material in the shape memory alloy(SMA). To study(measure) recovery stress of intelligent composite. Ti50-Ni50 shape memory matrix with prestrain SMA fiber. When SMA fiber of the intelligent composite is heated over austenite starting temperature(As) by electric heating. a recovery stress are generated. The recovery stress of the intelligent composite was measured by strain gage or photoelastic experiment. Measuring method of recovery stress by photoelastic experiment was developed in this research. It was certified that photoelastic experiment was more effective and more precise than strain gage method in the measurement of recovery stress.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.389-394
• /
• 1994

The lattice filter formed transfer function has the advantage of computer simulation in the analysis of muffler. The transfer function is derived by using z-transformation for perforated elements in through-flow, cross-flow and reverse-flow type. A computer program for the prediction of the performance of automotive mufflers is developed using the transfer functions for uniform tube, open termination, expansion element, perforated elements, etc. The analytical results are verified by comparing with the experimental results for the transmission loss of a muffer. The effect of geometric configuration change of the muffler was invesigated in order to improve the performance of noise attenuation.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.107-113
• /
• 2005

This paper presents a method to reduce errors in registration, which is used in transformation coordinate system of the multiple measuring data. In general, the ICP algorithms and feature-based approaches are used for registration. In order to measure wrap-around object, it is necessary to change the scanning direction or set-up of the object. A fixture is made to reduce registration errors caused by inaccurate center point of tooling balls, providing the more accurate registration method. And, the motorized fixture controls rotation and tilting to get precise the measuring data and registration. The proposed motorized fixture and registration method have advantages in accurate registration and precise measurement, compared with the conventional methods.

• 열처리공학회지
• /
• 제17권6호
• /
• pp.342-345
• /
• 2004

In this work, a new method of measuring volume fraction of deformation-induced ${\varepsilon}$ martensite is proposed using endothermic heat on reverse transformation. As grain size increases, the amount of ${\varepsilon}$ martensite forming on cooling increases. However, with a decrease in grain size, more ${\varepsilon}$ is induced by deformation, improving shape memory effect.

• Advances in concrete construction
• /
• 제15권5호
• /
• pp.313-319
• /
• 2023

In this paper, the analytic solution has been found by using truncation approach. With the help of suitable substitution, different physical parameters are yielded in their non-dimensional form. The governing boundary layer partial differential equations are reduced to a set of ordinary ones by using appropriate similarity transformations. The velocity profile across the domain have also been taken into account. The effect normal velocity profiles buoyancy parameter, slip parameter, shrinking parameter, Casson fluid parameter on the heat profile. It is found that the normal velocity profiles rise with the buoyancy parameter and for the slip parameter. It is observed that the normal velocity profile decreases with the increase of shrinking parameter. The reverse behiour is found for the Casson fluid parameter. The results are numerically computed, analyzed and discussed. For the efficiency of present model, the results are compared with earlier investigations.