• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.1 no.1
• /
• pp.172-177
• /
• 1990

The reverse of reinforcement technique was used in treating rumination of a 12-year old (estimated age) mentally retarded child in a residential setting. The subject's rumination pattern was first to vomit the food onto the floor and then to eat it back in several attempts. Consequently, the way to reverse the contingency of rumination in this child was to take away the discharge whenever rumination occurred. An ABAB single subject design was adopted to evaluate the treatment effect. In baseline 1 the frequency of his rumination for 2.5 hours after eating was an average of 46(range= 30-62), while decreased to 6.7 in treatment condition 1. However, when the discharge was not taken away in baseline 2, his rumination increased to 34 times and then decreased to zero to 1 time when the reverse of reinforcement was reinstituted in treatment condition 2. The results clearly indicate that the reverse of reinforcement which was implemented in the form of removing the discharge from the floor was successful. It was reported that the treatment effect has been maintained over 10 months post treatment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.9-12
• /
• 2005

This paper investigated the temperature history of mass concrete mock up structure considering different heat generation by varying with mixture proportion. Setting time difference between high early strength mixture (E-P) and retarding mixture (R-F30) was 14.5hours. Incorporation of $30\%$ of fly ash contributed to $10^{\circ}C$ of hydration heat reduction. In generally used C and D combination, bottom concrete shows earlier hydration, while E-J combination showed reverse tendency and thus, this method can reduce the crack occurrence. Therefore, heat generation difference method has beneficial effect on reducing crack induced by hydration heat resulting from heat generation difference between surface and center section.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1842-1850
• /
• 1997

This paper proposes a new rearrangeable algorithm in multistage reverse shuffle/exchange network. The best known lower bound of stages for rearrangeability in symmetric network is 2logN-1 stages. However, it has never been proved for nonsymmetric networks before. Currently, the best upper bound for the rearrangeability of a shuffle/exchange network in nonsymmetric network is 3logN-3 stages. We describe the rearrangeability of reverse shuffle/exchange multistage interconnection network on every arbitrary permutation with $N{\le}16$. This rearrangeability can be established by setting one more stages in the middle stage of the network to allow the reduced network to be topological equivalent to a class of rearrangeable networks. The results in this paper enable us to establish an upper bound, 2logN stages for rearrangeable reverse shuffle/exchange network with $N{\le}16$, and leads to the possibility of this bound when $N{\le}16$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.452-459
• /
• 2020

The electric actuator receives the user's command input signal (open/closed/stop), checks the status of various sensors (valve position, rotational force, motor status, etc.)in the actuator, and controls the motor forward/reverse to open and close the valve. It is a device that outputs the current state of an actuator (valve) and is used in various fields such as dams, power plants, water and sewage facilities, and oil pipeline facilities. If an electric actuator is installed in a power plant and a problem occurs during operation, it can cause a large economic loss, so system reliability is vert important. In this study, in order to increase the safety of the electric actuator, the development of an electric actuator control device capable of setting the ON/OFF time in hardware was conducted to solve the reliability problem that may occur in software. In addition, the electric actuator control device development environment was developed using Xilinx's Spartan7 FPGA and Altium tool.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.275-281
• /
• 2016

One of the most important things for quality to meet ship-production schedule is an accuracy control. A ship is assembled by welding through whole production process, so it is important that loss by correction will not happen as much as possible by using some engineering skills like reverse design, reverse setting and margin for thermal shrinkage. These efforts are a quite effective in fabrication stages, but not in erection stages. If a ship block which consists of common steel is exposed to directional solar radiation, its dimensional accuracy will change high as time by its thermal expansion coefficient. Therefore, the measuring work would be often done at dawn or evening even with having a very accurate device. In this study, an FE analysis method is developed to solve this problem. It can change measured data affected by solar thermal distortion to ones not, even though ship-block is measured at an arbitrary time. It will use the time when measuring, the direction of block and the weather record by satellites. It is confirmed by a comparison between measured data of a ship-block and the result by suggested analysis method. Furthermore, a pre-processing system is also developed for fast application of the suggested analysis method.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.91-103
• /
• 2012

Network mobility (NEMO) based on mobile IP version 6 has been proposed for networks that move as a whole. Route optimization is one of the most important topics in the field of NEMO. The current NEMO basic support protocol defines only the basic working mode for NEMO, and the route optimization problem is not mentioned. Some optimization schemes have been proposed in recent years, but they have limitations. A new NEMO route optimization scheme-involving a combination of the optimized route cache protocol (ORC) and reverse routing header (RRH) and the use of a quota mechanism for optimized sessions (OwR)-is proposed. This scheme focuses on balanced performance in different aspects. It combines the ORC and RRH schemes, and some improvements are made in the session selection mechanism to avoid blindness during route optimization. Simulation results for OwR show great similarity with those for ORC and RRH. Generally speaking, the OwR's performance is at least as good as that of the RRH, and besides, the OwR scheme is capable of setting up optimal routing for a certain number of sessions, so the performance can be improved and the cost of optimal routing in nested NEMO can be decreased.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.194-200
• /
• 2009

This study provides a heuristic algorithm to solve the locating problem of repair service centers (RSCs). To enhance the customer service level with more satisfaction and quicker responsiveness, the locating problem of RSCs has become one of the important issues in reverse supply chain management. This problem is formulated as a zero-one mixed integer programming in which an exiting distributor will be considered to be an un-capacitated repair service center for the objective of cost-minimizing. Since logistical costs are highly interrelated with the multinational location of distributors and RSCs, the fixed cost for setting a repair service center, variable cost, transportation cost, and exchange rates are considered in this study. Recognizing the selection of un-capacitated RSCs' locations is a combinatorial optimization problem and is a zero-one mixed integer programming with NP-hard complexity, we provide a heuristic algorithm named as incremental cost matrix procedure (ICMP) to simplify the solving procedure. By using the concise and structural cost matrix, ICMP can efficiently screen the potential location with cost advantage and effectively decide which distributor should be a RSC. Results obtained from the numerical experiments conducted in small scale problem have shown the fact that ICMP is an effective and efficient heuristic algorithm for solving the RSCs locating problem. In the future, using the extended ICMP to solve problems with larger industrial scale or problems with congestion effects caused by the variation of customer demand and the restriction of the RSC capacity is worth a further investigation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2210-2220
• /
• 2009

Independent-suspension type axles for heavy duty special vehicles are usually produced by only a few specialized companies. The special techniques, such as designing, producing, testing techniques has been unveiled. The test of durability with the vehicle in which is installed a prototype taking several years is required for setting the designing parameters. In this research, through-drive the core-component of the independent-suspension type axle has been tested with the reverse engineering and the testing methods for the confirmation of the accomplishment in the development goal has been suggested. Also the prototype is developed from designing and testing the design with the CAD and CAE tools. As a result, the process and testing methods studied in this research are useful in the development of power train.

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.2
• /
• pp.41-55
• /
• 2019

Objective : This study was conducted to validate the content validity of the Korean version of the school setting interview (SSI) that assesses the adequacy of school environments for students aged 9-19. Methods : The Korean version of the SSI, which was completed via a translation-reverse translation process, was verified by conducting a questionnaire on category suitability two times with 35 experts. Results : The content validity index (CVI) for the entire K-SSI tool was .90 in the first test. The "Maps and diagrams" measurement in reading items and the "Taking a shower" measurement in sports activities were both below .75. A second round of verification was conducted after the CVI was modified. As a result, the secondary verification CVI results were further raised to .93. Conclusion : This study confirmed that the K-SSI contains items that are appropriate to Korean culture; it has been proven to have high content validity. Future continuous research and clinical use are required to study the validity and reliability of the K-SSI. Further, this tool should also be applied to students with diverse disabilities who face difficulties in school settings.

• Kyungpook Mathematical Journal
• /
• v.55 no.4
• /
• pp.1053-1067
• /
• 2015

A two-direction multiscaling function ${\phi}$ satisfies a recursion relation that uses scaled and translated versions of both itself and its reverse. This offers a more general and flexible setting than standard one-direction wavelet theory. In this paper, we investigate how to find and normalize point values and derivative values of two-direction multiscaling and multiwavelet functions. Determination of point values is based on the eigenvalue approach. Normalization is based on normalizing conditions for the continuous moments of ${\phi}$. Examples for illustrating the general theory are given.