• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.4
• /
• pp.398-407
• /
• 2008

We consider a product recovery system that a single product is stocked in order to meet a demand from customers who may return products after usage. This paper addresses a problem of when to release a procurement process to replenish serviceable inventory and how many new products to procure. The structure of the optimal procurement policy is examined and numerically identified as a monotonic threshold curve. A numerical procedure is presented to jointly find the optimal procurement order size, optimal procurement policy, and optimal discounted profit. Sensitivity analysis also indicates that these optimal performance measurements have monotonic properties with respect to system parameters.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.231-234
• /
• 1998

The soft reverse recovery characteristics of P-I-N power diodes by different lifetime killer were compared in this paper. It was concluded that the best local lifetime control at N- base was achieved through the optimization of penetrated depth into the wafer by 5 MeV proton irradiation, resulting in significant soft recovery performance in our study. The results of 5∼12 MeV electron irradiation and platinum diffusion were also discussed here.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.4
• /
• pp.459-469
• /
• 2016

Gas hydrate desalination process is based on a liquid to solid (Gas Hydrate, GH) phase change followed by a physical process to separate the GH from the remaining salty water. The GH based desalination process show 60.5-90% of salt rejection, post treatment like reverse osmosis (RO) process is needed to finally meet the product water quality. In this study, the energy consumption of the GH and RO hybrid system was investigated. The energy consumption of the GH process is based on the cooling and heating of seawater and the heat of GH formation reaction while RO energy consumption is calculated using the product of pressure and flow rate of high pressure pumps used in the process. The relation between minimum energy consumption of RO process and RO recovery depending on GH salt rejection, and (2) energy consumption of electric based GH process can be calculated from the simulation. As a result, energy consumption of GH-RO hybrid system and conventional seawater RO process (with/without enregy recovery device) is compared. Since the energy consumption of GH process is too high, other solution used seawater heat and heat exchanger instead of electric energy is suggested.

• The Korean Journal of Physiology and Pharmacology
• /
• v.23 no.1
• /
• pp.63-70
• /
• 2019

We aimed to propose a novel computational approach to predict the electromechanical performance of pre- and post-mitral valve cerclage annuloplasty (MVCA). Furthermore, we tested a virtual estimation method to optimize the left ventricular basement tightening scheme using a pre-MVCA computer model. The present model combines the three-dimensional (3D) electromechanics of the ventricles with the vascular hemodynamics implemented in a lumped parameter model. 3D models of pre- and post-MVCA were reconstructed from the computed tomography (CT) images of two patients and simulated by solving the electromechanical-governing equations with the finite element method. Computed results indicate that reduction of the dilated heart chambers volume (reverse remodeling) appears to be dependent on ventricular stress distribution. Reduced ventricular stresses in the basement after MVCA treatment were observed in the patients who showed reverse remodeling of heart during follow up over 6 months. In the case who failed to show reverse remodeling after MVCA, more virtual tightening of the ventricular basement diameter than the actual model can induce stress unloading, aiding in heart recovery. The simulation result that virtual tightening of the ventricular basement resulted in a marked increase of myocardial stress unloading provides in silico evidence for a functional impact of MVCA treatment on cardiac mechanics and post-operative heart recovery. This technique contributes to establishing a pre-operative virtual rehearsal procedure before MVCA treatment by using patient-specific cardiac electromechanical modeling of pre-MVCA.

• Environmental Engineering Research
• /
• v.23 no.4
• /
• pp.474-484
• /
• 2018

The cleaning efficiency of reverse osmosis (RO) membranes inevitably fouled by organic foulants depends upon both chemical (type of cleaning agent, concentration of cleaning solution) and physical (cleaning time, flowrate, temperature) parameters. In attempting to determine the optimal procedures for chemical cleaning organic-fouled RO membranes, the design of experiments concept was employed to evaluate key factors and to predict the flux recovery rate (FRR) after chemical cleaning. From experimental results and based on the predicted FRR of cleaning obtained using the Central Composite Design of Minitab 17, a modified regression model equation was established to explain the chemical cleaning efficiency; the resultant regression coefficient ($R^2$) and adjusted $R^2$ were 83.95% and 76.82%, respectively. Then, using the optimized conditions of chemical cleaning derived from the response optimizer tool (cleaning with 0.68 wt% disodium ethylenediaminetetraacetic acid for 20 min at $20^{\circ}C$ with a flowrate of 409 mL/min), a flux recovery of 86.6% was expected. Overall, the results obtained by these experiments confirmed that the equation was adequate for predicting the chemical cleaning efficiency with regards to organic membrane fouling.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.6
• /
• pp.473-480
• /
• 2020

High-pressure membrane system like nanofiltration(NF) and reverse osmosis(RO) was investigated as a part of water treatment processes to produce high quality potable water with low organic matter concentration through membrane module tests and design simulation. River water and sand filtration permeate in Busan D water treatment plant were selected as feed water, and NE4040-90 and RE4040-Fen(Toray Chemical Korea) were used as NF and RO membranes, respectively. Total organic carbon(TOC) concentrations of NF and RO permeates were mostly below 0.5 mg/l and the average TOC removal rates of NF and RO membranes were 93.99% and 94.28%, respectively, which means NF used in this study is competitive with RO in terms of organic matter removal ability. Different from ions rejection tendency, the TOC removal rate increases at higher recovery rates, which is because the portion of higher molecular weight materials in the concentrated raw water with increasing recovery rate increases. Discharge of NF/RO concentrates to rivers may not be acceptable because the increased TDS concentration of the concentrates can harm the river eco-system. Thus, the idea of using NF/RO concentrate as the raw water for industrial water production was introduced. The design simulation results with feed water and membranes used in this work reveal that the raw water guideline can be satisfied if the recovery rate of NF/RO system is designed below 80%.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.57-63
• /
• 1997

The power diode's reverse recovery current when switching on the main switch results in losses of the switch in boost converter. The high turn-on losses can be controlled by snubber circuit. In this paper, a new snubber circuit which can reduce the turn-on current stress mentioned above and recover trapped snubber energy in capacitor is proposed for boost converter. The control of boost converter with proposed snubber is the same as the conventional one. In addition, the energy recovery circuit can be implemented with a few passive components. The analysis for proposed circuit is presented, and the validity of the circuit is verified through simulation and experiment.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.59-68
• /
• 2013

In the present study, sea water reverse osmosis desalination system was composed with an ultra-filtration membrane as a pre-treatment. Sea water was induced into the pre-treatment composed with an auto-screen filter and an ultra-filtration membrane. It was proved that the permeate of the pre-treatment was adequate for reverse osmosis desalination system by measuring the $SDI_{15}$ and the turbidity. Feed salinities was changed by mixing the brine and the permeate. Inlet salinities effected the performances of sea water reverse osmosis desalination system in a large amount such as the salt rejection, the recovery ratio, the pressure, the product salinity. Energy consumptions per the ton of the product were almost linearly increased with the inlet salinities.

• Animal cells and systems
• /
• v.5 no.1
• /
• pp.65-69
• /
• 2001

Obtaining mutant animals is important for studying the function of a particular gene. A chemical mutagenesis was first carried out to generate mutations in C. elegans. In this study, we used ultraviolet-activated 4,5',8-trimethylpsoralen to induce small deletion mutations. A library of mutagenized worms was prepared for recovery of candidate animals and stored at $15^{\circ}C$ during screening instead of being made into a frozen stock library. In order to isolate deletion mutations in target genes, a polymerase chain reaction (PCR)-based screening method was used. As a result, two independent mutants with deletions of approximately 1.0 kb and 1.3 kb were isolated. This modified and improved reverse genetic approach was proven to be effective and practical for isolating mutant animals to study gene function at the organismal level.

• Clinics in Shoulder and Elbow
• /
• v.23 no.2
• /
• pp.100-104
• /
• 2020

Function and strength of the deltoid muscle are important in reverse shoulder arthroplasty (RSA). Moreover, location and shape of the acromion, clavicle, and scapular spine, which are origins of the deltoid muscle, are also important. The frequency of os acromiale is 5% to 15%; however, it is rare in the Asian population, affecting approximately 0.7% of Koreans. RSA has rarely been reported in patients with os acromiale. We present a case series of two patients with cuff tear and arthropathy combined with os acromiale who underwent RSA. From 2016 to 2018, two patients with os acromiale who presented with pain and limited range of motion (ROM) underwent RSA with cuff tear arthropathy using the subscapularis-sparing deltopectoral approach. Their ROM, visual analog scale (VAS), and satisfaction were evaluated before and after surgery. In both patients, VAS decreased, ROM increased, and postoperative satisfaction increased. There were no specific complications due to os acromiale. The VAS, ROM, and satisfaction of patients improved after surgery compared with values before surgery. However, careful attention must be given during surgery to ensure optimal repair and recovery.