• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.991-997
• /
• 2003

The effect of A1$_4$C$_3$ additive on the thermoelectric properties of SiC ceramics were studied. Porous SiC ceramics with 47∼59% relative density were fabricated by sintering the pressed $\alpha$-SiC powder compacts with A1$_4$C$_3$at 2100∼220$0^{\circ}C$ for 3 h in Ar atmosphere. Crystalline phases of the sintered bodies were identified by powder X-Ray Diffraction (XRD) and their microstructures were observed with a Scanning Electron Microscope (SEM). In the case of A1$_4$C$_3$ addition, the phase transformation of 6H-SiC to 4H-SiC could be observed during sintering. The Seebeck coefficient and electrical conductivity were measured at 550∼95$0^{\circ}C$ in Ar atmosphere. In the case of undoped specimens, the Seebeck coefficients were positive (p-type semiconducting) possibly due to a dominant effect of the acceptor impurities (Al, Fe) contained in the starting powder and electrical conductivity increased as increasing sintering temperature. Electrical conductivity of A1$_4$C$_3$doped specimen is larger than that of undoped specimen under the same condition, which might be due to the reverse phase transformation and increasing of carrier density. And the Seebeck coefficient of A1$_4$C$_3$ doped specimen is also larger than that of undoped specimen. The density of specimen, the amount of addition and sintering atmosphere had significant effects on the thermoelectric property.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.408-420
• /
• 2015

This study investigated the effect of heat treatment conditions on the quality and antioxidant activities of Korean traditional actinidia (Actinidia arguta) cultivars puree. Heat treatment on actinidia puree was conducted at $70{\sim}90^{\circ}C$ for 1 min to 5 mins, while a control sample of the actinidia puree was prepared without heat treatment. In all the samples, except for the sample treated at $90^{\circ}C$ for 5 mins, pH and Brix degree was not dramatically changed. Pulp content decreased with increasing temperature and time. L and the a value of color increased with increasing temperature and time. However, the b value showed a reverse tendency with L and the a value. Viscosity and gumminess increased as heat temperature and time increased, though cohesiveness was not significantly changed depending on temperature and time. Coliform and yeast were not detected on all samples and the number of aerobic bacteria and mold decreased as temperature and time increased. Vitamin C and total phenolic content of the puree was not changed for 1, 3, and 5 mins at $70^{\circ}C$ and for 1 and 3 mins at $80^{\circ}C$, but significantly decreased with increasing time at $90^{\circ}C$. Furthermore, the antioxidant activities of the puree, such as DPPH radical scavenging activity, ABTS radical scavenging activity, and FRAP (ferric reducing antioxidant power) showed a similar tendency with total phenolic content.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.97-106
• /
• 2016

This study tries to seek the is the realistic improvements and legislative measures about current medical advertising which was in the Court on 12 May 2015 by presenting and discussion the understanding, problems and its alternative direction of pre-deliberation on the existing law which is the decision on the constitutionality of health care advertising regulated health care advertising General commercial advertising has the right which have to be protected as the terms of the protection of know and freedom of expression and advertiser's there are sure to be in a value to be protected. Medical advertising is also a person in addition to the absolute value that includes both Due to the particularity of medical advertising in terms of life and the right to health Until now, this has been the target of strong regulations are changing the policy of gradual deregulation in our country, including the country. Medical advertising on the current medical law had been to be checked by pre-deliberation of the executive power. However, due to unconstitutional, in the circumstances which a false hype is flooding and increasing, it has been realized that the fair competition of medical community, life and health rights of the people are threatened by in reverse. In this regard, the abolition of the pre-deliberation system of medical advertising can be welcomed by abolition of the old system which is the legal and institutional censorship. Since its abolition, the alternative policy direction is insufficient also it is not clear. Therefore we need to study this. Therefore, in this paper, we try to find general theoretical background and problem of pre-deliberation system of medical advertising. Also, as trying to find feasibility or ambiguity of regulation and issues about medical advertising on medical law, we argued the provision of special measures of the medical advertising for introduction of integrated medical advertising deliberation committee which can ensure the independence and autonomy, strengthening of the monitoring on the internet advertising, legal resolving through amendments, strengthening of penalties, and establish special measures of medical advertising for the medical privatization and demand for the foreign medical tourist, etc. Empirical study about practical regulatory measures of medical advertising which converged the various opinions of consumer groups, government and academia, and medical community, and we expect hope to see the more realistic alternative provision.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.927-935
• /
• 2019

Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.9-20
• /
• 2018

When a large-scale photovoltaic (PV) system is introduced into a distribution system, the customer's voltage may exceed the allowable limit ($220V{\pm}6%$) due to voltage variations and reverse power flow in the PV system. In order to solve this problem, we propose a method for adjusting the customer voltage using the existing step voltage regulator (SVR) installed in the primary feeder. However, due to the characteristics of a mechanically operating SVR, the customer voltage during the tap changing time of the SVR is likely to deviate from the allowable limit. In this paper, an energy storage system (ESS) with optimal operation strategies, and an appropriate capacity calculation algorithm are proposed, and the parallel driving scheme between the SVR and the ESS is also proposed to solve the customer voltage problem that may occur during the tap changing time of the SVR. The simulation results show that the allowable limit of the customer voltage is verified by the proposed methods during the tap changing time of the SVR when the large-scale PV system is connected to the distribution system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.995-1006
• /
• 2003

It is well know that in the wireless communication systems the transmitted signals can suffer from multipath fading due to the wave propagation characteristics and the obstacles over the paths, resulting in serious reduction in the power of the received signals. However, it is possible to take advantage of the inherent diversity imposed in the multipath reception if the underlying channel can be properly estimated. One of the diversity reception methods in this case is Rake processing. In this paper we study the Rake receivers for the direct-sequence spread-spectrum communication systems utilizing PN (pseudo noise) sequences to achieve spread spectrum. A conventional Rake receiver can use the finite-duration impulse (FIR) filter followed by the PN sequence demodulator, where the FIR filter coefficients are the reverse-ordered complex conjugate values of the fading channel impulse response estimates. Here, we propose a new Rake processing method by replacing the aforementioned PN code sequence with a new set of optimum demodulator coefficients. More specifically, the concept of the new optimum Rake processing is first introduced and then the optimum demodulator coefficients are theoretically derived. The performance obtained using the new optimum Rake processing is also calculated. The analytical results are verified by computer simulation. As a result, it is shown that the new optimum Rake processing method improves the MSE performance more than 10 dB over the conventional one using the fixed PN sequence demodulator. It is also shown that the new optimum Rake processing method improves the MSE performance about 10 dB over the Adaptive Correlator that performs the combining of the multipath components and PN demodulation concurrently. And finally, the MSE performance of the optimum Rake demodulator is very close to the MSE performance of OPSK demodulator under the AWGN channel.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.478-485
• /
• 2014

This study is to form the self assembly of cubic crystalline phase to penetrate into the skin epidermis. The various performance synthesized diglyceryl phytylacetate (DGPA) having hydroxyl group (-OH) and 4 methyl chains with phytyl group was carried out as an amphoteric lipid such as emulsifying power, self assembly. Emulsifying activity of DGPA was very stabilized on only 1% of small content, it could make a W/O emulsion containing high internal phase incorporated with water. Cubic liquid crystal structure with DGPA on three-phase diagram was formed, when mixed DGPA, dimethicone (2CS), and water. Through three-phase diagram forming the cubic liquid crystal area, hexagonal structure zone, and mixing water phase and hexagonal structure area, reversed micelle area were respectively certified. Its structure was proved by the SAXS (small angled x-ray scattering) analysis. As an application, formation of cubosome containing 10% of magnesium ascorbylphosphate and 5% of pyridoxine tris-hexyldecanoate was encapsulated. Occlusive effect of cubosome had above 1.7 times better than reversed micelle. From using poloxamer of dispersing agent, phase structure recovered from W/O emulsion to cubic liquid crystal phase when storage in $33^{\circ}C$ incubator. Therefore, our this study is expected to be as epidermal-dermal skin absorbers in skin care cosmetics and pharmaceuticals industries as raw materials to form a cubic crystal phase through a more in-depth research to DGPA having amphoteric lipid property.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.485-497
• /
• 2019

The Jade Investiture Books in Joseon Dynasty shows diverse facies with various petrographic characteristics to green and white based on color. In lithologically, the green rocks are jade composed of calcite and serpentine, and the white ones are marbles consisting mainly in crystalline calcite. As a result of X-ray diffraction of jade rocks, the more green in color, the more increased intensity of serpentine appears. Therefore, the grade of jade is correlated with contents of serpentine. The Jade Investiture Books owned by the National Palace Museum of Korea are subdivided with 104 (41.3%) books made by only jade rocks, 98 (38.9%) books made by only marbles, and 50 (19.8%) books mixed with jade rocks and marbles. Among the mixed ones, 47 (18.6%) books consisted mainly of the marbles. This result shows the superior marble books occupy more than half of the total books. The Jade Investiture Books made in early Joseon Dynasty are composed of high grade jade. However, the grade of jade had decreased as the kings changed in process of time, and the composition of marble had increased in reverse proportion of jade. The quality of letter pigments, metal accessories and fabrics also had decreased with jade. These trends are reflected in the aspect of society such as weakening royal authority, national power and finance with the course of time. The jade of the books has different mineralogical characteristics from some modern jade produced in Chuncheon nephrite and Buyeo precious serpentine in Korea. Meanwhile, there is ancient literature that described quarries from Namyang in Hwaseong of Gyeonggi province. This area has a wide distribution of gneiss, limestone and limesilicate rocks are interbedded between muscovite schist. The limesilicate rocks contain diopside, which produced serpentine through alteration. It has possibility to make the Jade Investiture Books using these small amounts of jade through mining activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.22-33
• /
• 2021

In the case of open phase faults caused by the disconnection of distribution feeders interconnected to a PV system, many problems can occur depending on the core type and wiring method of the grid-connected transformers. Moreover, open phase faults are difficult to detect because the open phase voltage of the existing protection relay (Open Phase Relay (47)) can be maintained, even though a disconnection fault occurred, depending on the wiring method and the iron core type of the grid-connected transformer for a PV system. Therefore, this paper proposes a novel algorithm to detect open phase faults by comparing the currents and phases between the primary and secondary sides of a grid-connected transformer. In addition, this paper presents the modeling of a distribution system and protection devices for detecting open phase faults using PSCAD/EMTDC S/W, and implements a test protection device for detecting open phase faults based on the above-mentioned modeling. The simulation and test results confirmed that the proposed algorithm is useful for detecting open phase faults according to the wiring method and iron core type of grid-connected transformer for a PV system because operation slope and unbalance rate of the primary current exceed the setting value (30[%]) of the protection device.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.1
• /
• pp.59-73
• /
• 2019

A decontamination technology for radioactive liquid wastes was newly developed and hypothetically applied to the liquid waste management system (LWMS) of the nuclear power plant (NPP) to evaluate its decontamination efficacy for the purpose of the fundamental reduction of spent resins. The basic principle of the developed technology is to convert major radionuclide ions in the liquid wastes into inorganic crystal minerals via chemical or biological techniques. In a laboratory batch experiment, the biological method selectively removed more than 80% of cesium within 24 hours, and the chemical method removed more than 95% of cesium. Other major nuclides (Co, Ni, Fe, Cr, Mn, Eu), which are commonly present in nuclear radioactive liquid wastes, were effectively scavenged by more than 99%. We have designed a module including the new technology that could be hypothetically installed between the reverse osmosis (R/O) package and the organic ion-exchange resin in the LWMS of the APR1400 reactor. From a technical evaluation for the virtual installation, we found that more than 90% of major radionuclides in the radioactive liquid wastes were selectively removed, resulting in a large volume reduction of spent resins. This means that if the new technology is commercialized in the future, it could possibly provide drastic cost reduction and significant extension of the life of resins in the management of spent resins, consequently leading to delay the saturation time of the Wolsong repository.