• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.120-127
• /
• 2016

본 연구에서는 수문의 설치방향에 따른 최적의 설치방향을 규명하기 위하여, 모형 제작에 의한 수문 진동실험을 수행하고, 진동특성이 연구되어진다. 47.5m 원형게이트가 아크릴을 사용하여 1:31 축척으로 제작되고, 납으로 질량이 보완된다. 먼저 모형을 검증하기 위하여 모형의 고유진동수가 측정되고, 원형 수문의 유한요소 해석 값으로 부터 환산된 고유진동수와 비교된다. 모형은 1.6m 폭을 갖는 콘크리트 수로에서 정방향과 역방향 설치에 따른 각각의 실험이 이루어 졌다. 각 방향 실험에서는 수문 개방고와 상하류 수위에 따른 여러 조건에서 수직진동이 측정되어 졌다. 실험결과를 바탕으로 정뱡향과 역방향 설치에 대한 진동현상을 서로 비교 분석하였다. 정방향 모형은 수문이 많이 열렸을 때 하단부의 수평트러스 부재를 치는 뒤돌아 치는 와류에 의하여 진동이 크게 발생하였고, 작은 개방고에서 suction force에 의한 진동이 발생하였다. 그러나 역방향 모형에서는 이러한 현상이 발생하지 않는다. 마지막으로 95m 수문의 진동실험결과와 본 47.m의 실험결과를 같이 비교하여 평가하였다. 실험결과 여러 실험 조건에서 진동이 작게 측정되는 역방향 배치 모형이 더 합리적인 것으로 분석되었다.

• 한국유통학회:학술대회논문집
• /
• 한국유통학회 2006년도 하계통합학술대회 발표논문집
• /
• pp.119-131
• /
• 2006

Reverse logistics (RL) covering the flow of products/parts in a reverse direction from product returns to product disposal. Companies are faced with a decision on whether to manage RL in house or to outsource it to a RL third party service provider (3PSP). A survey was conducted in 2004 to study RL outsourcing practices. Through the survey, various RL functions outsourced in industry are identified, and the factors considered to decide between in-house vs. outsourcing RL management are studied along with their importance. In addition, this research presents the performance measures of a 3PSP and problems faced by companies while managing RL in-house and outsourcing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.158-161
• /
• 2003

Extrusion of forward-gear and backward-rod by combined extrusion with controlling the extrusion velocity using a counter tool is studied. In the combined forward-backward extrusion with controlling extrusion velocity, only parts with short gear can be formed. To obtain longer gear parts, extrusion with reverse ram motion is carried out after the combined forward-backward extrusion process. In this method, combined forward-backward extrusion is carried out until excessive extrusion length is attained and then, the motion of the punch is stopped and the counter tool is moved in the inverse direction and returned to the position for obtaining the desired extrusion length. The experiment is carried out by using lead for billets as a model material. With reverse ram motion, longer gear teeth without under-filling defect can be formed than that by only combined extrusion with controlling extrusion velocity.

• 한국CDE학회논문집
• /
• 제3권1호
• /
• pp.22-30
• /
• 1998

The deflection yoke (DY) controls the direction of the electron beam that falls on the screen of the television monitor. Its quality depends on the shape and density of coils wound around the DY coil separator. Winding frames are used to make these coils, and therefore, their shapes are essential in making quality coils. A reverse engineering(RE) is applied to create the 3D model of the winding frame. It considerably shortens the design verification time and shows the level of accuracy that is feasible in the production mode. The paper explains each step of the reverse engineering process in detail.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.272-276
• /
• 2000

Reverse engineering refers to the process that creates a physical part from acquiring the surface data of an existing part using a scanning device. In recent years, as the non-contact type scanning devices become more popular, the huge amount of point data can be obtained with high speed. The point data handling process, therefore, becomes more important since the scan data need to be refined for the efficiency of subsequent tasks such as mesh generation and surface fitting. As one of point handling functions, the cross-sectioning function is still frequently used for extracting the necessary data from the point cloud. The commercial reverse engineering software supports cross-sectioning functions, however, these are only for cross-sectioning the point cloud with the constant spacing and direction. In this paper, adaptive cross-sectioning point cloud which allow the changes of the spacing and directions of cross-sections according to the constant spacing and direction. In this paper, adaptive cross-sectioning algorithms which allow the changes of the spacing and directions of cross-sections according to the curvature difference of the point cloud data are proposed.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.59-66
• /
• 1995

The hot electron induced effective channel length modulation (${\Delta}L_{H}$) and HEIP characteristics in PMOSFET's after bidirectional stress are presented. Trapped electron charges in gate oxide and lateral field are calculated from the gate current model, and ${\Delta}L_{H}$(${\Delta}L_{HD},\;{\Delta}L_{HS}$) is calculated using trapped electron charges and lateral field. It has been found that ${\Delta}I_{d}$and ${\Delta}L_{H}$ are more affected by the stress order (Forward-Reverse of Reverse or Reverse-Forward) than the stress direction, and they vary logarithmically with the stress time. In contrast, ${\Delta}V_{t}$ and ${\Delta}V_{pt}$ are more affected by the stress direction thatn the stress order. The correlation between ${\Delta}V_{pt}$ and the stress time can be explanined as the following polynomial functin: ${\Delta}V_{pt}$=AT$^{n}$. It has also been shown that PMOSFET degradation is related with the gate current and the effects of ${\Delta}V_{pt}$ is the most significant.

• 대한치과교정학회지
• /
• 제15권1호
• /
• pp.7-22
• /
• 1985

The purpose of this study was to analyze the stress distribution and the displacement in the maxillary complex after the application of the reverse headgear. The direction of force was parallel to the occlusal plane. Orthopedic force,300gm, was applied to the maxilla of the dry human skull in a forward direction. The stress distribution and the displacement within the maxillary Complex was analyzed by a 3-dimensional finite element method. The results were as follows: 1. The stress distribution at the molar region was greater than that at the anterior. 2. The stress distribution at the lateral side of the premaxilla was greater than that at the middle aide, especially high stress was noted at the canine eminence. 9. Compressive stress was noted only at the frontozygomatic suture of the zygomatic arch. 4. A forward, upward, and sideward displacement was noted at the entire nodal points of the zygomaticomaxillary suture portion. A displacement with a slight rotation was observed on the transverse palatine suture. 5. The maximum stress was observed at the lateral side of the maxillary tuberosity area, and generally the forward and downward displacement was noted at all this area.

• 동력기계공학회지
• /
• 제16권4호
• /
• pp.60-65
• /
• 2012

This study was carried out to investigate the effect of reverse transformation on the damping capacity in high manganese austenitic stainless steel. ${\alpha}^{\prime}$-martensite was formed with the specific direction and surface relief by deformation. Over 95% of the austenite phase was transformed to deformation-induced ${\alpha}^{\prime}$-martensite by 70% cold rolling. Reverse transformation became rapid above an annealing temperature of $550^{\circ}C$, but there was no significant transformation above $700^{\circ}C$. In addition, with increasing annealing time at $700^{\circ}C$, reverse transformation was induced rapidly, but the transformation was almost completed at 10 min. Damping capacity was increased up to $700^{\circ}C$, and than unchanged with the increasing annealing temperature. Damping capacity increased steeply with an increasing reverse treatment time up to 10min, whereas there were no significant change with a treatment time of more than 10 min. Damping capacity increased with an increasing the reversed austenite and was strongly affected by reversed austenite.

• 통상정보연구
• /
• 제12권2호
• /
• pp.183-211
• /
• 2010

This paper empirically investigated whether the dependence of manufacturing firms effects the influence strategies and long-term orientation based on the data from manufacturing firms in Korea. U.S., and Japan. Also, the proposed model was proven by the structural equation model with the data gathered from 105 manufacturing firms in Korea, 103 in U.S., and 83 in Japan. The findings were as follows. First, the dependence of all of manufacturing firms, regardless of country, positively affected the coercive influence strategies of distributors, whereas the dependence positively affected the noncoercive influence strategies in U.S. and Japan but in the case of Korea, it showed the reverse direction and were not statistically significant. Second, the dependence of Korean manufacturing firms positively affected the long-term orientation but American manufacturing firms showed the reverse direction and it was not statistically significant. In the case of Japanese manufacturing firms, the direction predicted in the paper was shown but was not statistically significant. Third, the coercive influence strategies positively affected the long-term orientation in Korea but it showed the negative relationship in Japan. Fourth, the noncoercive influence strategies positively affected the long-term orientation in all countries. Lastly, a few implications, limitations and future study issues were discussed.

• 대한산업공학회지
• /
• 제34권3호
• /
• pp.270-288
• /
• 2008

Among various environmental issues, those for worn-out products are increasingly important due to rapid development and improvement of products, shortages of dumping sites and waste-incineration facilities, and legislation pressures and customer recognitions to protect the environment. Under such circumstances, collection and product recovery activities give rise to additional material flows from customers back to collectors and reprocessors. Reverse logistics, the opposite direction of the conventional forward logistics, is concerned with the management of this material flow. In this paper, we consider the emerging concept of reverse logistics. First, the concept of sustainable development is explained to explain the philosophical background of various environmental issues. Second, we explain the basics of reverse logistics, which includes the overall structure and the classification of network types. Finally, we review the previous research articles, especially in the aspect of industrial engineering, after classifying the decision problems into : (a) product recovery strategy; (b) network design and operation; (c) inventory management; (d) disassembly problems; and (e) remanufacturing problems.