• Design & Manufacturing
• /
• 제9권1호
• /
• pp.18-22
• /
• 2015

Mold making and product manufacturing process was made by a die through a number of stages. Thereby, it takes a long period of time from the manufacture of mold until passed the products to consumers. However, it is not possible to meet the diverse desires purchasing of consumer. We made a 3D CAD Model aligned with product scan data using reverse engineering. Utilizing thereafter flow analysis to derive the optimal mold conditions, by applying the condition, and devised a mold fabrication process that is much shorter than the conventional process for fabricating a mold. In this study, the outlet cover to the product, it describes a process, as a result, it was confirmed that the number of steps can be shortened much more than the conventional process.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1033-1037
• /
• 2005

We have studied on the effect of the operation voltage according to the reverse twist for the different fringe field switching (FFS) structure. The FFS structure with a vertically patterned edge of the pixel electrode (VPP) has lower operation voltage comparing to the one with a horizontally patterned edge of the pixel electrode (HPP). The reason is like that the number of the pattern of the pixel edge for the VPP structure is one third comparing with the HPP structure and thus, there is small reverse twist area for the VPP structure. Actually, the reverse twist disturbs the twist of LC near adjacent active area, result that LCs near there have the unstable dynamics. That is, the operation voltage increases as the reverse twist area increases. Therefore, it is very important to design pixel electrode with a small reverse twist region for the FFS mode.

• 한국실내디자인학회논문집
• /
• 제25권5호
• /
• pp.71-81
• /
• 2016

This research has been carried out with the objects of sporting goods shops to find out what structure of those shops raises more interest from customers. The tracking eyes on the objects which are the same but seen to have different structures has revealed the followings. Customers' visual appreciation of Reverse left/right Images (11.1) was found to be higher than that of Original Images (10.6). Furthermore, the reverse left/right image of the space also was found to attract more interest from customers, which led them to have longer observation. The below is about the interpretation of the spatial exploration by observation time and the appreciation of its visual content in line with the experiment objects of selling spaces. The longer the space was observed, (1)the higher the expansive searching of space was, (2)the more spots were observed as if they did not know what to see after they first observed at early hours, (3)later (in the time range of 64~73 seconds) they came to look at the spots in which they got interested, (4)and then again they suddenly got lost what to see. When the change of observation characteristics by time range is reviewed, it can be seen that the searching of original images is changed from Divergent Feature to Convergent Feature when the observation time increases from the early stage of observation to the later. On the contrary, the reverse left/right images were found to have the opposite searching features, that is, from convergent exploration to divergent exploration. These findings show that the reverse left/right images of the sporting goods shops, which were the experiment objects, have more factors attracting customers' attention and interest and that it is the very shop-structure which makes customers have better visual appreciation of those shops.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.579-585
• /
• 2016

3차원 이미지 스캐닝 기술은 복잡한 비정형 건축물의 외피의 정확한 형상과 위치 데이터를 확보하는데 효과적이다. 3차원 이미지 스캐닝 기술의 세부 과정인 점 군집화, 메쉬표면 분리, 넙스 표면 생성, 파라메트릭 솔리드 모델을 통하여 비정형 건축물의 형상을 구축할 수 있다. 이에 본 연구는 비정형 건축물의 외장재 제작과 시공을 위한 3차원 이미지 스캐닝에 의한 역설계 프로세스와 사례 분석을 통하여 시사점을 도출한다. 본 연구의 결과는 역설계 기술을 사용한 3차원 형상 기술과 설계 요소화 방법을 다양한 건설 프로젝트에 활용할 수 있을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제89권5호
• /
• pp.467-477
• /
• 2024

Manufacturing industries, now-a-days, focus mostly on redesigning of the products for reducing cost and lead-time via detailed analysis of its composition and constructional design regarded as the Reverse Engineering (RE) process that involves the acquisition of relevant data of the original product, analysis for its functional use and finally, reproduction of the design for improving the functionality. In the present work, a new model based on optimization at different steps of RE, is proposed to redesign a structural component, which is subjected to severe tensile stress while in service. The component under study is an accessory namely, hitch bracket, attached to the rear axle of a tractor to connect it to the plough. The methodology includes building of a 3D Computer Aided Design (CAD) model from the scanned data of the existing component with the help of 3D scanner. Computer Aided Engineering (CAE) analysis is carried out on the CAD model with existing load conditions by Finite Element Analysis (FEA). Topological optimization is carried out giving rise to a modified/optimized design of the component. It is observed that the performance of the modified component improves significantly with simultaneous weight reduction without affecting its functional use and the manufacturing process setup.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.24-30
• /
• 2005

This research presents a modeling and a manufacturing method of screw flow meter. This paper introduces the efficient design and manufacturing method of screw type flow meter using reverse engineering and test technology. The methods introduced this paper utilize the reverse engineering that is increasing accuracy of modeling and manufacturing of reverse model. And then it can be used in performance test with hydraulic test equipment. Hence this can be used in the basic document for development of the quite accurate flowmeter.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1372-1381
• /
• 2017

This paper presents a high-side switch driver IC capable of improving the current sensing accuracy and providing reverse battery protection. Power semiconductor switches used to replace relay switches are encumbered by two disadvantages: they are prone to current sensing errors and they require additional external protection circuits for reverse battery protection. The proposed IC integrates a gate driver and current sensing blocks, thus compensating for these two disadvantages with a single IC. A p-sub-based 90-V $0.13-{\mu}m$ bipolar-CMOS-DMOS (BCD) process is used for the design and fabrication of the proposed IC. The current sensing accuracy (error ${\leq}{\pm}5%$ in the range of 0.1 A-6.5 A) and the reverse battery protection features of the proposed IC were experimentally tested and verified.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.601-606
• /
• 2005

This research presents a modeling and a manufacturing method of screw flow meter. This paper introduces the efficient design and manufacturing method of screw type flow meter using reverse engineering and test technology. The methods introduced this paper utilize the reverse engineering that is increasing accuracy of modeling and manufacturing of reverse model. And then it can be used in performance test with hydraulic test equipment. Hence this can be used in the basic document for development of the quite accurate flowmeter.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.132-137
• /
• 2005

This research presents a modeling and a manufacturing method of screw type flow meter. This paper introduces the efficient design and manufacturing method of screw type flow meter using reverse engineering and test technology. The methods introduced this paper utilize the reverse engineering that is increasing accuracy of modeling and manufacturing of reverse model. And then it can be used in performance test with hydraulic test equipment. Hence this can be used in the basic document for development of the quite accurate flow meter.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.313-319
• /
• 2019

Induction motors connected with a three-phase AC system may malfunction due to reverse phase or open phase faults. Conventional overcurrent relays and overheating relays are used to prevent such accidents; however, their drawbacks include a low response speed and false operation. Therefore, in this study, a digital relay for the reverse-open phase was designed and fabricated. This relay can detect the reverse phase and open phase faults and send a trigger signal to the control circuit. The proposed relay was developed based on a microcontroller. The detection times of the reverse phase and open phase were verified as 320ms and 80ms, respectively. Compared with conventional relays that only protect the motor from one type of fault, the proposed relay can detect both, reverse phase and open phase faults. In addition, the fault detection, identification criterion, and trigger signal patterns can be modified by programming according to the requirements of users.