Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

Reverse engineering of concentric plug cover by 3D scanning and development of injection mold

3D 스캔을 이용한 콘센트 커버의 역설계 및 금형 개발

  • Kim, Dong-Wook (Department of Metalmold Design Engineering, Kongju National University) ;
  • Choi, Young-Rock (Department of Metalmold Design Engineering, Kongju National University) ;
  • Shin, Sang-Eun (Department of Metalmold Design Engineering, Kongju National University) ;
  • Kim, Sei-Hwan (Department of Metalmold Design Engineering, Kongju National University) ;
  • Choi, Kyu-Kwang (Department of Metalmold Design Engineering, Kongju National University) ;
  • Han, Seong-Ryeol (Department of Metalmold Design Engineering, Kongju National University)
  • 김동욱 (공주대하교 금형설계공학과) ;
  • 최영락 (공주대하교 금형설계공학과) ;
  • 신상은 (공주대하교 금형설계공학과) ;
  • 김세환 (공주대하교 금형설계공학과) ;
  • 최계광 (공주대하교 금형설계공학과) ;
  • 한성렬 (공주대하교 금형설계공학과)
  • Accepted : 2015.02.26
  • Published : 2015.03.13
Download PDF
⟨ Previous Next ⟩

Abstract

Mold making and product manufacturing process was made by a die through a number of stages. Thereby, it takes a long period of time from the manufacture of mold until passed the products to consumers. However, it is not possible to meet the diverse desires purchasing of consumer. We made a 3D CAD Model aligned with product scan data using reverse engineering. Utilizing thereafter flow analysis to derive the optimal mold conditions, by applying the condition, and devised a mold fabrication process that is much shorter than the conventional process for fabricating a mold. In this study, the outlet cover to the product, it describes a process, as a result, it was confirmed that the number of steps can be shortened much more than the conventional process.

Keywords

References

  1. Lee, H.K., Kim, H.C. and Yang, G.E. A study on digital process of injection mold in reverse engineering, Journal of Korean Society of Precision Engineering, Vol. 19, No. 6, pp. 160-165, 2002.
  2. Lee, B.W. Kwon, H.J. Kim, C.D. and Park, S.J. A study on the construction of the product shoes analysis and fabrication by rapid prototyping technique, Proceeding of KSMT 2002 Winter Annual Meeting, pp. 1-5, 2002.
  3. 박준협, "역설계를 이용한 자동차부품의 사출성형해석의 관한연구," 동명대학교, 석사학위논문, 2009.
  4. 임원길, 김영일, 설권, "사출성형의 게이트 위치 최적화," 한국정밀공학회 춘계학술대회 논문집, pp. 787-791, 1996.
  5. 안동규, 김대원, "인서트 변형을 고려한 배터리 케이스 사출 성형 해석," 대한기계학회 추계학술 대회, pp. 1107-1112, 2008.
  6. Kim, J.M. Moon, H.J. Sim, K.B. Lee, S.K. and Cho, C.D. A study on reducing deformation of a wide-thin product manufactured by injection molding, Proceeding of KSME 2008 Autumn Annual Meeting. pp. 186-191, 2008.