• Title/Summary/Keyword: Reverse Channel

Search Result 229, Processing Time 0.023 seconds

Design of high-speed preamble searcher adequate for RACH preamble structure in WCDMA reverse link receiver (RACH 프리앰블 구조에 적합한 WCDMA 역방향 링크 수신기용 고속 프리앰블 탐색기의 설계)

  • 정은선;도주현;이영용;정성현;최형진
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.8A
    • /
    • pp.898-908
    • /
    • 2004
  • In this paper, we propose a high speed preamble searcher feasible for RACH(Random Access Channel) preamble structure in WCDMA reverse link receiver. Unlike IS-95, WCDMA system uses AISMA(Acquisition Indication Sense Multiple Access) process. Because of the time limit between RACH preamble transmission and AI(Acquisition Indicators), and the restriction on the number of RACH signatures assigned to RACH preamble, fast acquisition indication is required for efficient operation. The preamble searcher proposed in this paper is based on 2-antenna system and has adopted FHT algorithm that has the radix-2 16 point FFT structure. The acquisition speed using FHT is 64 times faster than the conventional method that correlates each signature. Based on their fast aquisition scheme, we improved the acquisition performance by calculating the correlation up to the 4096 chips of the total preamble length. The performance is analyzed by using Neyman-pearson method. The proposed algorithm has been applied for the implementation of WCDMA reverse link receiver modem successfully.

Performance of Parallel Interference Cancellation with Reverse-Link Synchronous Transmission Technique for DS-CDMA System in Multipath Fading Channels with Imperfect Power Control (불완전 전력 제어와 다중 경로 페이딩 채널에서 DS-CDMA 시스템을 위한 역방향링크 동기식 전송을 채용하는 병렬식 간섭 제거기의 성능)

  • Hwang Seung-Hoon;Kim Yong-Seok;Rhee Jin-Koo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.42 no.11
    • /
    • pp.87-92
    • /
    • 2005
  • This paper analyzes the performance for an improved multistage parallel interference cancellation (PIC) technique with a reverse-link synchronous transmission technique (RLSTT) for DS-CDMA system in a frequency-selective Rayleigh fading channel with an imperfect power control scheme. The performance degradation due to power control error (PCE), which is approximated by a log-normally distributed random variable, is estimated as a function of the standard deviation of the PCE. The uncoded bit error performance is evaluated in order to estimate the system capacity. Comparing with the conventional one-stage PIC system, we show achievable gain around $60\%$ by the RLSTT even in the presence of PCE. We conclude that the capacity can be further improved via RLSTT, which alleviates the detrimental effects of the PCE

Performance Analysis of the Smart Antenna System Utilizing the Characteristics of Pilot Channel in cdma2000 1X environments. (cdma2000 1x 환경에서 파일럿 채널의 특성을 이용한 스마트 안테나 시스템의 성능 분석)

  • 김기돌;이원철;안성수;최승원
    • Proceedings of the IEEK Conference
    • /
    • 2003.11a
    • /
    • pp.283-286
    • /
    • 2003
  • This paper presents a novel signal processing method for optimal beamforming of smart antenna system in cdma2000 1X mobile communication environments. This method utilizes characteristics of the reverse pilot channel of cdma2000 1X mobile communication systems, and applies them to improve the performance of an adaptive algorithm, which is used to a smart antenna system for beamforming.

  • PDF

Fabrication of Micro Electrodes by Reverse EDM and Its Applications (역방전 가공을 이용한 미세 전극 제작과 그 응용)

  • Choi Se Hwan;Kim Bo Hyun;Park Byung Jin;Chu Chong Nam
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.22 no.11 s.176
    • /
    • pp.159-164
    • /
    • 2005
  • For increasing productivity of micro electrochemical machining (MECM), the application of multiple electrodes was introduced. The electrodes were fabricated by reverse electrical discharge machining (REDM). By REDM micro electrodes with various shapes can be machined easily. According to capacitance and applied voltage, machining characteristics of reverse EDM were investigated and the optimal conditions for stable machining were suggested. By using multiple electrodes and a channel-shape electrode, holes and channels were machined on stainless steel by ECM.

Performance evaluation of the single-dwell and double-dwell detection schemes in the IS-95 reverse link (IS-95역방향 링크에서 단일 적분 및 이중 적분 검색 방식의 성능 분석)

  • 강법주;박형래;손정영;강창언
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.21 no.2
    • /
    • pp.383-393
    • /
    • 1996
  • This paper considers the evaluation of the ecquistion performance for an accesschannel preamble based on a random access procedure of direct sequence code division multiple access(DS/CDMA) reverse link. The parallel acquistion technique that employs the single-well detection scheme and the multiple-dwell(double-dwell) detection scheme is mentioned. The acquisition performance for two detection schemes is compared in therms of the acquisition probability and the acquisition time. The parallel acquisition is done by a bank of N parallel I/Q noncoherent correlators. Expressions on the detection, false alarm, and miss probabilities of the single-dwell and multiple-dwell(double-well) detection schemes are derived for multiple H$_{1}$ cells and multipath Rayleight fading channel. comparing the single-dwell detection scheme with the multiple-dwell(double-dwell) detection scheme in the case of employing the parallel acquisition technique in the reverse link,the numerical results show that the single-dwell detection scheme deomonstrates a better performance.

  • PDF

Erlang capacity for the reverse link of an imperfect power controlled DS/CDMA cellular system in multipath fading environments (다중경로 페이딩 환경에서 불완전 전력제어된 DS/CDMA 셀룰라 시스템의 역방향 링크에 대한 얼랑용량)

  • Kim, Hang-Rae;Kim, Nam
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.5
    • /
    • pp.1-9
    • /
    • 2000
  • In this paper, for the reverse link of a imperfect power controlled DS/CDMA cellular system when a mobile radio channel is a Rayleigh distributed multipath fading channel, A extended DS/CDMA blocking probability formula considering both shadowing and multipath fading is derived. Erlang capacity and equivalent channel number considering shadowing are analyzed and compared with those considering both shadowing and multipath fading, respectively. The DS/CDMA blocking probability is calculated based on the analysis method that obtains Erlang capacity and ICF(interference correction factor) using the median value of $E_{b(i)}$/ $I_{0}$ corresponding to each reverse link user Assuming that the blocking probability set 2%, it is observed that the Erlang capacity is 19.97 Erlang at the data rate $R_{b}$=9.6 kbps and 11.67 Erlang at the data rate $R_{b}$=14.4 kbps and then is less 16% and 19% than the Erlang capacity considering shadowing only, respectively. It is also shown that the effect of multipath fading must not be ignored and then exact Erlang capacity and equivalent channel numbers that the DS/CDMA cellular system can support are provided.d.d.d.

  • PDF

Optimized Channel Coding of Control Channels for Mobile Packet Communication

  • Song, Young-Joon
    • Journal of electromagnetic engineering and science
    • /
    • v.3 no.1
    • /
    • pp.50-56
    • /
    • 2003
  • This paper proposes a coding scheme of control channel for mobile packet communication to maximize the minimum Hamming distance, which is based on shifting of basis vectors of Reed Muller code with optimized dynamic puncturing and/or(partial) sequence repetition. Since the maximum likelihood decoding can be performed using the extremely simple FHT(Fast Hadamard Transformation), it is suitable for real time optimum decoding of control channel information with very little complexity. We show applications of the proposed coding method to TFCI(Transport Format Combination Indicator) code in split and normal modes of 3GPP W-CDMA system. We also discuss how this method can reduce rate indication error over AWGN(Additive White Gaussian Noise) as well as fading channels when the proposed coding scheme is applied to 1xEV-DV system of $3^{rd}$TEX> generation partnership project 2(3GPP2) to indicate the data rate transmitted on the reverse traffic channel by a Mobile Station(MS).

A Study on Electric Characteristics of Silicon Implanted p Channel Polycrystalline Silicon Thin Film Transistors Fabricated on High Temperature (고온에서 제조된 실리콘 주입 p채널 다결정 실리콘 박막 트랜지스터의 전기 특성 변화 연구)

  • Lee, Jin-Min
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.5
    • /
    • pp.364-369
    • /
    • 2011
  • Analyzing electrical degradation of polycrystalline silicon transistor to applicable at several environment is very important issue. In this research, after fabricating p channel poly crystalline silicon TFT (thin film transistor) electrical characteristics were compare and analized that changed by gate bias with first measurement. As a result on and off current was reduced by variation of gate bias and especially re duce ratio of off current was reduced by $7.1{\times}10^1$. On/off current ratio, threshold voltage and electron mobility increased. Also, when channel length gets shorter on/off current ratio was increased more and thresh old voltage increased less. It was cause due to electron trap and de-trap to gate silicon oxide by variation of gate bias.

Nonlinearity Detection and Compensation in Radio over Fiber Systems Using a Monitoring Channel

  • Kim, Sung-Man
    • Journal of information and communication convergence engineering
    • /
    • v.13 no.3
    • /
    • pp.167-171
    • /
    • 2015
  • A radio over fiber (RoF) system is a kind of analog optical transmission system and considered as a strong candidate for the next-generation fronthaul link in the future mobile network. In RoF systems, nonlinearity compensation is essential to increase the link capacity. In this paper, we propose a nonlinearity detection and compensation scheme using a monitoring channel in RoF systems. A monitoring channel is added at the transmitter site and used for transmitting a reference signal in an RoF transmission. The nonlinearity in the RoF transmission is detected by comparing the received monitoring signal and the original reference signal at the receiver site. Finally, the nonlinearity is compensated at the receiver by giving the reverse function of the detected nonlinearity. Our results show that the proposed scheme can almost remove the error vector magnitude degradation induced by the nonlinearity in the RoF system.

Current Saturation Improvement of Poly-Si TFTs for Analog Circuit Integration

  • Nam, Woo-Jin;Han, Sang-Myeon;Lee, Hye-Jin;Han, Min-Koo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2005.07a
    • /
    • pp.289-292
    • /
    • 2005
  • New poly-Si TFTs have been proposed and fabricated in order to increases the output channel resistance ($r_o$). The counter-doped($p^+$) source is tied to the $n^+$ source and is extended into the channel region so that it employs the reverse bias depletion in the channel. As $V_{DS}$ is increased, the depletion width is increased and the effective channel width is reduced. Therefore, the output current saturates well and the $r_o$ is increased successfully. The proposed CMOS devices may improve the amplifier gain of data driver in active-matrix displays

  • PDF