• PNF and Movement
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2009

This research measures the conditions of spinal scoliosis of college students and analyses the factors that affect spinal scoliosis. From September 15, 2008 to October 30, 2008, the study was conducted with 142 C College students and measured the degrees of spinal scoliosis. The analysis was evaluated according to the Pneumex Analysis program. The collected data was compiled into statistics using the SPSS PC+ 12.0 program. The results were as follows: 1. It appeared that in the cases of C curve, reverse C curve, S curve, and the normal, there was a statistical significance(p=.010) between the conditions of spinal scoliosis of the two genders. 2. It appeared that the comparison among the three groups according to the characteristics of the subjects showed a statistical significance in spinal length(p=.000) in the C curve group, age(p=.019) and spinal length(p=.004) in the reverse C curve group, and spinal length (p=.035), difference in apparent leg length(p=.019), and difference in true leg length(p=.012) in the S curve group. 3. It appeared that in the normal group without spinal scoliosis, the results of comparing the differences in apparent true leg length and spinal length according to the characteristics of the subjects showed a statistical significance in spinal length and gender(p=.000), age (p=.008), height(p=.000), and whether or not there was a regular exercise over once per week(p=.001). 4. On the correlations between C curve, reverse C curve, and S curve and differences in apparent true leg length and spinal length, it appeared that: (a) As the difference in apparent leg length gets bigger the difference in true leg length gets big in C curve(r=.551, p=.000). (b) As the difference in apparent leg length gets bigger the difference in true leg length gets big in reverse C curve(r=.511, p=.006). (c) There is no correlation in S curve.

• Research in Community and Public Health Nursing
• /
• v.8 no.2
• /
• pp.289-303
• /
• 1997

This study analyzes the relations between perceived family characteristics, experienced abuse and mental health in childhood. For this, this study used row data by questionnaire, analysis, and frequency, ANOVA, t - Test, Pearson' correlation analysis. The sample was 118 children 10-12 years old in primary school. The findings are as follows. First, children perceived family cohesion and family adaptability highly, family adaptability showed a significant difference from the relations with a parent's job, a parent's academic level, and type of residence. Second, it appeared that some children experienced physical, emotional, and sexual abuse. Third, in general the mental health of children was good. Their mental health showed a significant relation to economic level of family, and type of residence, creating problems such as depression, anxiety, phobic anxiety, psychoticism. By family size, their mental health showed a significant relation to somatization, interpersonal sensitivity, depression, hostility, phobic anxiety, paranoid ideation, and psychoticism, Fourth, family cohesion and mental health perceived by children supported a linear relation to phobic anxiety, and family adaptability and mental health perceived by children supported the reverse -linear relation to somatization, anxiety, paranoid ideation, etc. Fifth, connections with perceived abuse and mental health as well as emotional abuse and mental health were also supported. Further more, on somatization, interpersonal sensitivity, depression, hostility, phobic anxiety, paranoid ideation, psychoticism, etc, a reverse-linear re lation existed. Physical abuse supported a reverse-linear relation with interpersonal sensitivity, depression, paranoid ideation, etc. and sexual abuse supported a reverse-linear relation with depression. These findings suggest that school and family have to concern themselves with the mental health of children because experienced abuse and family characteristics do indeed affect the mental health of children.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.303-308
• /
• 2011

The present study has been carried out to predict the heat transfer characteristics of reverse heat loss method for a residential refrigerator by using numerical analysis and corresponding experiment. From the measured values of temperature and heat input, one can conclude that, the temperature inside the refrigerator has a nearly linear relationship with heat input. The effect of gasket heat loss was examined with the change of thermal conductivity of gasket region. The appropriate thermal conductivity of gasket region was acquired from the comparison of heat losses with the experimental result and numerical analysis. The result of calculated heat losses had accuracy within 1.8% error with the experimental result. With the selected thermal conductivity of gasket region, the effectiveness of reverse heat loss method was examined with the change of thermal conductivity of vacuum insulation panel.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.183-187
• /
• 1989

The bacteriophage Mu and transposon Tn5 containing plasmid pJB4JI-transferred transposon Tn5 to Caulobuter crescentus. When several thousand of transposon Tn5 insertion mutants were examined, we found auxotrophic and motility mutants at frequencies of 2％ and 3％, respectively. Transposition of transposon Tn5 was analyzed by the reverse field electrophoresis and Southern hybridization. The results indicated that transposon Tn5 was randomly inserted to Caulobuter crescentus chromosome but the plasmid vector, pJB4JI, was not maintained.

• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.151-155
• /
• 2009

Micro-scale copper bumps for build-up PCB were electroplated using a pulse-reverse method. The effects of the current density, pulse-reverse ratio and brightener concentration of the electroplating process were investigated and optimized for suitable performance. The electroplated micro-bumps were characterized using various analytical tools, including an optical microscope, a scanning electron microscope and an atomic force microscope. Surface analysis results showed that the electroplating uniformity was viable in a current density range of 1.4-3.0 A/$dm^2$ at a pulse-reverse ratio of 1. To investigate the brightener concentration on the electroplating properties, the current density value was fixed at 3.0 A/$dm^2$ as a dense microstructure was achieved at this current density. The brightener concentration was varied from 0.05 to 0.3 ml/L to study the effect of the concentration. The optimum concentration for micro-bump electroplating was found to be 0.05 ml/L based on the examination of the electroplating properties of the bump shape, roughness and grain size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.640-645
• /
• 2012

DC-DC converter and DC-AC inverter in a hybrid electric vehicle (HEV) generate the switching noise. It may be generated by the reverse recovery operation of the power diode in the switching circuit of the converter or the inverter. The shape of the reverse recovery region may be determined by both reverse time and recovery time in the diode. So, in this paper, the frequency spectrum of switching noise was estimated by the shape of the reverse recovery region and compared with the measured results. It shows that the meaningful region of the frequency spectrum is directly related with the reverse time.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2019

Reverse engineering involves examining a system or component so as to comprehend its structure, functionality, and operation. Creation of a system model in reverse engineering can serve several purposes: test generation, change impact analysis, and the creation of a new or modified system. When attempting to reverse engineering a system, often the most readily accessible information is the system description, which does not readily lend itself to use in Model Based System Engineering (MBSE). Therefore, it is necessary to be able to transform this description into a diagram, which clearly depicts the behavior of the system as well as the interaction between components. This study demonstrates how sequence diagrams can be extracted from the systems description. Using MBSE software, the sequence diagrams for the Engineered Safety Features Component Control System (ESF-CCS) of the Nuclear Power Plant are created. Sequence diagrams are chosen because they are a means of representing the systems behavior and the interaction between components. In addition, from these diagrams, the system's functional requirements can be elicited. These diagrams then serve as the baseline of the reverse engineering process and multiple system views are subsequently be created from them, thus speeding up the development process. In addition, the use of MBSE ensures that any additional information obtained from auxiliary sources can then be input into the system model, ensuring data consistency.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1055-1062
• /
• 2022

In this study, the mechanical properties of 80% cold-rolled austenitic 316L stainless steel were evaluated using specimens subjected to reverse transformation at 500-750℃ for 20 minutes and reverse transformation at 700℃ for 2-60 minutes. Also, for the elastic wave obtained from the tensile test, the dominant frequency according to the reverse transformation condition was investigated by time-frequency analysis. The SEM image of the 80% cold-rolled material was transformed into martensite and showed line and cross shapes. The TEM image showed that line shapes were shown at the grain, and grain boundary of martensite. The higher the heat treatment temperature and the longer time, the larger the grain. Tensile strength decreased as the heat treatment temperature and time increased, but elongation increased. Hardness was proportional to tensile strength. This is because the grain with different directions showed the same direction due to reverse transformation. The dominant frequency was decreased and then increased as the temperature and time increased. This is because the direction of the grain is different at a low temperature and the same direction is shown at a high temperature.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.4
• /
• pp.12-17
• /
• 2017

Design of Reverse Stirling Cycle based refrigerator can be predicted by Schmidt theory as a useful tool and by experiment it is found that for practical purposes the power and efficiency predicted by this analysis are about 35% of the actual values. Therefore, appropriate provision is to be made for getting the realistic result with the minimum deviation. The present paper first investigates the suitability of application of Schmidt design analysis for standard ZIF-1002 and PLN-106 Single cylinder Cryogenerator model. As the result is found to be optimistic, the same design procedure is applied for the design of a separate Cryogenerator for generating a cooling effect which is sufficient to produce 7 kg per hour liquid nitrogen using an indigenous condenser of 80% effectiveness. The paper describes all the details of the design methodologies and relevant results are found to be satisfactory.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.178-190
• /
• 1998

We have developed a planar impact model with a capability of reverse calculation to reconstruct various types of automobile collisions. This topic is the main part of what is referred to as accident reconstruction. The model uses the principle of impulse and momentum, and introduces a restitution coefficient and an impulse ratio at the impact center. Based on the car-to-car collision test results, we present how to estimate the restitution coefficient and the impulse ratio from some impact conditions. To validate the model and improve its reliability in accident analysis, the collision analysis has been performer with the estimated parameters. The analysis and experimental results agree well in the kinetic energy loss and the post-impact velocity.