• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.900-913
• /
• 2006

• Korean Journal of Materials Research
• /
• v.17 no.1
• /
• pp.56-59
• /
• 2007

Recently, requirement for the ultra thin copper foil increases with smaller and miniaturized electronic components. In this study, we evaluated the surface morphology, crystal phase ana surface roughness of the copper film electrodeposited by pulse method without using additives. Homogeneous and dense copper crystals were formed on the titanium substrate, and the optimum condition was 25% duty cycle. Moreover, the surface roughness(Ra), $0.295{\mu}m$, is the smallest value in this condition. It is thought that this copper foil is good for electromigration inhibition due to the preferential crystal growth of Cu (111)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.133-134
• /
• 2019

As information and construction technology increases, the demand for sophisticated geometric design grows. Design of buildings is becoming more larger, higher, and complicated every day, requiring much new construction technology to bring the design into reality. Nonetheless, the speed of construction technology development is not as rapid. This study concerns the difficulties of realization of sophisticated geometric design. It aims to suggest using BIM and precision survey equipment during the construction stage of the project is a way to resolve. The study will list how to use BIM as an engineering platform incorporating a photo scanner, a scanner drone, and a 3D scanner in the construction stage of projects, how these progressive projects were able to benefit from the high-construction technology.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.16-22
• /
• 2016

This study is a structural analysis of 3" Cryogenic Safety Breakaway Coupling using a manufactured product from KLAW Company. Breakaway coupling is very important in the pipe system, especially when transporting fuel or gas in the pipeline. For the analysis of the patent infringement target, Dover and KLAW Company's technologies (US 08127785, EP 0764809) were analyzed. Finally, the flip-flap valve overlap was measured after combining the breakaway coupling through 3D modeling, and the valve overlap had a 0.7mm measurement value from the height gauge. The safety breakaway coupling consisted of a total of 62 pieces (body: 42, valve module: 21).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.9-15
• /
• 2017

This study represents basic research for the development of submerged pump technology applicable to transfer and storage of a cryogenic liquids. Its purpose is to secure baseline design data by applying reverse engineering to the process of developing a submerged cryogenic pump. The two-stage model included in the ARTICK Series LNG Submerged Pump produced by Vanzetti of Italy was selected for analysis for development of a localized product, and was disassembled for reverse engineering. The pump was disassembled after analyzing its processing/assembly characteristics such as shrinkage of fittings. In addition, the materials used in manufacturing of the main components were analyzed, and the ingredients were confirmed. As a result, a design drawing for each component required for product development was secured via foundational design, and a test product was manufactured by maximizing the application of appropriate domestic technologies.

• Fire Science and Engineering
• /
• v.25 no.5
• /
• pp.32-38
• /
• 2011

Amphibious possible, and good fuel economy, so as leisure and transport has increased the use of hovercraft. Fire started in Korea, the prevalence is increasing in demand as the trend has been increasing steadily. In this paper, the hovercraft's forward and backward direction can be controlled in order to free the reverse bucket control system was developed. Control due to development by promoting the flow of air and turn right, turn left and easy to reverse the life-saving and stable at high speed, etc. has made possible the operation of hovercraft. The controller for the stability and fast response Fuzzy-PID method was used. To prove the validity of the proposed controller in Matlab simulation and the actual delivery at the firehouse, built into a model for the demonstration test was performed.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.77-84
• /
• 1999

Most river quality problems are generated by pollutants which are discharged into the river as a consequence of human activities. And eutrophication occurs when water is over enriched with nutrients, principally nitrate and phosphate. Both these nutrients are found in many waste products, especially sewage even when the waste is treated. Eutrophication is concerned in lakes, but it also causes problems in river. Wide growth of Phytoplankton in rivers, leads to blockage of channels, but the main concern is deoxygenation because of the increase in plant life's demand for oxygen in revers. Fish, plant and animals die due to lack of oxygen. The increase of algae floating on the tops of water looks ugly and has attracted public attention and concern in recent years. One way of controlling eutrophication is to restrict the amount of waste carrying nitrate or phosphate from entering the water in the first place. another way is to remove it from the water after it has been entered. This study was carried out to investigate on the trophic state, nutrients and Chlorophyll-a concentration in the Han River. The results were as follows:1. Concentrations of total nitrogen were 2.208~9.221(5.133)mg/$\ell$2. Concentrations of total phosphate were 0.045~0.614(0.195)mg/$\ell$3. Chlorophyll-a concentration were $0.0-25.3(9.6)mg/m^3$.4. The correlation coefficient between T-P and Chlorophyll-a concentration was r=-0.856 at Sungsan sampling site.5. The correlation coefficient was r=-0.578~-0.767, between Paldang Dam outflow and Chlorophyll-a concentration at all sampling sites.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.7-12
• /
• 2004

Desalination system of revers osmosis(RO) membrane has been proven to be the most economical not only for the desalination of water containing salts, but also for the concentration of solute. RO membranes were traditionally made of inorganic polymers such. as cellulose acetate(CA), Polyamide(PA). To retain more minerals in deep ocean water, a new hybrid membrane composed of tourmaline film as organic material onto inorganic layer of CA polymer in asymmetric structure was developed for RO membrane process. The performance tests were carried out in the permeability of pure water and the rejection of NaCl solution to evaluate the adaptability for DOW desalination. The results of these basic tests show possibility to apply the new hybrid RO membrane for the desalination with function control.

• Membrane Journal
• /
• v.16 no.2
• /
• pp.106-114
• /
• 2006

This study is concerned with preparation of chlorine resistant (CR) thin layer composite (TFC) membranes. The novel method for making CR membranes from commercially available RO membranes is based on sol-gel condensation of trialkoxyalkylsilane derivatives. The silane coupling agents used in this study have different number of alkyl carbon chain group (methyltriethoxysilane; METES and octyltriethoxysilane; OCTES). The OCTES composite membranes have a significant tolerance to chlorine compared to commercial polyamide RO membrane or METES composite membranes. The surface properties of membranes were examined to explain a significant difference of chlorine tolerance between OCTES composite membrane and the other two membranes. In this study, we tried several surface analyses to explain difference of chlorine tolerance. The element composition results of surface analysis by EDX confirmed that both silane fixed on polyamide firmly, The surface roughness and contact angle results showed long chain alkyl group of OCTES enhancing hydrophobicity considerably than METES. The hydrophobicity plays an important role in chlorine resistance of membrane.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.491-498
• /
• 2001

IN this Paper we propose an encryption algorithm for security in data communication. this algorithm acts encryption operation after the compression of data in order to reduce the transmission time and storage an encryption key is generated by using a parameter. as soon as key value is generated the parameter is transmitted and key is recreated every 26 times of parameter changing. the random number which is a constituent unit of encryption key is stored in a table the table is reorganized when the key is generated 40 times in order to intensity the security of encryption key. the encryption of data is made through the operation process of the generated key and sour data and the decryption performs the revers operation of encryption after getting decryption key by searching the transmitted parameter. as this algorithm is performed lastly it is possible to be used in practice.