• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.215-222
• /
• 2013

The purpose of this study is to minimize fading fabrics of surgical gown by repeated severe laundering and sterilization condition. The study showed that the best conditions were reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions. In these conditions, color difference values(dE) were below 1.0 that means unrecognizable color change by repeated laundering and sterilization. If it treated with only laundering, reduction cleaning conditions may adjust over $80^{\circ}C$ alkaline solution. In conclusion, it is needed to select the high-washing fastness dye and reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions for removal unfixed dyes.

• 한국IT서비스학회지
• /
• 제8권3호
• /
• pp.145-157
• /
• 2009

As the software development cycles is getting shorter, the software reusability is emphasized accordingly. Specifically, the design reusability is being recognized as one of the most important factor to increase the software quality and productivity and make the maintenance cost down. Two essential abilities are needed to improve the design reusability. One is the identification of the reusable objects, and the other is the organization of the relationships among the objects. However, the existing methods using such as a grammatical analysis, a scenario matching and a unit of design problems(design pattern) have not been proposed proper principles to identify the reusable objects on the basis of the abstraction which is the core of the object-oriented concept. In this paper, we will offer the Two-Pass abstraction principle based in the abstraction concept.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.167-170
• /
• 2008

아음속과 초음속 영역에서 모두 비행하는 재사용 비행체의 추진기관인 TBCC(Turbine Based Combined Cycle)엔진의 성능 설계 기법에 대한 연구를 수행하였다. 이 엔진은 터보제트엔진과 램제트 엔진의 복합 사이클 엔진으로 구성되어 있으며, 비행 마하수 영역별로 터보제트엔진의 작동과 램제트 엔진의 작동 그리고 터보제트엔진과 램제트엔진이 동시 작동하는 구간으로 구성된다. TBCC엔진의 성능해석 기법을 제안하고, 개별 엔진의 성능 결과를 검증 하였으며, 가상의 비행 영역에서 TBCC엔진의 성능을 해석하였다.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.190-195
• /
• 2015

Here, we demonstrated a $Pb^{2+}$ detecting aptasensor using $Pb^{2+}$-sensitive DNAzyme-conjugated gold nanorods (GNRs). Fluorescent DNA substrates that were initially quenched by GNRs, are released in response to $Pb^{2+}$ ions to give a substantial fluorescence signal. The GNR-tethered DNAzyme is reusable at least three times with a LOD of 50 nM.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.43-48
• /
• 2020

It is considered that most of reusable pipe supports, which are used as formwork support posting at construction sites, do not meet the performance standard. Due to the use of reusable pipe supports that do not meet such performance standard the potential risk of collapse accident is increasing. Therefore, this study identifies the status of compliance with performance standard, and presents the requirements for improving quality control to prevent the collapse of pipe supports reused at the construction site. First, if the female thread of the product with no clearance and new support pin with the diameter of 12mm are replaced at the same time for use, it is considered that the performance will be improved. Second, as the quality performance during use can be improved in the case of larger thickness of inner diameter compared to the case of larger thickness of outer diameter, it is necessary to increase the inner pipe thickness greatly than the current thickness. Based on the results of this study, it is expected that the performance the reusable pipe support (V4) can be improved, if the diameter of the support pin is 12mm, the female thread has a small clearance, and the inner tube thickness is 2.3 ~ 2.7mm. In addition, it is considered that other performance improvement factors included in the study results could be used as important data for improving the performance of reusable pipe support.

• 한국추진공학회지
• /
• 제19권6호
• /
• pp.10-18
• /
• 2015

로켓 기반 공기흡입추진(RBCC : Rocket Based Combined Cycle) 엔진이 적용된 재사용 발사체의 요구 중량 및 성능을 분석하고 예측하였다. RBCC 엔진을 위해 개발한 엔진 모델과 비행체 궤적 모델을 통합하여 RBCC 기반 재사용 발사체의 궤적 및 성능계산 모델을 개발하였으며, 기존 논문의 결과와 비교함으로써 검증하였다. 개발된 모델과 기존 논문을 바탕으로 총 이륙중량 15톤의 재사용 발사체에 대한 무게분석과 엔진의 요구 조건을 도출하였으며, 엔진의 모드 전환 마하수 변화 등에 따른 비행체의 추진제 요구량 변화를 분석하였다.

• Korean Journal of Acupuncture
• /
• 제35권1호
• /
• pp.41-45
• /
• 2018

Objectives : To investigate minimum pressure by verifying changes in pressure due to bleeding amount during bloodletting-cupping therapy. Methods : (1) We compared adhesion performance of four different cupping cups of same size: two disposable cupping cups(A, B) and two reusable cupping cups(A, B) each were vacuumed three times and kept in place for 10 minutes. (2) We vacuumed two different sized disposable cupping cups(A), size.1(InnerDiameter 48.8 mm) and size.3(InnerDiameter 39.1 mm), twice each(-200 mmHg) on silicon plate. We injected water and air at regular intervals in cupping cups by using a syringe, and then measured change of pressure in cupping cups and pressure at the time of dropout. Results : (1) Pressure reduction was $4.75{\pm}2.78%$ on average in the order of 'Disposable[A]>reusable[B]>Disposable[B]>reusable[A]', so that pressure retention performance of disposable cups can't be regarded as inferior to that of reusable cups. (2) Pressure of disposable cupping B(size.1) decreased by an average of -40.08 mmHg per 5 ml of water. At -24.8 mmHg, when 22 ml of water has been injected, cup has come off. Pressure of disposable cupping B(size. 3) decreased by an average of -99.4 mmHg per 5 ml of water. At -48.6 mmHg, when 13 ml of water was injected, cupping came off. Conclusions : Considering reduction rate of pressure due to water injection, in case of bleeding more than 15 ml, size.3 cup always comes off, therefore it needs to be re-operated at least once. Meanwhile, size.1 cup does not always come off in the same condition, depending on the initial pressure and therefore, re-operation may be considered.

• 소프트웨어공학소사이어티 논문지
• /
• 제24권3호
• /
• pp.101-110
• /
• 2011

웹 서비스(Web Service)는 SOAP, WSDL, UDDI 등의 표준화된 XML 메시지를 통해 네트워크 상에서 상이한 시스템간의 상호작용을 가능하게 하는 소프트웨어 시스템이다. 특히, UDDI는 서비스 제공자에 의한 서비스 등록과 서비스 요청자의 서비스 검색을 지원하는 레지스트리이다. 기존의 UDDI연구는 서비스의 단순 검색과 등록에 관한 연구로, 서비스 검색 향상에 관한 UDDI 연구나 컴포넌트 단위의 재사용성 향상을 위한 확장된 UDDI설계에 관한 연구를 제시하고 있다. 본 논문에서는 기존 UDDI의 서비스 등록과 검색 기능뿐만 아니라, 재사용을 위한 서비스 모델과 이를 위한 새로운 UDDI 자료구조와 API를 제안하며, 재사용을 위한 서비스 등록과 검색 기능을 제공하는 확장된UDDI를 설계 및 구현한다. 제시된 UDDI 시스템을 통해 서비스 개발자는 이미 개발된 서비스를 사용하여 서비스 애플리케이션을 개발함으로써 개발 비용 및 시간을 줄일 수 있으며, 검증된 서비스를 재사용함으로써 품질도 보장할 수 있을 것으로 기대된다.

• 한국산업보건학회지
• /
• 제32권1호
• /
• pp.53-63
• /
• 2022

Objectives: This study was designed to evaluate the filtration efficiency, inhalation resistance, and liquid resistance of commercial reusable masks in comparison to the performance of KF-AD masks (reference masks). Methods: Thirty-six masks were purchased from an online market. Filtration efficiency and inhalation resistance were determined in the same manner as in MFDS certification testing, respectively using TIL/IL & Filter Test 1300S (SFP Services, UK) and Breathing Resistance Analyzer DA2001 (Lambda Ray, South Korea). Results: Most of the filtration efficiencies found for the 19 masks were far lower than the test standard for KF-certified masks. Four masks met KF94 and three masks even met KF80. Most inhalation resistances were also much lower than the standard, with many almost one-half of the standard. In addition, all the masks except KF-AD masks did not pass the liquid resistance test. Conclusions: Although most of the filtration efficiency performance results found in this study for the reusable masks, which emerged as an alternative, were lower than the standard for health masks, multi-use masks can be used with a replacement filter inserted.

• 한국포장학회지
• /
• 제22권3호
• /
• pp.107-117
• /
• 2016

In order to reduce packaging and logistics costs for any business, it is important to identify opportunities for improvement throughout an entire logistics system including measurement of the performance and cost of packaging. Although the importance of packaging in a supply chain has been recognized by many scholars and experts, the total cost and value of packaging have not been successfully estimated. This paper reviews the recent researches and articles that tried to quantify the value of packaging focusing on the business decision between reusable and expendable shipping container systems. Three key factors such as cost, ownership, and standardization are identified and discussed in terms of impact on supply chain costs and performances. It is important to understand that the decision of a package system can change a logistics activities and even entire logistical system. Hence, the total cost and value of transport packaging should be calculated with understanding of interactions with logistical activities throughout supply chain. Identifying the opportunities and constraints of packaging changes on total logistics cost and activities must be carefully examined before implementation of a packaging system.