Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2020.35.3.43

A Experimental Study on Performance Improvement Factors of Used V4 Steel Pipe Support  

Choi, Myeongki (Korea Industrial Field Profess Group)
Park, Jongkeun (Department of Disaster Construction Safety, Daejeon Health Institute of Technology)
Publication Information
Journal of the Korean Society of Safety / v.35, no.3, 2020 , pp. 43-48 More about this Journal
Abstract
It is considered that most of reusable pipe supports, which are used as formwork support posting at construction sites, do not meet the performance standard. Due to the use of reusable pipe supports that do not meet such performance standard the potential risk of collapse accident is increasing. Therefore, this study identifies the status of compliance with performance standard, and presents the requirements for improving quality control to prevent the collapse of pipe supports reused at the construction site. First, if the female thread of the product with no clearance and new support pin with the diameter of 12mm are replaced at the same time for use, it is considered that the performance will be improved. Second, as the quality performance during use can be improved in the case of larger thickness of inner diameter compared to the case of larger thickness of outer diameter, it is necessary to increase the inner pipe thickness greatly than the current thickness. Based on the results of this study, it is expected that the performance the reusable pipe support (V4) can be improved, if the diameter of the support pin is 12mm, the female thread has a small clearance, and the inner tube thickness is 2.3 ~ 2.7mm. In addition, it is considered that other performance improvement factors included in the study results could be used as important data for improving the performance of reusable pipe support.
Keywords
used steel pipe support; performance improvement; steel pipe support;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 S. Paik and J. Park, "A Study on the Strength Comparison of Steel Pipe Support using the Structural Analysis Program", J. Korean Soc. Saf., Vol. 23, No. 4, pp. 67-71, 2008.
2 Y. Lee, "A Study on Buckling Characteristics of Pipe Supports", Incheon National University, p.1, 2014.
3 I. S. Choi and D. W. Seo, "Actual Status of Quality Control of Construction Materials: Focusing on Temporary Materials", Audit Report, pp. 3-8, 2016.
4 J. H. Hwang, S. T. Shin, S. M. Yun and H. H. Kim, "A Study for Evaluation of Performance and Influence Factors for Steel Pipe Support(I)", Journal of The Korea Concrete Institute, Vol. 16, No. 2, pp. 139-146, 2004.   DOI
5 B. H. Oh and B. J. Choi, "A Study on Improvement of Safety & Quality Management Standard Based on Compression Test of Steel Pipe Supports", J. Korean Soc. Saf., Vol. 33, No. 2, pp. 94-103, 2018.   DOI
6 M Choi and J. Park, "A Study on Quality Management Improvement of Used Pipe Support(V2)", J. Korean Soc. Saf., Vol. 34, No. 3, pp. 67-71, 2019.