• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.215-222
• /
• 2013

The purpose of this study is to minimize fading fabrics of surgical gown by repeated severe laundering and sterilization condition. The study showed that the best conditions were reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions. In these conditions, color difference values(dE) were below 1.0 that means unrecognizable color change by repeated laundering and sterilization. If it treated with only laundering, reduction cleaning conditions may adjust over $80^{\circ}C$ alkaline solution. In conclusion, it is needed to select the high-washing fastness dye and reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions for removal unfixed dyes.

• Journal of Information Technology Services
• /
• v.8 no.3
• /
• pp.145-157
• /
• 2009

As the software development cycles is getting shorter, the software reusability is emphasized accordingly. Specifically, the design reusability is being recognized as one of the most important factor to increase the software quality and productivity and make the maintenance cost down. Two essential abilities are needed to improve the design reusability. One is the identification of the reusable objects, and the other is the organization of the relationships among the objects. However, the existing methods using such as a grammatical analysis, a scenario matching and a unit of design problems(design pattern) have not been proposed proper principles to identify the reusable objects on the basis of the abstraction which is the core of the object-oriented concept. In this paper, we will offer the Two-Pass abstraction principle based in the abstraction concept.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.167-170
• /
• 2008

A TBCC(Turbine Based Combined Cycle) engine performance design method for reusable launch vehicles flying both in subsonic and supersonic regime was proposed. The TBCC consists of turbo jet engines and ramjet engines, operating individually or together according to operation schedule. The performance scheme of turbojet and ramjet was validated and the combined engine performance of the TBCC at a typical flight condition was analyzed.

• Applied Science and Convergence Technology
• /
• v.24 no.5
• /
• pp.190-195
• /
• 2015

Here, we demonstrated a $Pb^{2+}$ detecting aptasensor using $Pb^{2+}$-sensitive DNAzyme-conjugated gold nanorods (GNRs). Fluorescent DNA substrates that were initially quenched by GNRs, are released in response to $Pb^{2+}$ ions to give a substantial fluorescence signal. The GNR-tethered DNAzyme is reusable at least three times with a LOD of 50 nM.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.43-48
• /
• 2020

It is considered that most of reusable pipe supports, which are used as formwork support posting at construction sites, do not meet the performance standard. Due to the use of reusable pipe supports that do not meet such performance standard the potential risk of collapse accident is increasing. Therefore, this study identifies the status of compliance with performance standard, and presents the requirements for improving quality control to prevent the collapse of pipe supports reused at the construction site. First, if the female thread of the product with no clearance and new support pin with the diameter of 12mm are replaced at the same time for use, it is considered that the performance will be improved. Second, as the quality performance during use can be improved in the case of larger thickness of inner diameter compared to the case of larger thickness of outer diameter, it is necessary to increase the inner pipe thickness greatly than the current thickness. Based on the results of this study, it is expected that the performance the reusable pipe support (V4) can be improved, if the diameter of the support pin is 12mm, the female thread has a small clearance, and the inner tube thickness is 2.3 ~ 2.7mm. In addition, it is considered that other performance improvement factors included in the study results could be used as important data for improving the performance of reusable pipe support.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.10-18
• /
• 2015

Performance requirement analysis and weight estimation of a reusable launch vehicle with a rocket-based air-breathing engine(RBCC : Rocket Based Combined Cycle) were performed. Performance model for an RBCC engine was developed and integrated with flight trajectory model. The integrated engine-trajectory model was validated by comparing the results with those from previous research reference. Based on the new engine-trajectory model and previous research results, engine performance requirements were derived for an reusable launching vehicle with gross take-off weight of 15 tones. Dependence of the propellant amount requirement on the mode transition Mach number of the engine was also analyzed.

• Korean Journal of Acupuncture
• /
• v.35 no.1
• /
• pp.41-45
• /
• 2018

Objectives : To investigate minimum pressure by verifying changes in pressure due to bleeding amount during bloodletting-cupping therapy. Methods : (1) We compared adhesion performance of four different cupping cups of same size: two disposable cupping cups(A, B) and two reusable cupping cups(A, B) each were vacuumed three times and kept in place for 10 minutes. (2) We vacuumed two different sized disposable cupping cups(A), size.1(InnerDiameter 48.8 mm) and size.3(InnerDiameter 39.1 mm), twice each(-200 mmHg) on silicon plate. We injected water and air at regular intervals in cupping cups by using a syringe, and then measured change of pressure in cupping cups and pressure at the time of dropout. Results : (1) Pressure reduction was $4.75{\pm}2.78%$ on average in the order of 'Disposable[A]>reusable[B]>Disposable[B]>reusable[A]', so that pressure retention performance of disposable cups can't be regarded as inferior to that of reusable cups. (2) Pressure of disposable cupping B(size.1) decreased by an average of -40.08 mmHg per 5 ml of water. At -24.8 mmHg, when 22 ml of water has been injected, cup has come off. Pressure of disposable cupping B(size. 3) decreased by an average of -99.4 mmHg per 5 ml of water. At -48.6 mmHg, when 13 ml of water was injected, cupping came off. Conclusions : Considering reduction rate of pressure due to water injection, in case of bleeding more than 15 ml, size.3 cup always comes off, therefore it needs to be re-operated at least once. Meanwhile, size.1 cup does not always come off in the same condition, depending on the initial pressure and therefore, re-operation may be considered.

• Journal of Software Engineering Society
• /
• v.24 no.3
• /
• pp.101-110
• /
• 2011

Web Service which consists of SOAP, WSDL and UDDI is a software system that enables interactions of heterogeneous systems on networks with standardized XML message. Especially, UDDI is a registry for supporting the registration of a service by service publisher and discovery of a service by service requester. The preliminary studies are just about publishing and searching services. It presents the researches about UDDI study for improvement of searching a service and extended UDDI design for improvement of reusability with service components aspects. In this paper, we suggest not only features about publishing and searching services of existing UDDI system but also novel UDDI data structures and API for a reusable service model. In addition, we design and implement an extended UDDI system for publishing and finding the reusable services. Therefore, by using proposed UDDI systems, service developers reduce development costs and time through developing a service application reusing the already implemented services. In addition, it can expect to ensure the quality of services by reusing the proven services.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.53-63
• /
• 2022

Objectives: This study was designed to evaluate the filtration efficiency, inhalation resistance, and liquid resistance of commercial reusable masks in comparison to the performance of KF-AD masks (reference masks). Methods: Thirty-six masks were purchased from an online market. Filtration efficiency and inhalation resistance were determined in the same manner as in MFDS certification testing, respectively using TIL/IL & Filter Test 1300S (SFP Services, UK) and Breathing Resistance Analyzer DA2001 (Lambda Ray, South Korea). Results: Most of the filtration efficiencies found for the 19 masks were far lower than the test standard for KF-certified masks. Four masks met KF94 and three masks even met KF80. Most inhalation resistances were also much lower than the standard, with many almost one-half of the standard. In addition, all the masks except KF-AD masks did not pass the liquid resistance test. Conclusions: Although most of the filtration efficiency performance results found in this study for the reusable masks, which emerged as an alternative, were lower than the standard for health masks, multi-use masks can be used with a replacement filter inserted.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.107-117
• /
• 2016

In order to reduce packaging and logistics costs for any business, it is important to identify opportunities for improvement throughout an entire logistics system including measurement of the performance and cost of packaging. Although the importance of packaging in a supply chain has been recognized by many scholars and experts, the total cost and value of packaging have not been successfully estimated. This paper reviews the recent researches and articles that tried to quantify the value of packaging focusing on the business decision between reusable and expendable shipping container systems. Three key factors such as cost, ownership, and standardization are identified and discussed in terms of impact on supply chain costs and performances. It is important to understand that the decision of a package system can change a logistics activities and even entire logistical system. Hence, the total cost and value of transport packaging should be calculated with understanding of interactions with logistical activities throughout supply chain. Identifying the opportunities and constraints of packaging changes on total logistics cost and activities must be carefully examined before implementation of a packaging system.