• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.222-229
• /
• 2003

In this paper, we propose a delayed multiple copy retransmission (DMCR) scheme for data communication in wireless networks, by which multiple copies of a lost link layer frame are retransmitted one-by-one with a retransmission delay in between. The number of the copies gradually increases with the number of retransmissions. Furthermore, for implementation of the DMCR scheme in practical mobile communication system, we also propose a dynamic retransmission scheme by interleaving and a new round-robin scheduling algorithm. We compare our scheme with the previous non-delayed retransmission schemes on the performance of frame loss probability, channel capacity and total transmission time. Numerical results show that the DMCR scheme can achieve higher performance. The effect of the delay time on endto-end TCP throughput is investigated as well.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.36-44
• /
• 2005

In this paper, we present a retransmission power adjustment (RPA) scheme for DS/SSMA ALOHA packet radio systems with packet combining. In the proposed RPA scheme, retransmission power is adjusted in such a way that the erroneously-received packet can be recovered with a minimized interference to other user packets. We analyze the performance of the system with the RPA by employing the equilibrium point analysis (EPA), and confirm that the results obtained from the EPA are very close to the simulation results in low power cases. Simulation results demonstrate that the RPA scheme brings forth performance gain in the throughput and the average delay while saving a significant amount of transmission power. We also investigate the stability of the system from the EPA results, and conclude that the system becomes stable as the offered load increases or the level of retransmission power decreases.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.66-76
• /
• 2015

In this work, we propose an efficient selective retransmission method for multiple-input and multiple-output (MIMO) wireless systems under orthogonal frequency-division multiplexing (OFDM) signaling. A typical received OFDM frame may have some symbols in error, which results in a retransmission of the entire frame. Such a retransmission is often unnecessary, and to avoid this, we propose a method to selectively retransmit symbols that correspond to poor-quality subcarriers. We use the condition numbers of the subcarrier channel matrices of the MIMO-OFDM system as a quality measure. The proposed scheme is embedded in the modulation layer and is independent of conventional hybrid automatic repeat request (HARQ) methods. The receiver integrates the original OFDM and the punctured retransmitted OFDM signals for more reliable detection. The targeted retransmission results in fewer negative acknowledgements from conventional HARQ algorithms, which results in increasing bandwidth and power efficiency. We investigate the efficacy of the proposed method for optimal and suboptimal receivers. The simulation results demonstrate the efficacy of the proposed method on throughput for MIMO-OFDM systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.821-827
• /
• 2014

This paper considers a distributed telemetry system using retransmission algorithm with one master telemetry and two slave telemetries. The master telemetry merges data from each slave telemetry and own measured data. If there exist some errors in data from the slave telemetry, the master telemetry requests retransmission to corresponding slave telemetry. In this paper, we propose a retransmission algorithm applied to implementing the distributed telemetry system. Simulation results demonstrate that the retransmission improves the performance of the communication between the master and slave telemetries.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.931-936
• /
• 2004

We need to have an adaptive TCP protocol that can be tolerable on wireless network environement. TCP Westwood for use in the environe-ment that have a very high loss rate like a sattelite was proposed by modifying the existing bulk retransmission protocol. Bulk retransmission mechanism shows a highly enhanced performance on networks that have a very high loss rate but are prone to bursty loss networks. Also, it can exprience less performance on low late transmission environement. This paper proposes Adaptive Bulk Retransmission Mechanism that adjusts the number of bulk retransmitted packets based on the network conditions. The proposed mechanism was evaluated by using NS-2.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.3
• /
• pp.148-159
• /
• 2013

An analysis of the throughput and stability region of random access systems is currently of interest in research and industry. This study evaluated the performance of a multiuser random access channel with a retransmission gain. The channel was composed of a media access control (MAC) determined by the transmission probabilities and a multiuser communication channel characterized by the packet reception probabilities as functions of the number of packet transmissions and the collision status. The analysis began with an illustrative two-user channel, and was extended to a general multiuser channel. For the two-user channel, a sufficient condition was derived, under which the maximum throughput was achieved with a control-free MAC. For the channel with retransmission gain, the maximum steady throughput was obtained in a closed form. The condition under which the random access channel can acquire retransmission gain was also obtained. The stability region of the general random access channel was derived. These results include those of the well-known orthogonal channel, collision channel and slotted Aloha channel with packet reception as a special instance. The analytical and numerical results showed that exploiting the retransmission gain can increase the throughput significantly and expand the stability region of the random access channel. The analytical results predicted the performance in the simulations quite well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.98-106
• /
• 2005

We propose a new wireless fair queueing algorithm, WFQ-R (Wireless Fair Queueing with Retransmission), which is well matched with the LLR (Link Level Retransmission) algorithm and does not require channel prediction. In the WFQ-R algorithm, the share consumed by retransmission is regarded as a debt of the retransmitted flow to the other flows. Thus, the WFQ-R algorithm achieves wireless fairness with the LLR algorithm by penalizing flows that use wireless resources without permission under the MAC layer. Through simulations, we showed that our WFQ-R algorithm maintains fairness adaptively and maximizes system throughput. Furthermore, our WFQ-R algorithm is able to achieve flow separation and compensation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.2
• /
• pp.35-42
• /
• 2017

The TDD LTE MU-MIMO HARQ system is designed and implemented using GPU based on 3GPP Rel.10 standard. The system consists of the DU part of the base station and the terminal using the general computer based on the GeForce GTX TITAN graphics card provided by NIVIDIA, and constructed the part of the RU using USRP N210 provided by Ettus. In the implementation part, SDR standard is applied, so that various communication standards can be compatible with software. The retransmission is implemented by combining the previous data with the retransmission data using Chase Combining among HARQ methods. In order to confirm that the retransmission was successful, the performance evaluation used LLR constellation. First, if there is an error in the data, the LLR value is not distributed at the corresponding position. in this case, a retransmission is performed to chase combine the previously stored error data and retransmitted data. As a result, the LLR value was distributed at the position of the corresponding LLR value per bit. Through this, it can be confirmed that error - free data is formed by using Chase Combining after retransmission.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.313-322
• /
• 2016

This paper presents a method to improve the performance of Scalable Multicast Protocol deployed in wired and wireless network by adding retransmission function on base stations. When using Scalable Multicast Protocol over wireless and wired networks, packet drops on the wireless link produce the initiation of retransmission request packets and the implosion of retransmission packets, which deteriorate the multicast session performance. The efficient reliable multicast mechanism in wireless networks utilizing the retransmission function on the base station is addressed in this paper. We explain the design of a retransmission function which improves the performance of Scalable Multicast Protocol sessions in wireless and wirednetwork. The main idea is to cache Scalable Multicast Protocol packets at the base station and perform local retransmissions across the wireless link. ARENA has been used to simulate and to get performance for reducing signaling overhead and processing delay through the comparison of the proposed function to the Scalable Multicast Protocol.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.957-965
• /
• 1999

그룹간 공동 작업이나 화상 회의와 같은 그룹 통신의 수요가 늘어나면서 멀티캐스팅을 이용한 효율적인 데이타 전송에 대한 요구가 증가하고 있다. 특히 오디오나 비디오 데이타와는 달리 공동 문서 작업이나 그룹간 문서 전송을 위한 데이타 처리를 위해서는 어느 정도의 시간 손실이 있더라도 신뢰성을 보장할 수 있는 멀티캐스트 프로토콜이 요구된다. 그러나 멀티캐스트 전송에서의 신뢰성을 보장하기 위하여 손실 패킷에 대한 재전송 패킷이 전체 그룹으로 멀티캐스트 되는 것은 네트워크 상에 트래픽을 폭증시키는 요인이 된다. 이에 본 논문에서는 지역 그룹에서의 오류 회복을 위한 재전송 제한 기법을 제안하여 손실 패킷의 재전송 과정에서 발생하는 트래픽의 폭주를 제어하고자 한다. 이것은 재전송 패킷이 중복없이 다중 수신자에게 전송될 수 있도록 하여 그룹 내의 재전송 패킷의 양을 줄이고 필요없는 중복 패킷이 네트워크의 효율을 저하시키는 것을 방지하고자 하는 데 그 목적이 있다. Abstract As the size and the geographic span of communication groups increases, efficient data transmission schemes using Multicast service become more and more essential. Especially, unlike audio and video applications, for some collaborative applications and other data delivery components which require ordered and lossless delivery of data, Reliable Multicast Service is needed to ensure consistent presentation across multiple views. Thus error recovery by retransmission of loss data is provided in order to guarantee the reliability of multicast transmission protocol. However, redundant retransmission packets by multicast may cause traffic implosion on the Internet and it can be aggravated with continuous retransmission.This paper describes a Restricted Retransmission Mechanism as an error recovery method of multicast service in a local group, which can handle traffic implosion in retransmission process. It reduces redundant retransmission packets flowing into a local group and supports reliable multicast transmission. The goal of this mechanism is to reduce retransmission packets and decrease the load for group members and networks.