• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.61-70
• /
• 2000

This study was carried out to improve the tobacco field condition and to determine the effect of lime amount and application time on soil pH, yield, and quality of leaf tobacco. Lime was applied to the tobacco field by determined amounts according to different pH level. The changes of soil pH, growth of tobacco, yield, and quality of KF109 and Br21 tobacco were surveyed by time lapse. The target pH value in tobacco field soil can be reached at 6 weeks after lime application, and then the soil pH was lowered slightly after that time. The lime amount needed to reach target pH was decreased 40 % in the same tobacco field after 1 year. Though the initial growth rate of flue-cured tobacco in the field of pH 7.0 was lower than that of conventional tobacco field, the field of pH 7.0 showed the highest yield after the maximum growth stage. The quality of cured leaf tobacco in the field of pH 7.0 applied lime at spring season was slightly lowered compared with that in conventional. This results indicated that the best pH condition in tobacco field for the best tobacco growth was 6.5 and the proper time of lime application was fall season of previous year by application of the whole quantity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.676-681
• /
• 2000

This paper covers durability and field application of marine concrete which have been enhanced the resistance against deterioration in seawater. Fly ash concrete is applied to make the concrete with good durability. It is well known fly ash in concrete has a good performance preventing fro a sulphate attack and a steel corrosion. Several durability tests were performed to find characteristics of marine concrete which is proposed in this paper comparing with normal concrete. Field application was executed to compare results with laboratory test and to give a reliability to engineers. The project was supported by Ministry of Marine Affairs and Fisheries for two years.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.98-103
• /
• 2017

Purpose: Precision agriculture includes determining the right amount of nitrogen for a specific location in the field. This work focused on developing and validating a model using variable rate nitrogen application based on the estimated SPAD value from the ground-based image sensor. Methods: A variable rate N application based on the decision making system was performed using a sensor-based variable rate nitrogen application system. To validate the nitrogen application decision making system based on the SPAD values, the developed N recommendation was compared with another conventional N recommendation. Results: Sensor-based variable rate nitrogen application was performed. The nitrogen deficiency level was measured using the image sensor system. Then, a variable rate application was run using the decision model and real-ti me control. Conclusions: These results would be useful for nitrogen management of corn in the field. The developed nitrogen application decision making system worked well, when considering the SPAD value estimation.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.1
• /
• pp.34-45
• /
• 2010

This paper describes the design, manufacturing process, testing, application, and assessment of capacity-ratings of the first all advanced composites bridge on a public highway system. In order to verify the bridge design prior to the field application, a sub-scale bridge superstructure was built and tested in the laboratory. The field load test results were compared with those of the finite element analysis for the verification of validity. To investigate its in-service performance, field load testing and visual inspections were conducted under an actual service environment. The paper includes the presentation and discussion for advanced composites bridge capacity rating based on the stress modification coefficients obtained from the test results. The test result indicates that the advanced composites bridge has no structural problems and is structurally performing well in-service as expected. Since these composite materials are new to bridge applications, reliable data is not available for their in-service performance. The results may provide a baseline data for future field advanced composites bridge capacity rating assessments and also serve as part of a long-term performance of advanced composites bridge.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.77-85
• /
• 2018

PURPOSES : The purpose of this study was to develop an urgent road-repair system and perform a field applicability test, as well as discover the optimum mix design for machine applications compared to the optimum mix design for lab applications. METHODS : According to reviews of the patent and developed equipment, self-propelled and mix-in-place equipment types are suitable for urgent pavement repair, e.g., potholes and cracks. The machine-application mix design was revised based on the optimum lab-test mix design, and the field application of a spray-injection system was performed on the job site. The mixture from the machine application and lab application was subjected to a wet-track abrasion test and a wheel-tracking test to calibrate the machine application. RESULTS and CONCLUSIONS : This study showed that the binder content could differ for the lab application and the machine application in the same setting. Based on the wet-track abrasion test result, the binder contents of the machine application exceeded the binder contents of the lab application by 1-1.5% on the same setting value. Moreover, the maximum dynamic stability value for the machine application showed 1% lower binder contents than the maximum lab-application value. Collectively, the results of the two different tests showed that the different sizes and operating methods of the machine and lab applications could affect the mix designs. Further studies will be performed to verify the bonding strength and monitor the field application.

• Journal of Korean Society of Rural Planning
• /
• v.7 no.2 s.14
• /
• pp.3-11
• /
• 2001

A portable GPS receiver and a navigation software were used to investigate land application practices of manure composts. The field investigation indicated that most of the land application of manure composts were observed before April. Plowing for incorporation of manure with soil were continued from the middle of April. The results also revealed that over 60% of the farms were within 1 km from livestock farms from which manure composts were transported. Most of the farms having land application were dry field rather than paddies, Some of fields located near livestock farms frequently experience over-application of manure composts. It seems to have been difficult to complete the investigation in this study without the Gps/navigation system. The GPS/navigation system will become an essential tool in field investigations such as ecological/environmental monitoring works that require repeated observation at a number of sites.

• The Journal of Korean Medicine
• /
• v.38 no.1
• /
• pp.21-33
• /
• 2017

Objectives: The purpose of this study is to present the needs for New Health Technology in Korean medicine field and suggest the strategy to raise the application and selection rate. Methods: In this study, we reviewed the application status of New Health Technology application from April 27, 2007 to June 30, 2016. And we analyzed the assessment methods, procedures, and failure factors through the two Research stage technologies reports in Korean medicine field. Results: In Korean medicine field, the application status of New Health Technology is very small as 2% of the whole applications. Moreover, 62.9% of the applied technology were either an existing technology or an early technology, so did not enter the assessment process. Two technologies categorized as Research stage technology also had failed to adopt New Health Technology because they were lacking evidences or need more research to prove effectiveness. Conclusions: In order to develop New Health Technology in Korean medicine, more efforts should be made to activate research that can prove the safety and effectiveness of medical technology, and to create a quantitative or qualitative basis for the results of the research. Also, it is necessary to increase researchers' awareness of New Health Technology. And the strategy to positively utilize the "Limited Approval" to promote clinical studies.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.145-148
• /
• 1992

This paper reports the application of field tests to weak ground. In this study, field and laboratory tests were performed in the west seashore of KOREA(Ildo, Sore, Kunsan, Youngam). Applied tests are standard penetration test, cone penetration test, dilatometer test, field vane test, unconsolidated undrained test, oedometer test and other fundametal material properties tests. The results of in-situ test are used to estimate soil types and undrained shear strengths of five clay local deposits. SPT results showed low reliability and FVT war also demonstrated the best field test to weak clayey deposits.

• Tribology and Lubricants
• /
• v.36 no.5
• /
• pp.274-278
• /
• 2020

This study investigates the possibility of reducing squeal noise generated at the contact point between an elastomer and glass by using the properties of a magneto-rheological elastomer (MRE) whose stiffness changes with the application of a magnetic field. Previously, squeal noise was mainly observed in the unstable section caused by the weakening of friction due to velocity. Previous studies have shown that squeal noise decreases as the stiffness increases. Accordingly, this study is conducted to control the unstable area of the friction curve and to reduce the noise by inducing the stiffness change of the MRE by applying a magnetic field. The friction, vibration, and noise characteristics are measured using a reciprocating friction tester. The frequency ranges of vibration and noise measured with the accelerometer and sound sensor show similar results. When a magnetic field is applied to the MRE, there is significantly lower noise compared with the case without the application of the magnetic field. The average coefficient of friction decreases with the application of the magnetic field. The maximum coefficient of friction increases rapidly at the turning point and decreases when the magnetic field is applied. This shows that the mechanical properties of the MRE change due to the magnetic field, and the noise and friction coefficient also decrease.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1426-1430
• /
• 2018

High magnetic field effects on the microstructure and magnetic properties of $BaFe_{12}O_{19}$ hexaferrites synthesized hydrothermal method have been investigated. The obtained results indicate that the lattice constant decreases gradually as the magnetic field strength increases, which may be attributed to the lattice distortion resulted from the high magnetic field. Polycrystalline $BaFe_{12}O_{19}$ samples prepared under magnetic field strength at zero and 5 T are single phase. It is found that application of external magnetic field during synthesis can induce orientated growth of the hexaferrite crystals along the easy magnetic axis. The magnetic properties can be effectively regulated by an application of high magnetic fields. It is observed that the $BaFe_{12}O_{19}$ prepared under a 5 T magnetic field exhibits a higher room-temperature saturation magnetization (66.3 emu/g) than that of the sample (43.6 emu/g) obtained without magnetic field. The results can be explained as the enhanced crystalline, improvement of $Fe^{3+}$ ions occupancy and the oriented growth induced by the external magnetic field. The growing orientation of particles gives rise to increased coercivity due to the enhancement in shape anisotropy. It is expected that an application of magnetic field during the formation of magnetic nanoparticles could be a promising technique to modify magnetic properties with excellent performance.