• KIEAE Journal
• /
• v.15 no.4
• /
• pp.37-43
• /
• 2015

Purpose : The study applied control strategy to reduce through optimal control and operation of pump by applying control on variable speed to the circulation pump of HVAC system in the office building. The study has the purpose to review validity of control on variable speed as ESMs(Energy Saving Measures) and establish the control technology on variable speed pump. The study performed reduction analysis of building energy and economic evaluation of pump through energy effectiveness control strategy of HVAC system. Method: The study sought possible reduction through energy control strategy which can provide proper flow fitting to building load by applying control on variable speed pump. The study applied control strategy to reduce through pressure differential set-point control and operation of pump by applying control on variable speed to the circulation pump of HVAC system in the office building. Result : The results showed that about 16-35% of pump energy could be saved by using these optimal control strategies. In the result of analysis on 10 years life cycle cost of analysis on payback period of initial investment pump, variable speed pump control showed 5.1 years.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.92-96
• /
• 2004

In this paper, polishing method using bonded magnetic abrasive particle has been applied to the micro mold polishing. Through process control using the Run-to-Run control, it tried to form the surface roughness In order to grasp the influence of the surface roughness which is reached by selection of control factor and the factor, a design of experiment was been processed. The study is processed with a purpose of to embody and to maintain the surface roughness of nano scale by the basis of an influence between a control factor and the factors which has been selected in this way. As a result, the result of the process control converged at a target value of surface roughness Ra 10nm and Rmax 50nm

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.449-454
• /
• 1994

This paper describes new PID control methods based on the fuzzy logic. PID gains are retuned after evaluating control performances of transient responses in terms of performance features. The retuning procedure is based on fuzzy rules and reasoning accumulated from the knowledge of experts on PID gain scheduling. For the case that the retuned PID gains result in worse CLDR (characteristics of load disturbance rejection) than the initial gains, an on-line tuning scheme of the set-point weighting parameter is, proposed. This is based on the fact that the set-point weighting method efficiently reduce either overshoot or undershoot without any degradation of CLDR. The set-point weighting parameter is adjusted at each sampling instant by the fuzzy rules and reasoning. As a result, better control performances were achived in comparison with die controllers tuned by the Z-N (Ziegler-Nichols) parameter tuning formula or by the fixed set-point weighting parameter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.376-380
• /
• 2008

This paper deals with a performance analysis of real-time control systems, which engages DMR(dual modular redundancy) to detect transient errors and checkpointing technique to tolerate transient errors. Transient errors are caused by transient faults and the most significant type of errors in reliable computer systems. Transient faults are assumed to occur according to a Poisson process and to be detected by a dual modular redundant structure. In addition, an equidistant checkpointing strategy is considered. The probability of the successful task completion in a real-time control system where periodic checkpointing operations are performed during the execution of a real-time control task is derived. Numerical examples show how checkpoiniting scheme influences the probability of task completion. In addition, the result of the analysis is compared with the simulation result.

• Asia pacific journal of information systems
• /
• v.15 no.1
• /
• pp.25-44
• /
• 2005

This study examines control types of IS outsourcing project management focusing on two sets of questions: What control types are implemented during IS outsourcing projects? How various control types affect the performance of IS outsourcing projects. In order to meet these objectives, four control types are developed using typology-approach: dynamic, contract-oriented, partnership-oriented, and passive. And then four control types are identified based on taxonomy-approach using cluster analysis from 66 projects: dynamic, contract-oriented, passive, and middle. The result shows that the derived taxonomy-types are similar to the typology-types except partnership-oriented type. The result also indicates that dynamic and contract-oriented types are in the highest performance, while passive type is in the least performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.457-462
• /
• 2006

This paper is concerned with the active vibration control experiment on cylindrical shell equipped with Macro Fiber Composite(MFC) actuators. The MFC actuators were glued to the cylindrical shell in circumferential directions. To verify the theoretical result, vibration test using impact hammer and accelerometer was carried out. It was found from experiments that theoretical result predicts experimental result to some extent. The positive position feedback controllers were designed and applied to the test article. It was observed that the resonant amplitude of the fundamental mode was reduced by 20dB thus achieving active vibration control. The active vibration control of the response subject to non resonant excitation has been of interest. We developed the combination of the positive position feedback controller which can cope with the fundamental mode and the positive position feedback controller which can counteract the external disturbance with non resonant frequency. It was found from experiments that the hybrid controller can suppress the vibration amplitude successfully.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1064-1067
• /
• 1996

This paper describes the design and implementation of an intelligent controller for continuous casting process. The proposed controller adopted a fuzzy control with feedback linearization. The simulation result shows that proposed intelligent controller is superior to the conventional PID controller.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.115-119
• /
• 2004

The effect of a continuous blowing or suction on an oscillating 2-D NACA0012 airfoil was investigated numerically for the dynamic stall control. The influence of control parameter variation was also studied in the view point of aerodynamic characteristics. The result showed that the blowing control kept a higher lift drag ratio before stall angle but the dynamic stall angle was not exceed to without control result. As the slot position was closer to leading edge, the positive control effect becomes greater. The stronger jet and the smaller jet angel made more favorable roles on the control performance. In the cases of the suction, the overall control features were similar to those of the blowing, but dynamic stall angle was increased, i.e. suction was more effective to control dynamic stall. It was also founded that the suction control was showed better control effect as the slot position moves to trail edge within thirty percentage of chord length. In the simulation for the jet strength and the jet angle control, the same tendencies were observed to those of blowing cases.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.1
• /
• pp.89-97
• /
• 2017

This study examined the structural relationship between life stress perceived by university students and their gambling behaviors through their self-control and family support. For this, it conducted the questionnaire on life stress, self-control, family support and gambling behavior with 387 university students attending universities in Gwangju city and analyzed the data collected. The results of the analysis were described below. As a result of analyzing the direct effects of life stress on gambling behavior, self-control and family support, it was found that the life stress had the positive effect on gambling behavior and it meant that when the university students couldn't cope with the life stress effectively and felt frustrated, they were likely to be involved in gambling behavior to escape from their helplessness. In addition, as a result of analyzing the direct effects of life stress on self-control and family support, it was found that life stress had negative effect on self-control and family support. The more experiences of life stress they had, the lower their self-control was. As their life stress was higher, they didn't make supportive relationship network with family members. As a result of mediating effects, it was shown that self-control and family support played the partially negative roles in the relationship between life stress and gambling behavior and it suggested that as the life stress was perceived less, self-control was performed better and as family support was higher, gambling behavior was effectively reduced. These results of the research suggested that life stress could be handled actively through self-control and family support and development and distribution of the program to cope with life stress could minimize the gambling behaviors. Also the limitations of this study and necessity of further studies were discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.783-787
• /
• 1993

The dynamics for a two-body problem including perturbations due to nonspherical gravitation of the earth, gravitation of the sun and moon, radiation of the sun is studied. Orbit determination was performed by SVD filter. The simulation result shows that the characteristics of the satellite orbit have east-west and south-north drift. Therefore, the periodic magnitude of the control time and value in the view of the periodicity of error can be provided, and this result can be basic data to a station keeping problem with an orbit determination result.