• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.2
• /
• pp.87-95
• /
• 2004

For the slope stability and revegetation of retaining wall, Eco-Stone was built beside a newly constructed road in August, 2002. Eco-Stone blocks were constructed in 4 different combinations of irrigation and soil types. Within the Eco-Stone, planted were 6 species such as Forsythia koreana, Rhododendron mucronulatum, Spiraea prunifolia var. simpliciflora, Rhododendron sp. Euonymus japonica, and Aster koraiensis. Shoot growth was greater on common soils than at a better soil treatment for Forsythia koreana(P<0.01) and Spiraea prunifolia var. simpliciflora(P<0.05), while there were no significant differences for the other species. Biomass increment of the planted species also did not show significant differences between irrigation types, except Rhododendron sp. and Aster koraiensis of which biomass was higher under irrigation than at no irrigation for common soils. Most of the planted individuals were alive, showing survival ratio of 90~97% with no significant differences among treatment blocks. These results imply that the Eco-Stone can be used economically for slope stability and revegetation instead of concrete blocks, without a specific soil and irrigation requirement.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.14-22
• /
• 2008

The forest soil sediment disasters occurred in Jinbu-myeon Pyeongchang county were investigated characteristics by the aerial photograph analysis. After digitizing from aerial photographs, forest soil sediment disaster sites were classified into 695 collapsed sites, 305 flowed sites and 199 sediment sites. DEM (Digital Elevation Model) were generated from 1 : 5,000 digital topographic map. Factors of geography, hydrology, biology, and geology were analyzed using DEM, geologic map, and forest stand map with aerial photographs by GIS spatial analysis technique. The forest soil sediment disasters were mainly occurred from southeastern slope to southwestern slope. In collapsed sit es, the average slope degree is $28.9^{\circ}$, the average flow length is 163.5m, the average area of drainage basin is 897$m^2$. In case of flowed sites, the average slope degree, flow length, the area of drainage basin and confluence order is $27.0^{\circ}$, 175m, 2,500$m^2$ and 1, respectively. In sediment sites, the average slope, flow length, the area of drainage basin and confluence order is $12.5^{\circ}$, 2,50m, 25,000$m^2$ and 4, respectively. Also the forest soil sediment disasters were occurred most of collapsed sites in the afforest land after felling and igneous rocks composed of granite.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2004

It's a very meaningful experimental study to image restoration of ancient villages vanished at the real life spatial world. Focused on Cheung-Pyung Lake around where most part were flooded by the Chung-Ju large dam founded in early 1980s, we used remote sensing technique in this study in order to restore topographical features before the flood with 3 dimensional effects. It was gathered comparatively good satellite photos and remotely sensed digital images, then its made a new color image from these and the topographical map which had been made before filled water. This task was putting together two kinds of different timed images. And then, we generated DEM(digital elevation model) including the outskirts of that area as harmonizing current contour lines with the map. That could be a perfect 3D image of Cheung-Pyung around before when it had been flood by making perspective images from all directions, north, south, east and west, for showing there in three dimensions. Also, flying simulation we made for close visiting can bring us to experience their real space at that time.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.2
• /
• pp.115-126
• /
• 2021

Strategic Environmental Impact Assessment (SEA) is a decision-making process taking into account the environmental impact, economic and social impact of policies, plans, and programs at the higher stage prior to the project plan for promoting sustainable development. In this study, we analyzed the process and criteria for selecting appropriate alternatives when establishing development plan in SEA. First, the criteria for estimating changes in ecosystem services following the implementation of development project of industrial complex were presented. Second, alternative evaluations were conducted through an analysis of ecosystem service scenarios to explore suitable alternatives in Anseong. As a result, the environmental quality of selected area as the existing project site deteriorated according to the implementation of the project, and the dimensional reduction technique confirmed that the change in ecosystem service factors in project area was the optimal location. In addition, the results of the scenario assessment to explore suitable alternatives in Anseong City showed that the existing site had large capacity in terms of water quality control services (scenario 1), scenario 2 in terms of preconditioning services, and scenario 3 in terms of water supply services. The guidance of Ecosystem service assessment is expected to be available in decision-making of large-scale strategies (e.g., SEA) and projects by presenting more quantitative criteria for determining the adequacy and location feasibility of development plans and policy plans. This is expected to require various support, including legislation and revision of related laws, believed to be supported by advanced research.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.344-350
• /
• 2020

PURPOSE. Recently introduced hybrid and reinforced glass ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials have been used for full-coverage restorations. However; the effect of adjustment and type of materials on internal and marginal adaptation are unknown. This study aimed to evaluate and compare the marginal and internal adaptations of crowns made of three different CAD/CAM materials before and after adjustment. MATERIALS AND METHODS. One acrylic resin maxillary first molar was prepared and served as the master die. Thirty-six restorations were fabricated using CAD/CAM system (CEREC Omnicam, MCXL) with three materials including lithium disilicate (IPS e.max CAD), zirconia-reinforced lithium silicate (Suprinity), and hybrid ceramic (Enamic). Internal and marginal adaptations were evaluated with the reference point matching technique before and after adjustment. The data were analyzed using mixed ANOVA considering α=.05 as the significance level. RESULTS. The effect of adjustment and its interaction with the restoration material were significant for marginal, absolute marginal, and occlusal discrepancies (P<.05). Before adjustment, Suprinity had lower marginal discrepancies than IPS e.max CAD (P=.18) and Enamic (P=.021); though no significant differences existed after adjustment. CONCLUSION. Within the limitations of this study, crowns fabricated from IPS e.max CAD and Suprinity resulted in slightly better adaptation compared with Enamic crowns before adjustment. However, marginal, axial, and occlusal discrepancies were similar among all materials after the adjustment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.133-144
• /
• 2021

This study aims to estimate location of land mammals habitat by analyzing spatial data and investigate how to apply environmental DNA monitoring methodology to lotic system in Yangpyeong-gun, Gyeonggi-do. Environmental DNA sampling points are selected through spatial analysis with QGIS open source program by overlaying Kernel density of wild boar(Sus scrofa), elevation, slope and land-cover map, and 81 samples are collected. After 240 mL of water was filtered in each sample, metabarcoding technique using MiMammal universal primer was applied in order to get a whole list of mammal species whose DNA particles contained in filtered water. 8 and 22 samples showed DNA of wild boar and water deer, respectively. DNA of raccoon dog, Eurasian otter, and Siberian weasel are also detected through metabarcoding analysis. This study is valuable that conducted in outdoor lotic system. The study suggests a new wildlife monitoring methodology integrating overlayed geographic data and environmental DNA.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.5
• /
• pp.29-41
• /
• 2022

Alien species cause problems in various ecosystems, reduce biodiversity, and destroy ecosystems. Due to these problems, the problem of a management plan is increasing, and it is difficult to accurately identify each individual and calculate the number of individuals, especially when researching alien turtle species such as GPS and PIT based on capture. this study intends to conduct an individual recognition study using a UAV. Recently, UAVs can take various sensor-based photos and easily obtain high-definition image data at low altitudes. Therefore, based on previous studies, this study investigated five variables to be considered in UAV flights and produced a test paper using them. OCR was used to monitor the displayed turtles using the manufactured test paper, and this confirmed the recognition rate. As a result, the use of yellow numbers showed the highest recognition rate. In addition, the minimum threat distance was confirmed to be 3 to 6m, and turtles with a shell size of 6 to 8cm were also identified during the flight. Therefore, we tried to propose an object recognition methodology for turtle display text using OCR, and it is expected to be used as a new turtle monitoring technique.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.5
• /
• pp.77-88
• /
• 2022

This study aims to understand the relationship between the distribution of fish species in the two water ecosystems and the habitat factors according to the survey period targeting Gwanggyo Lake Park in the city. There are studies on the appearance and distribution of species by applying eDNA to freshwater ecosystems. However, in the domestic, streams are the target, and studies on the relationship between species distribution and habitat environment in two water environments are lacking. We conducted to analyze the species list and relationship with habitat factors using eDNA research in May and October at 21 points in Gwanggyo Lake Park, Suwon City, which were connected to lakes and streams. As a result, there was no species difference in the water environment according to the survey period. However, the total number of reads during the spawning season(May) was 3,126,482, which was more than double that after the spawning season(October). Tolerant species appeared in Woncheon Lake with a slow or stagnant flow, but there was no significant correlation between species and habitat factors depending on the survey period. On the other hand, intermediate and sensitive species appeared in the Woncheon stream with high flow. There was a significant correlation between the low temperature during the spawning season and the high dissolved oxygen content after the spawning season(P<0.001, Tem.: 20.7±2.6℃, DO: 8.6±1.7). It is expected that environmental DNA will be used to survey species and suggest monitoring methods according to the survey period.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.1
• /
• pp.17-33
• /
• 2023

Disasters in coastal regions are a constant source of damage due to their uncertainty and complexity, leading to the proposal of green infrastructure as a nature-based solution that incorporates the concept of resilience to address the limitations of traditional grey infrastructure. This study analyzed trends in research related to coastal disasters and green infrastructure by conducting a co-occurrence keyword analysis of 2,183 articles collected from the Web of Science (WoS). The analysis resulted in the classification of the literature into four clusters. Cluster 1 is related to coastal disasters and tsunamis, as well as predictive simulation techniques, and includes keywords such as surge, wave, tide, and modeling. Cluster 2 focuses on the social system damage caused by coastal disasters and theoretical concepts, with keywords such as population, community, and green infrastructure elements like habitat, wetland, salt marsh, coral reef, and mangrove. Cluster 3 deals with coastal disaster-related sea level rise and international issues, and includes keywords such as sea level rise (or change), floodplain, and DEM. Finally, cluster 4 covers coastal erosion and vulnerability, and GIS, with the theme of 'coastal vulnerability and spatial technique'. Keywords related to green infrastructure in cluster 2 have been continuously appearing since 2016, but their focus has been on the function and effect of each element. Based on this analysis, implications for planning and management processes using green infrastructure in response to coastal disasters have been derived. This study can serve as a valuable resource for future research and policy in responding to and managing various disasters in coastal regions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.869-876
• /
• 2006

In the case of earthenware cultural heritages that are found in the form of fragments, the major task is quick and precise restoration. The existing method, which follows the rule of trial and error, is not only greatly time consuming but also lacked precision. If this job could be done by three dimensional scanning, matching up pieces could be done with remarkable efficiency. In this study, the original earthenware was modeled through three-dimensional pattern scanning and photogrammetry, and each of the fragments were scanned and modeled. In order to obtain images from the photogrammetry, we calibrated and used a Canon EOS 1DS real size camera. We analyzed the relationship among the sections of the formed model, efficiently compounded them, and analyzed the errors through residual and color error map. Also, we built a web-based three-dimensional simulation environment centering around the users, for the virtual museum.