• 보존과학연구
• /
• s.30
• /
• pp.189-202
• /
• 2009

Ceramics from Taean shipwreck were studied to investigate the deterioration by soluble salts and desalination pattern according to each ceramic characterization. NaCl crystals were found as a crystal growth on the ceramic microstructure and deteriorated to push off the glaze layer of some Puncheong ware sample. As a result of monitoring the desalination pattern of ceramics for 74days, the earthenware sample with big pores and no glaze removed soluble salts so fast, but Puncheong ware and Whiteware samples removed lots of soluble salts slowly and continuously. Generally, it takes long time to remove soluble salts from porcelains, due to small pores and glaze, but the long-term desalination probably can cause the damage on the surface layer such like glaze. As some soluble salts still remains in the ceramic microstructures after desalination, it is very important to control and keep the relative humidity stable through the proper storage. There are various ceramic deterioration patterns by soluble salts. Therefore, it needs to select the desalination method of ceramics from shipwreck, considering the material characteristics and the production techniques.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.165-173
• /
• 2020

ABS and PLA are applied for restoring missing part of damaged ceramics, but are not similar to the material of ceramics, so this study conducted a research on the properties and applicability of ceramic resin. This study conducted actual restoration of ABS and ceramic resin as well as cast restoration method with experiment of properties. Results show that manufacturing of restored part showed higher precision than existing materials, which enables printing of tiny shapes showing excellent surface texture and gloss than L30 and ABS resin. As a result of measuring properties, the material showed excellent durability than existing materials with no contraction and deformation and compressive strength, but value of specific gravity and hardness can lower processability after manufacturing. Long-term monitoring, evaluation of reliability of ceramic resin applied in this study, additional researches on the restorability of the original shape when printing too thin or long restored part are needed.

• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.25-32
• /
• 2010

The yellowing is always occurred phenomena in epoxy restoration material of antic-ceramics. For re-restoration of remains with epoxy restoration material, the epoxy elimination step is the first one in all course of restoration In this paper, the chemically elimination treatments methods of epoxy in various antic-ceramics were discussed. We fabricated the epoxy elimination material for antic-ceramics restoration which were made up Dichloromethane and Dichlormethane based Dimethylformamide solution. Dichloromethane and Dichloromethane + Dimethylformamide mixture were applied to epoxy in various antic-ceramic sample. Particularly, Dichloromethane + Dimethylformamide solution had the best result in variation of color change, gloss, vending strength, weight, exfoliation time test after deposition in this solution. Dichloromrthane had the volume increase characteristics for epoxy material and Dimethylformamide had the mollification ones. So, Dichloromathane increased exfoliation in approximal surface of the epoxy material and antic ceramic, and Dimethylformamide decreased the surface hardness of epoxy. In this result, epoxy material even inside of ceramic that have very weak inside bonding is adaptable and stable eliminated. And in order to show the perfect elimination of this material, we successfully dissolve the epoxy restoration material in one antic pottery that is in one university museum's possession using this mixture. So, there is guarantee in the eternity and stabilization of restoration for antic-ceramics.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.441-450
• /
• 2011

This study investigated potential damages and conservation methods for the ceramics (without glaze) by examination of physical and chemical effects from the burial environments. For this study, pottery samples excavated from Daejeon Hakha, Asan Eumbong, Hwasung Sogeunsan and Kongju Haengbokdosi were examined with released ions and extraction through desalination. The result showed that the ion inflow into the ceramics was dependent upon the porosity and the absorption of ceramics. The high temperature fired ceramics (over $1,000^{\circ}C$) have low porosity and absorption, therefore almost no salt infiltration during the burial period. However, low temperature fired ceramics (under $800^{\circ}C$) have high porosity and absorption, and most of salts were removed during the desalination. The 40 to 60% of salts were removed in two days and 60 to 80% of slats were released in a week. Furthermore, fertilizer residues such as $K_2SO_4$, in soils were detected in the ceramcis. Also the characteristics of buried soil affected ion infiltration into ceramics. Ceramics buried in sandy soil had relatively less ion contents from buried environments than those in clayey soil. Therefore, low temperature fired ceramics could do not only cleaning but also desalination if it is necessary, and the period could be decided to the condition of ceramics.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.183-190
• /
• 2010

We fabricated urethane material based on properties of reversible and unfading for antic-ceramics restoration. This material with low viscosity was made hardness control possible that user want. And it have very strong adhesion and shear strength properties and is shown the best properties for pigment filling, anti-contractibility, coloring as like epoxy system materials. Particularly, the yellowing and ir-reversibility problem in epoxy restoration material were finally solved. So, there is guarantee in the eternity and stabilization of restoration for antic-celamics. And in order to show the reversible state of the restoration, we successfully dissolve this urethane materials in solvent after perfect restoring subsequently.

• Journal of Conservation Science
• /
• v.22
• /
• pp.109-120
• /
• 2008

Understanding the whole knowledge of ceramics is essential for a person in charge of conservation of ceramics since their methods of manufacturing or materialistic features have very close relationship with their damaging process. Also, various executions of repair and restoration dealing with any damage in use have to be looked into. The information attained through those studies finds damaging causes of ceramics, which becomes a critical element when choosing a proper conservation treatment method and utilizes as indispensable data for permanent preservation. As part of scrutinizing materials of repair and restoration, this study examines the purpose, date, and the constituents of the materials used in metal bound rims adhered to the brim of ceramics. Among the subjected ceramics, the metal bound rims possible to scientific analysis were gone through element analyses with Portable ${\bullet}\"{I}$-XRF Spectrometer and SEM-EDS while the ingredients of the ceramics difficult to analyze were inferred by eye inspection of exhibition catalogues. The results of this study confirm that metal bound rims consisted of diverse materials were adhered to the brim of ceramics.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.345-356
• /
• 2011

To remove metal stains of the ceramics, chemical cleaning is essential case by case. This study investigated the removal characteristics of iron stains by oxalic acid and citric acid including their application methods of soaking and poultice. The soaking method in cleaning agents showed removal process by color difference and released iron contents from iron stains on ceramics. Iron stains were removed successfully from ceramics, which soaked in oxalic acid for 60 hours. However, it is recommendable to soak in 0.25M oxalic acid for one to three hours because most iron stains were disappeared in 3 hours soaking. Citric acid is less effective than oxalic acid in removing iron stains because of heavy molecular weight and low acidity. Poultices (bentonite, sepiolite, activated carbon fiber and celite) with oxalic acid were applied on contaminated ceramics. After ten hours, iron stains on ceramics were removed successfully by poultice. Among them, bentonite and sepiolite have better application. Therefore, sepiolite with 0.25M oxalic acid was applied on the iron stains of whiteware and celadon from Ma Island, and then stains were removed. However, it is judged that the application methods can be varied according to the form and depth of contaminant. In addition, the residues of poultice on the ceramics will be considered for preventing contamination.

• Journal of Adhesion and Interface
• /
• v.14 no.3
• /
• pp.128-134
• /
• 2013

This study investigated the natural adhesives for ceramics conservation that can be used as a substitution for synthetic resins. Samples were prepared by mixing lacquer with animal glue and the structure and adhesion properties of the samples were analyzed. The structure analysis with FT-IR showed that carbonyl (C=O), amine (N-H) and aromatic (C=C) bonds are increased by adding animal glue on lacquer. Comparing to the viscosity and tensile strength of the sample to the Paraloid B-72 and Araldite rapid type, these natural adhesives can be a substitution for the synthetic resins. Through methodical and intensive study, we expect practical uses of this eco-friendly natural adhesives for ceramics conservation.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.421-435
• /
• 2013

The purpose of this study is to suggest environmental guidelines for the conservation of ceramics excavated from underwater. Accordingly, the conditional change of the soluble salt on surface of the excavated ceramics was examined by changing the relative humidity. Examining the relative ratio [high humidity(RH70%+RH80%)/low humidity(RH20%+ RH40%)] for 24 weeks using accumulated conductivity(${\mu}s/cm$), the result showed that the amount of ion elution increased more in high humidity than in low humidity. In particular, the ion elution increased significantly within the celadon sample. In addition, comparing the accumulated conductivity and physical characteristics of the samples in high humidity, the results indicated that the amount of the ion elution is proportioned to the increased rate of the sample's absorption capacity and porosity. Ceramics excavated from underwater has risks of the secondary physical and chemical attacks from remaining salts. Therefore, it is suggested these ceramics be stored in a storage which maintains proper temperature and low humidity conditions. Also, the collections need to be pre-classified according to the properties of the materials.