• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.25-37
• /
• 2019

The conventional representative underground cavity restoration methods, which are mainly open-cut methods, require high cost and long period of time for the restoration. Therefore, various trenchless restoration methods have been proposed to improve these disadvantages. The underground cavity restoration method using the expansive material proposed in this paper is one of the trenchless methods. This method fills the underground cavity with high quality backfill soils through the small hole(s) at asphalt layer and compacts backfill soils by insertion of the expansive material within the cavity. In this study, the restoration method using expansive material was constructed in acrylic chamber. The restoration efficiency of the method was analyzed by the fill ratio and degree of relative compaction according to the location and number of bore holes. As a result of the experiment, the restoration efficiency and the optimum construction location were found to be irrelevant.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.159_160
• /
• 2009

In this paper proposes a new algorithm of efficiency outage restoration using a outage load switching to a healthy MTR a fault occurrence at a MTR. In addtion, proposed algorithm includes a outage restoration method which keeps MTR optimal capacity with reorganization of distribution network in case it can not restore outage state loads caused by shortage of healthy MTR remain capacity. In case that proposed sequence still can not complete restoration, this paper suggests a efficiency outage restoration with objective function included priority in outage loads.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.3
• /
• pp.65-74
• /
• 2014

The aim of this study was to evaluate the monitoring efficiency of camera trapping in wild animals and to determine ways to increase its utilization. Nineteen sensor cameras were installed in Sobaeksan National Park from October 2012 to September 2013. During the study period, a total of 1045 terrestrial mammal photos were secured and 15 species habitats were identified. Shooting frequency was higher for medium and large mammals, especially full images of carnivores accounted for approximately 83%. A comparison of track surveys revealed that camera trapping was highly efficient and helped in capturing real image of species. The supply of lure and bait stimulates the sense of smell in carnivores, which further enhances the capturing of images by camera trapping. The results of this study provide data on the ecological characteristics of mammals, which can aid in determining habitat use by these animals, and thereby facilitate prevention of crop damage by wildlife.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.761-763
• /
• 1997

As the power system network is enlarged and complicated gradually, the automation of power system network is essential to enhance the reliability and performance of the operation of power system. Distribution restoration is a major part of the automation. This paper proposes a new distribution restoration system to restore healthy blackout regions by the hierarchical cooperation with the substation automation systems. In proposed system, the range of restoration is extended to substations and the performance as well as the switching efficiency of restoration system is enhanced.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1651-1657
• /
• 2009

In this paper, restoration solution algorithm to improve reliability better than restoration system of DAS(Distribution Automation System) is proposed in IDMS(Intelligent Distribution Management System). A strategy of IDMS restoration system to improve reliability and efficiency is proposed by analysis restoration system in DAS. Restoration sequence algorithm, distributed restoration solution algorithm considering a characteristic and a suitable restoration solution algorithm in IDMS are proposed. In the case study, algorithms have testified with example distribution network by C language

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.660-668
• /
• 2007

In order to improve the efficiency of service restoration function in the current Distribution Automation System (DAS), in this paper it is proposed a more advanced and efficient service restoration approach using Multi-Agent technique based on distributed networks. In the current DAS, communication networks or protocol structures are centralized with communications between the central station and FRTU through 1:1 connection. In order to maintain the current systems and enhance the proposed Multi-Agent based service restoration scheme, a device of communication and intelligence, named MASX, is newly developed to make a FRTU as an agent to cooperate each others. the proposed system applied in a demo system for an distribution automation system and shows 8 times reduction of restoration time in restoration of blackouts.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2107-2114
• /
• 2009

It is impossible to take the instant action in the distribution system When fault occures in a substation because operation of the substation and the distribution system are separated. However the power system automation has been studying about unity operation and co-operation between SCADA and DAS(Distribution Automation System). In this paper proposes a new algorithm of efficiency restoration using a outage load switching to a healthy MTR a fault occurrence at a MTR in united system between DAS and SCADA. In addtion, proposed algorithm includes a outage restoration method which keeps MTR optimal capacity with reorganization of distribution network in case it can not restore outage state loads caused by shortage of healthy MTR remain capacity. In case that proposed sequence still can not complete restoration, this paper suggests a efficiency outage restoration with objective function included priority in outage loads. In the case studies, the proposed algorithm have been verified in 2 MTR and 3 MTR substation

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.2
• /
• pp.53-62
• /
• 2024

This study assessed the efficiency of reducing soil erosion and suspended sediment through the restoration of alpine unauthorized and illegally cultivated fields, using the SWAT (Soil and Water Assessment Tool) model in the Mandae District. The results showed that in Scenario 5, which involved restoring unauthorized and illegal fields within forests, along rivers (banks), and in ditch areas were restored to their original land categories, achieved the highest efficiency in reducing average annual soil erosion and suspended sediment, with reductions of 8.1% and 4.5%, respectively. In particular, it was confirmed that the restoration of unauthorized and illegal fields within forested areas has a significant impact. This demonstrated that the restoration of unauthorized and illegal agricultural fields can substantially reduce the soil erosion and suspended sediment attributable to non-point source pollution. Our findings highlight the importance of managing these unauthorized and illegal agricultural activities in developing sustainable strategies within non-point source pollution management areas. This study is expected to provide important basic data to effectively establish water quality improvement strategies in the region of non-point source pollution management.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.71-80
• /
• 2019

This study examined the applicability of digital technologies based on three-dimensional(3D) scanning, modeling, and printing to the restoration of damaged artifacts. First, 3D close-range scanning was utilized to make a high-resolution polygon mesh model of a roof-end tile with a missing part, and a 3D virtual restoration of the missing part was conducted using a haptic interface. Furthermore, the virtual restoration model was printed out with a 3D printer using the material extrusion method and a PLA filament. Then, the additive structure of the printed output with a scanning electron microscope was observed and its shape accuracy was analyzed through 3D deviation analysis. It was discovered that the 3D printing output of the missing part has high dimensional accuracy and layer thickness, thus fitting extremely well with the fracture surface of the original roof-end tile. The convergence of digital virtual restoration based on 3D scanning and 3D printing technology has helped in minimizing contact with the artifact and broadening the choice of restoration materials significantly. In the future, if the efficiency of the virtual restoration modeling process is improved and the material stability of the printed output for the purpose of restoration is sufficiently verified, the usability of 3D digital technologies in cultural heritage restoration will increase.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.363-371
• /
• 1994

This thesis investigates an expert system(ES) to propose fault restoration plan by utilizing tree search strategies. In order to cope with an extensive amount of data and frequent breaker switching operations in distribution systems, the database of system configuration is constructed by using binary trees. This remarkably enhances the efficiency of search algorithm and makes the proposed ES easily adaptable to system changes due to switching operations. The rule-base is established to fully utilize the meris of tree-structured database. The inferring strategy is developed mainly based on the best-first search algorithm to increase computation efficiency. The proposed ES has been implemented to efficiently deal with large distribution systems by reducing computational burden remarkably compared with the conventional ES's.