Journal of Conservation Science (보존과학회지)

The Korean Society Of Conservation Science For Cultural Heritage (한국문화재보존과학회)
권호 표지
DOI QR코드

DOI QR Code

Application of Three-dimensional Scanning, Haptic Modeling, and Printing Technologies for Restoring Damaged Artifacts

  • Jo, Young Hoon (Department of Cultural Heritage Conservation Sciences, Kongju National University) ;
  • Hong, Seonghyuk (Department of Cultural Heritage Conservation Sciences, Kongju National University)
  • Received : 2019.01.25
  • Accepted : 2019.02.15
  • Published : 2019.02.20
Download PDF
⟨ Previous Next ⟩

Abstract

This study examined the applicability of digital technologies based on three-dimensional(3D) scanning, modeling, and printing to the restoration of damaged artifacts. First, 3D close-range scanning was utilized to make a high-resolution polygon mesh model of a roof-end tile with a missing part, and a 3D virtual restoration of the missing part was conducted using a haptic interface. Furthermore, the virtual restoration model was printed out with a 3D printer using the material extrusion method and a PLA filament. Then, the additive structure of the printed output with a scanning electron microscope was observed and its shape accuracy was analyzed through 3D deviation analysis. It was discovered that the 3D printing output of the missing part has high dimensional accuracy and layer thickness, thus fitting extremely well with the fracture surface of the original roof-end tile. The convergence of digital virtual restoration based on 3D scanning and 3D printing technology has helped in minimizing contact with the artifact and broadening the choice of restoration materials significantly. In the future, if the efficiency of the virtual restoration modeling process is improved and the material stability of the printed output for the purpose of restoration is sufficiently verified, the usability of 3D digital technologies in cultural heritage restoration will increase.

Keywords

References

  1. Abidi, M.H. and Ahmad, A., 2015, Haptics assisted virtual assembly. IFAC-PapersOnLine, 48, 100-105. https://doi.org/10.1016/j.ifacol.2015.06.065
  2. Ahn, J., Kong, D.Y. and Wohn, K.Y., 2013, Visualization of 3D scanned model for interpretation of heritage: case of dinosaur tracks for documentation and interpretation. Journal of the HCI Society of Korea, 8, 19-28. (in Korean with English abstract) https://doi.org/10.17210/jhsk.2013.05.8.1.19
  3. Balletti, C., Ballarin, M. and Guerra, G., 2017, 3D printing: State of the art and future perspectives. Journal of Cultural Heritage, 26, 172-182. https://doi.org/10.1016/j.culher.2017.02.010
  4. Choi, W.H. and Ko, S.W., 2014, A study on readability improvement method for ancient inscription of irregularity surface using cross section analysis. Journal of Information Technology Services, 13, 251-259. (in Korean with English abstract) https://doi.org/10.3923/itj.2014.251.259
  5. Correa, C.G., Nunes, F.L.S., Ranzini, E., Nakamura, R. and Tori, R., 2019, Haptic interaction for needle insertion training in medical applications: The state-of-the-art. Medical Engineering and Physics, 63, 6-25. https://doi.org/10.1016/j.medengphy.2018.11.002
  6. Escobar-Castillejos, D., Noguez, J., Neri, L., Magana, A. and Benes, B., 2016, A review of simulators with haptic devices for medical training. Education & Training, 40, 104.
  7. Ford, S. and Minshall, T., 2019, Invited review article: Where and how 3D printing is used in teaching and education. Additive Manufacturing, 25, 131-150. https://doi.org/10.1016/j.addma.2018.10.028
  8. Han, W.S., Park, G.J., Lim, S.J., Lee, Y.H., Hong, T.K. and Wi, K.C., 2010, The development of the unfading urethane polymer based on reversible properties for ceramics and restoration with this urethane product. Journal of Conservation Science, 26, 189-190. (in Korean with English abstract)
  9. Hwang, H.S. and Lee, H.S., 2006, Experimental study of restoration material on ceramics: long-necked jar and gourd-shaped pitcher. Journal of Conservation Science, 19, 31-42. (in Korean with English abstract)
  10. ISO/ASTM 52900, 2015, Standard terminology for additive manufacturing-General Principles-Terminology.
  11. Jo, Y.H. and Lee, C.H., 2009, 3D image analysis for digital restoration and structural stability evaluation of stone cultural heritage: five-storied Magoksa Temple stone pagoda. Journal of Conservation Science, 25, 115-130. (in Korean with English abstract)
  12. Jo, Y.H. and Lee, C.H., 2012, Three-dimensional digital restoration and surface depth modeling for shape analysis of stone cultural heritage: Haeundae Stone Inscription. Journal of Conservation Science, 26, 189-190. (in Korean with English abstract)
  13. Jo, Y.H. and Lee, C.H., 2016, Displacement analysis of five-story stone pagoda in Geumgolsan Mountain, Jindo, using terrestrial laser scanning. Indian Journal of Science and Technology, 9, 1-6.
  14. Jun, B.K., Lee, C.H. and Suh, M., 2008, Stability evaluation of multi-storied stone pagoda in the Daewonsa Temple using three-dimensional image analysis. Journal of Conservation Science, 22, 31-42. (in Korean with English abstract)
  15. Katz, J., 2017, Digitized Maya music: the creation of a 3D database of Maya musical artifacts. Digital Applications in Archaeology and Cultural Heritage, 6, 29-37. https://doi.org/10.1016/j.daach.2017.08.004
  16. Keles, M. and Yaman, U., 2018, Tuning the center of gravity of 3D printed artifacts. Procedia Manufacturing, 17, 371-378. https://doi.org/10.1016/j.promfg.2018.10.059
  17. Kim, H. and Okada, Y., 2017, An image characteristics of metal movable type printing on one hundred poets of the Tang Dynasty by the measurement of 3D digital microscope. Journal of Conservation Science, 33, 43-49. (in Korean with English abstract) https://doi.org/10.12654/JCS.2017.33.1.06
  18. Kim, J.U. and Lee, W.H., 2017, Monitoring changes of designated cultural heritage area using 3D mapping technique. Journal of the Korean Institute of Traditional Landscape Architecture, 15, 43-51. (in Korean with English abstract)
  19. Kyung, K.U. and Park, J.S., 2006, The state of the art and R&D perceptives on haptics. Electronics and Telecommunications Trends, 21, 93-108. https://doi.org/10.22648/ETRI.2006.J.210510
  20. Lee, C.H., Jo, Y.H. and Kim, S.D., 2012, Three-dimensional image analysis deterioration evaluation and scientific conservation treatement of the Daechiri dinosaur trackways in Haman Country, Korea. Journal of the Geological Society of Korea, 48, 179-191. (in Korean with English abstract)
  21. Lee, C.H., Kim, M.Y., Jo, Y.H. and Lee, M.S., 2010a, Conservation treatment based on material characteristics, provenance presumption and deterioration diagnosis of the seven-storied Jungwon Tappyeongri stone pagoda, Chungju, Korea. MUNHWAJAE, 43, 4-25. (in Korean with English abstract)
  22. Lee, C.Y. and Han, K.S., 2015, A study on making a replica for restoration of the stone lion statue excavated from Woljeong Bridge. Journal of Conservation Science, 31, 147-157. (in Korean with English abstract) https://doi.org/10.12654/JCS.2015.31.2.07
  23. Lee, H.S. and Wi, K.C., 2015, Restoration of earthenware & porcelain cultural assets using 3D printing. Journal of Conservation Science, 31, 131-145. (in Korean with English abstract) https://doi.org/10.12654/JCS.2015.31.2.06
  24. Lee, J.W., Lee, M.S., Choi, Y.S., Oh, J.H., Kim, J.H. and Kim, S.D., 2010b, Scientific conservation treatment and restoration of the monument for Jo Heon and the soliders in Chilbaeguichong( Chilbaeguichong Jungbongjoheonseonsaengilgunsunuichong). Journal of Conservation Science, 26, 191-201. (in Korean with English abstract)
  25. Lee, S., Kwon, J., Nam, B. and Ahn, B., 2007, Study on the resistance for atmospheric corrosion of conventional epoxy resins applied to the restoration of iron relics. Journal of Conservation Science, 21, 41-48. (in Korean with English abstract)
  26. Machidon, O.M., Duguleana, M. and Carrozzino, M., 2018, Virtual humans in cultural heritage ICT applications: A review. Journal of Cultural Heritage, 33, 249-260. https://doi.org/10.1016/j.culher.2018.01.007
  27. Nam, B.J. and Jang, S.Y., 2017, Accelerated degradation test and failure analysis of rapid curing epoxy resin for restoration of cultural heritage. Journal of Conservation Science, 33, 467-483. (in Korean with English abstract) https://doi.org/10.12654/JCS.2017.33.6.06
  28. Park, S.Y., 2008, The development of Goguryo mural contents experienced with five senses based on virtual reality. Journal of Digital Design, 18, 137-146. (in Korean with English abstract)
  29. Park, S.Y. and Kang, S.M., 2007, A study on the development of haptic interface system for the Pagoda of Mireug. Journal of Basic Design & Art, 8, 163-169. (in Korean with English abstract)
  30. Rastogi, N. and Srivastava, A.K., 2019, Control system design for tokamak remote maintenance operations using assisted virtual reality and haptic feedback. Fusion Engineering and Design, 139, 47-54. https://doi.org/10.1016/j.fusengdes.2018.12.094
  31. Sanchez-Aparicio, L.J., Pozo, S.D., Ramos, L.F., Arce, A. and Fernandes, F.M., 2018, Heritage site preservation with combined radiometric and geometric analysis of TLS data. Automation in Construction, 85, 24-39. https://doi.org/10.1016/j.autcon.2017.09.023
  32. Shin, Y.H. and Hwang, H.S., 2018, A study on the suitability of 3D printer as material selection and restoration material considering the surface texture of pottery. The Journal of the Korean Society of Ceramic Art, 15, 131-144. (in Korean with English abstract)
  33. Soler, F., Melero, F.J. and Luzon, M.V., 2017, A complete 3D information system for cultural heritage documentation. Journal of Cultural Heritage, 23, 49-57. https://doi.org/10.1016/j.culher.2016.09.008
  34. Wilson, L., Rawlinson, A., Frost, A. and Hepher, J., 2018, 3D digital documentation for disaster management in historic buildings: applications following fire damage at the Mackintosh building, The Glasgow School of Art. Journal of Cultural Heritage, 31, 24-32. https://doi.org/10.1016/j.culher.2017.11.012
  35. Wu, W., Cen, Y., Hong, Y., Keeling, A. and Khambay, B., 2016, A pilot study to assess the feasibility and accuracy of using haptic technology to occlude digital dental models. Journal of Dentistry, 46, 54-60. https://doi.org/10.1016/j.jdent.2016.01.004
  36. Xu, J., Ding, L. and Love, P.E.D., 2017, Digital reproduction of historical building ornamental components: From 3D scanning to 3D printing. Automation in Construction, 76, 85-96. https://doi.org/10.1016/j.autcon.2017.01.010
  37. Yang, P.S. and Seo, J.H., 2011, A study on the changes process repair and restoration method of ceramic. Journal of Conservation Science, 27, 49-59. (in Korean with English abstract)
  38. Zhang, Y., Li, K., Chen, X., Zhange, S. and Geng G., 2018, A multi feature fusion method for reassembly of 3D cultural heritage artifacts. Journal of Cultural Heritage, 33, 191-200. https://doi.org/10.1016/j.culher.2018.03.001