• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.674-678
• /
• 2011

Purpose: Straight closure line of classic Weir excision leaves visible scars and makes it difficult to precisely approximate resection margins. Hence this study introduces Park-Weir excision that effectively reduces alar width with minimal alar rim scar by 3-dimensional zigzag incision and properly controls the approximation of edges. Methods: From 2008 to 2010, 14 patients underwent Park-Weir excision, crossed wedge excision on alar rim not exceeding 5 mm in width. Each patient was photographed in the same position. Alar width and columellar height against intercanthal distance was compared preoperatively and postoperatively, using image analysis software. Results: Five patients were female and nine were male. Average follow up period was 8 month. Alar width was reduced by 50.50% to 45.96%, original alar width reduced by 8.98% without significant changes in columellar height which was reduced by 0.39%. No visible scar was reported during outpatient follow-up. Conclusion: Park-Weir excision effectively reduces alar width and corrects the flaring of alar without affecting the columellar height. Zigzag incision of Park-Weir excision leaves aesthetically more pleasant scar than straight single incision of classical Weir excision.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.103-110
• /
• 2015

In this paper, we propose a deblurring method using 1/4 selective filter. Deblurring methods require a lot of processing time for deblurring. In order to enhance execution speed, we propose a novel 1/4 selective filter. The proposed 1/4 selective filter restores major edge, but it distorts minor edge and texture. To solve this problem, we apply 1/4 selective filter to restore major edge and DOG(Difference of Gaussian) filter to restore minor edge and texture. Experimental results show that the proposed method removes the blur effectively.

• Nonlinear Functional Analysis and Applications
• /
• v.29 no.1
• /
• pp.131-164
• /
• 2024

In this research, we study a modified relaxed Tseng method with a single projection approach for solving common solution to a fixed point problem involving finite family of τ-demimetric operators and a quasi-monotone variational inequalities in real Hilbert spaces with alternating inertial extrapolation steps and adaptive non-monotonic step sizes. Under some appropriate conditions that are imposed on the parameters, the weak and linear convergence results of the proposed iterative scheme are established. Furthermore, we present some numerical examples and application of our proposed methods in comparison with other existing iterative methods. In order to show the practical applicability of our method to real word problems, we show that our algorithm has better restoration efficiency than many well known methods in image restoration problem. Our proposed iterative method generalizes and extends many existing methods in the literature.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.49-55
• /
• 2013

To explore the paper materials for restoration of the Annals of the Joseon Dyansty, durability of the three type of the traditional Korean Papers were estimated in this study, through moist heat artificial aging test. Three types(D, F, and G) which showed the best preservation performance in dry heat and UV treatment in the previous study were selected and artificial accelerated aging treatment with moist-heat process was conducted; the viscosity change rate was D>G>F; folding endurance G>D>F; $L^*$ value F>D>G; $a^*$ and $b^*$ change rate D>G>F; brightness decrease rate D>G>F, suggesting paper F showed the least change rate in physical/optical properties. Also the CLSM image observation showed fair coherence among fibers and confirmed paper mulberry. And in FDI extraction from each sample, paper F showed the highest value. Overall, paper F (traditional glossy paper) showed the highest stability against thermal treatment. It confirms that paper F is suitable as restoration paper for tributary remains including the annals of the Joseon Dynasty for its steady strength/viscosity decrease rate and color change rate.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.467-473
• /
• 2005

Calvarial bone grafting in craniomaxillofacial trauma and facial reconstructive surgery is now widely recognized and accepted as a standard procedure. One of the commonly reported problems of calvarial bone graft is the contour defect caused by partial resorption of the graft. But, there are few reports that discuss the fate of the calvarial bone graft based on the quantitative data. In this article, the changes of grafted calvarial bone were evaluated using 3-dimensional computed tomography(CT). 9 patients were observed with the CT scans at 2mm thickness immediately after operation and at the time of last follow-up. The area of the bone defect was segmented on the 3-dimensional CT image and calculated by AnalyzeDirect 5.0 software. The immediate postoperative bone defect area of the recipient site and the donor site were $612.9mm^2$ and $441.5mm^2$, respectively, which became $1028.1mm^2$ and $268.8mm^2$, respectively at the last follow-up. In conclusion, the bone defect area was less increased on the donor site of calvarial bone graft than on the recipient site. And the CT scan is a valuable imaging method to assess and follow-up the clinical outcome of calvarial bone grafting.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.16-26
• /
• 2006

In this paper, we propose a 3D shape restoration system which measures height and surface shape of transparent ITO glass and delivers errors in focal length and incident angle of laser beam to femto-second laser micromachining. The proposed system is composed of a line scan laser, a high resolution camera, a linear motion guide synchronized to image capturing, and a control station. Also, we define the sensitivity indices that represent a relation between measurement error and a position of a camera and scan laser, and utilize it for optimum design. The results of the proposed system are compared with results of SPM(Scanning Probe Microscope) and prove the usefulness of the system.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2020

In this study, we 1) identified the damaged areas along the south limit line (SLL) of the demilitarized zone (DMZ) by the military's 'DMZ barren land campaign', and 2) categorized the identified damaged areas into a few ecological types. Using high-resolution satellite images, we delineated the total damaged areas to be 1,183.2 ha, which accounted for 50.1% of the 100-m northern buffer regions from the SLL. Of the total damaged areas, 16% were severely damaged, i.e., they had been damaged until recently and so remained barren without vegetation cover. In other areas, the levels of damage were either moderate (59.9%) or slight (24.1%), due to natural succession that turned those areas to grassland or forest. Using satellite image-derived land cover maps and climatic and topographic data, we categorized the damaged areas into seven types: lowland grassland (19.8%), western lowland forest (21.4%), low-altitude forest (25.5%), mid-altitude forest (18.4%), high-altitude forest (6.8%), vicinity in east coast (7.9%), and waterbody (0.2%). These types can be used to identify proper measures to restore ecosystems in the DMZ for now and after Korean reunification.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.4
• /
• pp.13-30
• /
• 2020

This study aims to analyze the qualitative and quantitative effects of environmental policies in terms of green space management using logistic regression model(LRM). Landsat satellite imageries in 1985, 1992, 2000, 2008, and 2015 are classified using a hybrid-classification method. Based on these classified maps, logistic regression model having a deforestation tendency of the past is built. Binary green space change map is used for the dependent variable and four explanatory variables are used: distance from green space, distance from settlements, elevation, and slope. The green space map of 2008 and 2015 is predicted using the constructed model. The conservation effect of Ulsan's environmental policies is quantified through the numerical comparison of green area between the predicted and real data. Time-series analysis of green space showed that restoration and destruction of green space are highly related to human activities rather than natural land transition. The effect of green space management policy was spatially-explicit and brought a significant increase in green space. Furthermore, as a result of quantitative analysis, Ulsan's environmental policy had effects of conserving and restoring 111.75㎢ and 175.45㎢ respectively for the periods of eight and fifteen years. Among four variables, slope was the most determinant factor that accounts for the destruction of green space in the city. This study presents logistic regression model as a way of evaluating the effect of environmental policies that have been practiced in the city. It has its significance in that it allows us a comprehensive understanding of the effect by considering every direct and indirect effect from other domains, such as air and water, on green space. We conclude discussing practicability of implementing environmental policy in terms of green space management with the focus on a non-statutory plan.

• Journal of Internet of Things and Convergence
• /
• v.8 no.2
• /
• pp.79-84
• /
• 2022

This paper presents an enhancement method of document restoration capability which is robust for security, loss, and contamination, It is based on two methods, that is, encryption and DnCNN(DeNoise Convolution Neural Network). In order to implement this encryption method, a mathematical model is applied as a spatial frequency transfer function used in optics of 2D image information. Then a method is proposed with optical interference patterns as encryption using spatial frequency transfer functions and using mathematical variables of spatial frequency transfer functions as ciphers. In addition, by applying the DnCNN method which is bsed on deep learning technique, the restoration capability is enhanced by removing noise. With an experimental evaluation, with 65% information loss, by applying Pre-Training DnCNN Deep Learning, the peak signal-to-noise ratio (PSNR) shows 11% or more superior in compared to that of the spatial frequency transfer function only. In addition, it is confirmed that the characteristic of CC(Correlation Coefficient) is enhanced by 16% or more.

• Journal of Conservation Science
• /
• v.28 no.1
• /
• pp.87-94
• /
• 2012

This study was focused on digital restoration and surface depth modeling applying the three-dimensional laser scanning system of the Haeundae Stone Inscription. Firstly, the three-dimensional digital restoration carried out acquiring of point cloud using wide range and precision scanner, thereafter registering, merging, filtering, polygon mesh and surveyed map drawing. In particular, stroke of letters, inscribed depth and definition appearing the precision scanning polygon was outstanding compared with ones of the wide range polygon. The surface depth modeling completed through separation from polygon, establishment of datum axis, selection of datum point, contour mapping and polygon merging. Also, relative inscribed depth (5~17mm) and outline by the depth modeling was well-defined compared with photograph and polygon image of the inscription stone. The digital restoration technology merging wide range and precision scanning restored the total and detailed shape of the Stone Inscription quickly and accurately. In addition, the surface depth modeling visibly showed unclear parts from naked eye and photograph. In the future, various deteriorations and surrounding environment change of the Stone Inscription will be numerically analyze by periodic monitoring.