• 대한인간공학회지
• /
• 제27권3호
• /
• pp.33-41
• /
• 2008

The goal of this study was to compare wrist posture, muscular loads and perceived comfort among wearable wrist rest (WR), general wrist rest(GR), no wrist rest(NR) during keyboard and mouse use. Thirteen subjects performed text editing task in three test conditions: wearable wrist rest(WR), general wrist rest(GR), no wrist rest(NR). During text editing task, the right wrist posture was recorded by an electrogoniometer and the muscle activity in upper trapezius, anterior deltoid, extensor digitorum, extensor carpi ulnaris were recorded by electromyography. After all of the tests, the subjects rated perceived comfort. Working with wearable wrist rest(WR), compared to no wrist rest(NR) and general wrist rest(GR), decreased wrist radial/ulnar deviation and also decreased muscle activity in upper trapezius and anterior deltoid. At the same time, in work with wearable wrist rest(WR), the subjects rated more comfort at 5 of 8 body locations(shoulder, upper arm, wrist, hand, body).

• 한국멀티미디어학회논문지
• /
• 제20권5호
• /
• pp.808-826
• /
• 2017

Most of conventional DSS's(Digital Signage Systems) have been built based on LAMP framework. Recent researches have shown that MEAN or MERN stack framework is simpler, more flexible, faster and more suitable for web-based application than LAMP stack framework. In this paper, we propose a design and implementation of MEARN (ME(A+R)N) stack-based real-time digital signage system, MR-DSS, which supports handing real-time tasks like urgent/instant messaging, system status monitoring and so on, efficiently in addition to conventional digital signage CMS service tasks. MR-DSCMS, CMS of MR-DSS, is designed to provide most of its normal services by REST APIs and real-time services like urgent/instant messaging by Socket.IO base under MEARN stack environment. In addition to architecture description of components composing MR-DSS, design and implementation issues are clarified in more detail. Through experimental testing, it is shown that 1) MR-DSS works functionally well, 2) the networking load performance of MR-DSCMS's REST APIs is better compared to a well-known open source Xibo CMS, and 3) real-time messaging via Socket.IO works much faster than REST APIs.

• 항공우주정책ㆍ법학회지
• /
• 제20권2호
• /
• pp.235-251
• /
• 2005

항공운송산업의 선진극인 독일에서는 1994년 새로 제정된 근로시간법(Arbeitszeitgesetz)에서 통상 8시간을 1일 최대근로시간으로 규정하여 1주일간 근로시간을 48시간으로 규정하는 한편, 6개월 또는 24주 이내의 기간을 기준으로 1일 평균 8시간을 넘지 않는 범위 내에서 1일 8시간을 초과하여 10시간까지 근로시키는 것을 가능하게 함으로써 변형근로시간제를 채택할 경우 특정 주의 근로시간을 최대 60시간까지 가능하게 하고 있다. 그리고, 근로시간법에서는 1일 근로의 종료에서 다음 근로의 개시까지는 최소 11시간의 휴식시간을 부여하도록 함으로써 근로자가 1일 동안 사용자의 지휘하에 놓이는 시간의 상한을 13시간으로 제한하는 독특한 입법형식을 취하고 있다. 한편, 근로시간법 제5조, 제7조, 제14조, 그리고 제15조에서는 항공기승무원등과 같이 특수한 형태의 근로를 하는 직종에 대해서는 일반원칙의 적용을 배제하는 예외조항을 두고 있으며, 점포영업시간법에서도 특정한 경우에 대해서는 동법의 적용을 배제하는 예외조항을 두고 있다. 이라한 예외규정에 따라 제정된 행정명령인 항공운송사업자에 관한 2차 볍규명령(2.DV LuftBO)에서는 개별 항공기승무원의 블록시간, 비행근무시간, 휴식시간 등에 대해 자세한 제한규정을 설정하고 있다. 특히, 다른 나라에서는 찾아보기 어려운 시차를 고려한 휴식시간 부여기준 연장이라든가 최대비행근로시간을 1일 20시간까지 가능하도록 직접 규정하고 있는 것은 항공기승무원의 건강을 유지할 수 있도록 함으로써 항공안전을 확보하는 한편, 항공운송산업의 현실을 정확히 반영하고 있다. 독일의 이러한 입법방식은 항공기승무원들의 근로시간 및 휴식시간에 대해 근로기준법과 항공법에서 각각 규정함으로써, 일반 업종 근로자들에게 적용되는 근로기준법의 규정과 항공기승무원들의 근로특정을 고려한 항공법의 규정을 중첩적으로 준수하여야 함으로 인해 각종 문제점을 노정하고 있는 우리나라도 참고하고 도입할만한 우수한 입법으로 판단된다. 아울러 향후 제정될 JAR 부속서 Q에도 반영되어 유럽국가 모두에 적용되어야 할 우수한 제도이다.

• 임상간호연구
• /
• 제27권2호
• /
• pp.179-186
• /
• 2021

Purpose: The purpose of our study was to identify the bleeding risk factors and to validate the safety of shortening the bed rest time after bone marrow examination in pediatric hemato-oncologic patients. Methods: From July 2019 to September 2020, 145 patients were enrolled from a single center. Medical records were reviewed retrospectively. Descriptive statistics were presented, and the data were analyzed using 𝑥²-test, Fisher's exact test, and a logistic regression. Results: After two hours of bed rest, most of the patients (91.7%) did not have bleeding complications, and only 8.3% of the patients had a minor bleeding. The rate of major bleeding complications, including hematoma, retroperitoneal hemorrhage rate was zero. The bleeding complications was frequently found on bilateral procedures than unilateral procedures and the difference were statistically significant (p<.05). Conclusion: Two hours of bed rest time after bone marrow examination could be safe and adequate in pediatric hemato-oncologic patients.

• 한국보육지원학회지
• /
• 제9권5호
• /
• pp.335-355
• /
• 2013

본 연구는 아동권리 존중 측면에서 어린이집에서의 휴식 및 낮잠에 대한 유아들의 인식과 요구는 무엇인지 알아보는 것이 목적이다. 연구대상은 서울시 국공립 B어린이집 원아 만4세 20명, 만5세 20명으로 총40명이다. 연구방법은 면담조사와 프로젝트활동 중에서 참여관찰로 이루어졌으며 이 과정에서 수집한 관찰기록, 녹음자료, 동영상자료의 전사본을 내용분석 하였다. 연구결과로 첫째, 유아가 인식하는 휴식의 의미는 가족과 함께 하는 시간, 재미있는 놀이하는 시간, 힘들고 화날 때 필요한 시간, 맛있는 음식을 먹는 시간으로 나타났으며 둘째, 어린이집에서의 낮잠에 대해 유아들은 자기 싫은데도 자야하는 시간, 조용한 음악 듣는 시간, 자고나면 기분이 좋아지는 시간으로 인식하였으며 셋째, 어린이집에서의 휴식 및 낮잠에 대해 유아들은 친구들이 귀가 후 종일반에 모였을 때 쉬고 싶어 하였으며, 교실 외 별도의 공간을 필요로 하고, 휴식할 때 친숙한 성인의 보호를 요구했다. 이 결과를 통해 유아들의 휴식 및 낮잠을 즐길 수 있는 권리를 존중하는 측면에서 향후 연구방향을 제안하였다.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.119-124
• /
• 2008

Many automobile assembly workers often do several cycles of tasks continuously, i.e., without breaks, to get a longer break. This is not recommended since the dose of fatigue increases exponetially with time and it takes much longer time to recover. In this study, a laboratory experiment was conducted to investigate the effect of work/rest schedules on workload of a repetitive upper-limb task. Eleven male subjects participated in the experiment, in which simulated screw driving tasks were carried out repetitively with 3 different work/rest schedules: standard breaks(1 cycle of work at a time, 60 20-s breaks), medium breaks(5 cycles of work at a time, 12 100-s breaks), and long breaks(10 cycles of work at a time, 6 200-s breaks). The result showed that medium- and long-breaks schedules significantly increased the level of perceived discomfort and %HRR as compared to the standard-break schedule. The subjects' preference was not statistically different among work/rest schedules, which might be caused from the absolutely low level of workload of the experimental tasks. From the results, it is recommended to have frequent and shorter breaks rather than infrequent and longer breaks to decrease the level of physical workload. A more expanded studies, however, should be carried out to provide more practical safety guidelines on the work practice of continuous working without breaks among automobile assembly workers.

• Tribology and Lubricants
• /
• 제22권2호
• /
• pp.59-65
• /
• 2006

In hard disk drives as the head to disk spacing continues to decrease to facilitate recording densities, slider disk interactions have become much more severe due to direct contact of head and disk surfaces in both start/stop and flying cases. The slider disk interaction in CSS (contact-start-stop) mode is an important source of particle generation and tribocharge build-up. The tribocharge build-up in the slider disk interface can cause ESD (electrostatic discharge) damage. In turn, ESD can cause severe melting damage to MR or GMR heads. The spindle speed of typical hard disk drives has increased in recent years from 5400 rpm to 15000 rpm and even higher speeds are anticipated in the near future. And the increasing disk velocity leads to increasing disk acceleration and this might affect the tribocharging phenomena of the slider/disk interface. We investigated the tribocurrent/voltage build-up generated in HDD, operating at increasing disk accelerations. In addition, we examined the effects with relative humidity conditions and rest time. We found that the tribocurrent/voltage was generated during pico-slider/disk interaction and its level was about $3\sim16pA$ and $0.1\sim0.3V$, respectively. Tribocurrent/voltage build-up was reduced with increasing disk acceleration. Higher humidity conditions $(75\sim80%)$ produced lower levels tribovoltage/current. Therefore, a higher tribocharge is expected at a lower disk acceleration and lower relative humidity condition. Rest time affected the charge build-up at the slider-disk interface. The degree of tribocharge build-up increased with increasing rest time.

• 대한간호
• /
• 제36권2호
• /
• pp.73-83
• /
• 1997

Bed rest is recommended to prevent postlumbar puncture headaches(PLPHA), but the period of bed rest varies in the literature from 6 hours to 24 hours. In clinical practice the period of bed rest varies but nursing methods for adults and children have little difference. In Seoul National University Hospital, children have been given at least 6 hours bed rest after a lumbar puncture. Pediatric oncology patients require a lumbar puncture for an initial diagnosis, follow up treatment or administration of chemotherapeutic agent. But it is difficult for young children to lie supine or to refrain from their usual activities in any way, and unpleasant problems related to a shortage of beds often occurs during discharge or in an outpatient setting. The purpose of this study is to substantiate the preventive effect of PLPHA by the period of bed rest, to identify the other factors that influence PLPHA, and to use the nursing methods proper to children. The subjects were 65 children, ages 1-17, undergoing treatment in the children's cancer center at SNUCH during the period June 1, 1995, to Aug. 31, 1995. The team nurses asked questions about PLPHA of the parents and children in order to fill out a questionnaire. The data were evaluated by percent, t-test, Chi-square test and Mann-Whitney U test. Result; 1. There was no significant difference relating the bed rest time spent to the occurrence of postspinal headaches (t-test). 2. There was a significant risk of PLPHA in the children who were irritable before procedure and/or had experienced previous PLPHA(p<0.05, ${x^2}-test$). 3. The following factors were not found to be associated with increased risk of PLPHA: previous puncture experience, giving analgesics, the choice of puncturist, inpatient/outpatient status, gauge of needle, purpose, the amount of CSF removed, gender, diagnosis, the number of peripheral WBCs, previous lumbago experience after LP, position after bed rest, age, the number of aural puncture at the time. A longer period of bed rest is unlikely to be more effective to prevent PLPHA and seems impractical. A shorter period will save time and effort. Perhaps it will also allay some of the fears which surround LP. So 1 hour bed rest after LP is suggested and nursing methods for emotional support should be investigated to reduce PLPH.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1295-1304
• /
• 2015

In this paper, an approach to extend the life of lead-acid batteries through the elimination of sulfation with "rest time" using the pulse current of a conventional DPV (Differential Pulse Voltammetry) method is discussed. A new rest time without "0" current in "saw-tooth" pattern pulses is proposed to overcome the "0" current (blackout period), which is a shortcoming of DPV. This will enable the proposed method to be used in the loaded state. In the proposed approach, ESSs (Energy Storage Systems) were discharged for 5 h twice per day for 6 months on weekdays. To observe the changes in the lifespan of the systems, for the same period, the changes in the impedances of lead-acid batteries which were being charged e without charging and discharging were measure and compared. This study is focused on determining the effectiveness of lead-acid batteries as ESSs.

• 해양환경안전학회지
• /
• 제24권6호
• /
• pp.709-716
• /
• 2018

2017년 승선실습 중이던 위탁실습생이 사망하는 사고가 있었다. 이 실습생은 1일 12시간씩 작업을 했다고 한다. 실습생에 대한 업무시간과 휴식시간을 규정하는 법령은 아직까지 없다. 이 연구는 상선에서 승선실습을 하는 위탁실습생의 업무실태 파악과 위탁실습생의 처우 개선을 위해 설문조사와 통계분석을 수행했다. 설문은 상선에서 위탁실습을 다녀온 학생을 대상으로 진행했다. 설문결과는 다음과 같다. 첫째, 선종에 관계없이 1일 평균 10시간씩 업무했다는 의견이 43.0 %를 차지했고, 휴식시간은 평균 8시간이었다는 의견이 35.2 %를 차지했다. 응답자의 15.6 %가 12시간 이상 업무한 경험이 있다고 했다. 라면 끓이기, 휴식 중에 작업, 사적인 심부름 등 부당한 지시 사례가 있었다. 둘째, 선종별 교육만족도에 대해 LNG운반선에서 실습한 학생들의 만족도가 높았던 반면, 산적화물선과 컨테이너운반선의 교육만족도는 낮았다. 선박의 크기와 선령, 업무시간, 휴식시간, 실습지원비가 교육만족도에 미치는 영향은 미약함을 확인했다. 끝으로, 위탁실습생의 근로자성 판단에 대해 56.8 %가 '근로에 해당된다'고 응답했다. 설문결과를 통해 위탁실습의 열악성과 위탁실습생이 근로와 휴식에 대한 법령의 사각지대에 있음을 확인했다. 이를 위해 업무시간과 휴식시간의 법령 마련, 폭력 및 성희롱에 피해방지시스템 구축 등을 개선방안으로 제시했다. 이 연구는 위탁실습생의 업무와 휴식에 논문의 초점을 맞춰 선박의 종류와 크기, 선령별로 실습만족도를 분석했다는 것에 의의가 있다.