• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.167-168
• /
• 2011

본 논문에서는 전기자동차 (Electric Vehicles, EVs)에 사용되는 탑재형 충전기 (On-Board Charger, OBC)에 적용된 부하직렬공진형 컨버터 (Series-Loaded Resonant DC-DC Converter, SRC)의 최적 공진주파수를 설계하기 위한 과정을 제시한다. 실제 OBC제품의 입 출력을 토대로 프로세스를 진행하여, 다양한 주파수에 따른 공진 네트워크를 구성한다. 그 결과로 얻어진 파라미터를 이용하여 스위칭 주파수에 따른 자성소자의 사이즈 변화 및 손실량 변화 추이를 분석하여 최적의 설계점을 찾는다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.53-60
• /
• 2001

In many applications of power electronics, high frequency resonant inverters are used, and the PAM(Pulse Amplitude Modulation), PFM(Pulse Frequency Modulation) or PWM(Pulse Width Modulation) techniques are used to control the output power of resonant inverters. And the resonant inverters have to control the output frequency for the reliable operation under the variable load conditions. In this paper, a new switching scheme is proposed as a PWM control of resonant inverters. With the proposed method, it can be obtained that optimum resonant frequency and unity output displacement factor under the variable resonant frequency adaptively. The detail algorithm or the proposed PWM switching scheme and its output characteristics are discussed. And the veridity of the proposed method is confirmed with the experimental results.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.72-78
• /
• 1999

The frequency characteristics of surface corona discharge from the electrodes on the ceramic substrate ozonator were investigated. The frequency characteristics of dark current were compared with that of corona discharge. Switching frequency which was the fraction of resonant frequency was found to be effective for corona discharge. This is regarded to distort the electric field distribution on the discharge plate which is essential for corona discharge. The measurement showed the efficiency of 28mg/W ozone generation when the switching frequency was 1/5 of the resonant frequency.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.113-122
• /
• 1999

A new resonant switching Watkins-Johnson converter was proposed, which minimizes the switching loss and is well suited for high-frequency operation. The steady-state analyses revealed that the voltage gain of the proposed converter is solely determined by the switching frequency. Consequently, to regulate the output voltage of the converter for variable load current the switching frequency should be varied accordingly. Based on the results of analyses, an optimum design procedure for the resonant component values is proposed, which minimized the voltage stress of power switch while maintaining the desired property of zero-voltage switching. Finally, accuracy of analyses and validity of an optimum design procedure are verified on an experimental resonant switching Watkins-Johnson converter prototype.

• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.29-42
• /
• 2005

During a long journey of agricultural products from the production area to markets, the quality of agricultural products was always affected by some degree of vibration. The vibration input during the transportation may cause serious agricultural product injury, and this damage is particularly severe whenever the vegetable inside package is free to bounce, and is vibrated at its resonant frequency. The objectives of this study were to determine the resonant frequency of the oriental melon and to investigate the relationships between resonant frequency and physical properties of the oriental melon such as mass, volume and major and minor axes. In this study vibration testing device was constructed to determine the vibration response of the oriental melon in frequency ranges of 5 to 150 Hz. The computer program for controlling the vibration shaker and the function generator and measuring the vibration characteristics of the oriental melon was developed. The ranges of resonant frequency and peak acceleration at resonance of the oriental melon were 51 to 73 Hz and 1.24 to 1.92 G-rms, respectively. The resonant frequency and the peak acceleration decreased with the increase of the sample mass, volume, major and minor axes of the oriental melon. Multiple regression models for resonant frequency and peak acceleration of the oriental melon as a function of mass, major axis and minor axis of the sample were developed and analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1090-1099
• /
• 2004

In this paper a novel design of equilateral-triangular microstrip antenna using PIN diode fur switching the resonant frequency is presented and experimentally studied. The proposed antenna has changed the resonant frequency by length of spur-lines on the patch, and PIN diodes are utilized to switch the spur-line on and off. The shape of the spur-line is changed according to the on and off states of PIN diode and the equilateral triangular microstrip antenna has different resonant frequencies in accordance with them. The resonant frequency is 1.22 GHz with off states since the surface currents flow the periphery of T shape spur-lines, while the resonant frequency is 1.82 GHz with on states since the surface currents are little effect with the conventional equilateral triangular microstrip antenna. The radiation pattern of the proposed antenna has a good linear polarization with the cross polarization of -20 dB both with on and off states.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.271-274
• /
• 2003

본 논문에서는 통신 기지국용 전원으로 사용할 수 있는 주파수 제어 직렬 공진형 컨버터의 동작 원리 및 특성을 살펴보고 실제의 전원 시스템을 설계 및 제작하려고 한다. 주파수 제어 공진형 컨버터 시스템은 POSR(Parallel Output Series Resonant) 형태이기 때문에 부하에 강인하고 주파수를 제어함으로써 입력전압의 변화에도 안정된 출력을 보여준다. 실제 시스템 제작에 앞서 먼저 시뮬레이션을 통한 시스템의 분석을 하였고 시뮬레이션 프로그램은 ACSL(Advanced Continuous Simulation Language)을 사용하였다.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2021

In this paper, the design method for a high-sensitivity compact resonator for chipless RFID tags is proposed. Proposed high-sensitivity compact resonator uses an interdigital-capacitor structure instead of a capacitor-shaped strip structure in a conventional ELC resonator. The length of the electrode plate of the IDC structure is longer than that of the conventional capacitor-shaped structure, resulting in a larger equivalent capacitance of the resonator. This can lower the resonant peak frequency of the RCS characteristic. Two resonators with the same length of the square loop and the width of the strip are fabricated on an RF-301 substrate with a thickness of 0.8 mm. The experiment results show that the resonant peak frequency and value of the bistatic RCS for the ELC resonator were 4.305 GHz and -30.39 dBsm, whereas those of the proposed IDC resonator were 3.295 GHz and -36.91 dBsm. Therefore, the size of the resonator is reduced by 23.5% based on the measured resonant peak frequency of the RCS characteristic.

• Journal of IKEEE
• /
• v.8 no.2 s.15
• /
• pp.195-206
• /
• 2004

In an RFID system, it is desirable to have both the reader and the transponder tuned to the same resonant frequency for efficient data transmission between them. Any difference in frequency will decrease the transponder coil voltage or the internal power supply voltage and will increase the possibility of zero modulation in the reader coil, which results in the reduction of the reading distance. In this paper, the phenomena caused by the frequency mismatch are theoretically analyzed and mathematically modelled. Several schemes to compensate for the frequency mismatch are also mentioned. The derived equations and analyzed theory on the data transmission between the reader and the transponder will be helpful to the development of RFID systems for many applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.228-228
• /
• 2010

본 연구에서는 공진주파수 수식을 이용한 MATLAB과 Modal 해석법을 사용한 ANSYS로 공진주파수 특성을 시뮬레이션 하였다. 외팔보의 시뮬레이션 결과에서는 길이가 길어짐에 따라, 또는 proof mass의 크기가 커짐에따라 공진주파수 특성이 낮아지는 결과가 나타났다. 따라서 본 실험에서의 외팔보는 낮은 공진 주파수를 가지기 위해 Si proof mass를 사용하여 제작하였다. 외팔보 소자는 Silicon-on-insulator wafer를 사용하여 SiO2/Ti/Pt/PZT/Pt 박막을 증착하였고, 마스크를 사용한 식각 공정으로 제작하였다. 이때의 MATLAB, ANSYS 시뮬레이션 결과와 실험에서 제작된 소자는 유사한 공진주파수 특성을 나타내었다.