• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2685-2687
• /
• 1999

This paper is concerned on developing DC-DC converter. In contrast to resonant converter, this converter requires no external resonant elements and operates with constant switching frequency. In conventional PWM converter, two MOSFET switches of the converter are simultaneously turned on and turned off. In presented converter, to achieve Zero Voltage Switching, the two legs of the bridge are operated DC-DC converter is phase shifted. Phase shifted Full Bridge ZVS PWM Converter have an effect on the power system. Operation principle and features are illustrated by the experiment results from 50W, 250kHz with MOSFET switch.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.127-132
• /
• 2001

In this paper, transmitted sound reduction performance of smart panels is studied according to different piezoelectric materials with piezoelectric shunt damping. Peizo-damping is implemented by using a newly proposed tuning method. This method is based on electrical impedance model and maximizing the dissipated energy at the shunt circuit. By measuring the electrical impedance at the piezoelectric patch bonded on a structure, an equivalent electrical model is constructed near the system resonance frequency. After shunting elements are connected to the equivalent circuit, the shunt parameters are optimally searched based on the criterion of maximizing the dissipated energy at the shunt circuit. Transmitted sound reduction performance is compared according to different piezoelectric materials with peizo-damping. Two piezoelectric materials are selected: PZT-5 and QuickPack IDE actuator. When resonant shunt circuit is considered, the use of PZT-5 exhibited the good sound reduction performance.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.268-275
• /
• 2012

Based on the standards that limit the harmonic pollution of electronic systems, the use of PFC converters is mandatory. In this paper, a new resonant bridgeless PFC converter is introduced. By eliminating the input bridge diodes, the efficiency is improved. Moreover, soft switching conditions for all of the semiconductor elements are achieved without adding any extra switches. As a result, high efficiency is attained. The proposed converter is analyzed and the theoretical and simulation results of the proposed converter are presented. In order to verify the validity of the analysis, a 40 w prototype converter is implemented and experimental results are presented. The experimental results show that high efficiency is attained while achieving a high power factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.468-470
• /
• 1995

In this paper, a series compensator with a resonant LC circuit and a shunt compensator with the resonant circuit are compared based on the respective rating of its circuit elements. The rating are calculated over a range of compensation and over a range of bus angle. The components ratings are expressed in a per unit values. The results of this study can be easily converted to actual MVA by a simple change in scale. The methodology presented to rate the various components within the system will help to determine the feasibility of various FACTS devices in costs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.195-197
• /
• 1995

In this paper, for a constant switching frequency, the configuration and the control strategy of the resonant buck-boost type converter are proposed by the combination of zero voltage switching(ZVS) and zero current switching(ZCS) with PWM method. Also, in the configuration of power control circuit, transformer is not used in the viewpoint of economy. And the circuit has fewer power switching elements than a general resonant power converter, simulation results and experiments make show the advantages mentioned.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.194-202
• /
• 2005

본 연구는 새로운 AC PDP(Plasma Display Panel)용 멀티레벨 에너지 회수회로에 관한 연구로서, 기존 멀티레벨 구동회로의 장점을 그대로 유지하면서 문제점을 해결한 새로운 멀티레벨 구동회로를 제안한다. 기존의 멀티레벨 구동회로는 Weber회로의 하드스위칭 문제를 개선하였지만 공진 인덕터에 기생공진전류가 존재하고 Vs/2유지구간이 존재한다. 제안한 회로는 기존 회로에 비해 인덕터의 수를 반으로 줄여 회로를 간단히 하고 공진 인덕터의 기생 공진전류와 Vs/2유지구간을 제거하였으며 CIM(Current Injection Method)을 사용하여 하드스위칭 문제를 해결하였다. 또한 풀브리지 구동회로에 직렬 연결된 스위칭 소자에 NPC(Neutral Point Clamping)기법을 적용하여 각 스위칭 소자에 전압이 균등하게 분배되도록 하였다. 그리고 제안회로의 동작을 모드별로 해석하였으며, PSpice 프로그램으로 시뮬레이션하고 회로를 구성하여 실험함으로써 제안한 회로의 유용성을 입증하였다.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.215-223
• /
• 2005

압전 소자는 전기적 에너지를 기계적 에너지로, 기계적 에너지를 전기적 에너지로 변환하는 물질이다. 피에조 세라믹판을 이용하여 탄성 매질을 겹쳐서 만든 벤더 엘리멘트는 전압을 가하면 변위가 발생하는 특성을 이용하여 액츄에이터로 사용할 수 있고, 반대로 변위가 생기면 전압이 발생하는 압전 현상을 이용하여 변위를 계측하는 트랜스듀서로 활용하여 탄성파 시험의 발진자와 수진기로 실내 시험에서 사용되고 있다. 벤더 엘리멘트를 이용한 탄성파 시험으로 토목재료로 많이 쓰이는 콘크리트의 강성을 측정하였고, 자유단 공진주 시험을 통하여 그 결과를 평가 하였다. 카올리나이트를 이용하여 연약지반을 모사하여 카올리나이트 슬러리의 압밀에 따른 강성 변화를 탄성파 시험을 이용하여 측정할 수 있다. 벤더 엘리멘트는 연약지반에서 전단파 계측에 탁월한 성능을 가지고 있으며, 장래에 연약지반 현장 계측에 사용될 가능성이 큰 것으로 입증되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.310-315
• /
• 2001

In this study, railway plate girder bridges are modeled in detail for finite elements within 3-dimension and analyzed by SAP 2000N, a commercial finite element analysis tool. Especially, loads of trains gained by statistical averages of measured true loads of trains are used for analysis. When the loads are adapted, the numerical dynamic responses are very close to real measurements. Resonant speed areas by train types are evaluated from the results of numerical analyses by different driving speeds of trains. For dynamic numerical analysis of railway bridges, reasonable guides are also discussed.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.23-28
• /
• 2003

In this paper, a triple-band planar antenna is proposed for the application to miniaturized automobile safety devices operating at X band(10.5 ㎓), K band(24.15 ㎓), and Ka band(34.3 ㎓). The frequency ratio between the resonant frequencies of this antenna can be adjusted from 1.99 to 2.23 for both X band and K band by varying its slit length. Parasitic elements are added on the modified slot loaded antenna to obtain the third resonance. From numerical as well as experimental results, it has been confirmed that this type of antenna is appropriate for planar multi-band antenna systems.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2041-2046
• /
• 2008

A frequency-dependent slow-wave factor (SWF) and equivalent circuit model of transmission line with defected ground structures (DGS) is described. Once S-parameters of a DGS transmission line are given, the conventional frequency -independent equivalent circuit elements are extracted using 3dB cutoff and resonant frequencies (Fc and Fo) as the first step. Using the initial equivalent elements and simple transmission line theories, a frequency-dependent equivalent transmission line model is established through an analytical method, and finally the frequency dependent SWF is calculated. The proposed equivalent circuit model and SWF are frequency-dependent and more reliable because even small insertion loss within available passband is considered, while they have been independent of frequency.