• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.533-542
• /
• 2000

Instrumentation and technologies are described for determining the vibration response characteristics of the pear with frequency range 5 to 320Hz. The computer program for controlling the vibration exciter and the function generator and for measuring the vibration response characteristics of the pear was developed. Mechanical properties such bioyield deformation, rupture deformation and apparent elastic modulus etc. were compared with the vibration response characteristics of the pear. The resonant frequency of the pear ranged from 53 to 102Hz and the amplitude at resonance was between 1.08 and 2.48g-rms. The resonant frequency and amplitude at resonance decreased with the increase of the sample mass, and they were slightly affected by mechanical properties such as bioyield deformation and rupture deformation. Regression analysis was performed among the relatively high correlated parameters from the results of correlation coefficient analysis.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.183-193
• /
• 1999

In the previous study, a module-type vibration analysis system using modular approach is developed for the purpose of analyzing the torsional vibration of vehicle driveline. In the present paper, the system is utilized to investigate the torsional vibration of the driveline of a middle duty truck. The driveline with driving condition is modeled and the torsional vibration response is simulated. The resonance 45Hz is found at engine speed 900rpm and the resultant vibration is very high. It shows favorable agreements with reference data. The effects of parameter change on torsional vibration are also investigated, so it is clarified that clutch characteristics, axle shaft stiffness are very influential on reduction of vibratio. So the countermeasure is proposed for the clutch characteristics. The reduction of torsonal vibration by 8rad/sec is obtained.

• 한국인쇄학회지
• /
• 제13권1호
• /
• pp.73-91
• /
• 1995

Spectroscopic and Photoelectric Characteristics in the Cyanine and Merocyanine Dye according to systematically change of their structures were experimentally discussed. As result, in solution, Hetero atoms(X) of Cyanine and Merocyanine dye were participated in resonance X of d obital rather than X of pobital,effected in resonance and contributed in extension of conjugated system. in solid film,new spectra,called eximer-fluorenscence,were appeared in 3-dimensional fluorenscence of high density of Cyanine dye but not of Merocyanine. The activational energy of conductivity in Merocyanine dye was lower than in cyanine, an the contrary,the drift mobility was higher and the former in photoelectric characteristics was more effec-tive than the latter. In this paper,authors invertigated the changes of dye structure by molecular obital method to confirm the results of spectroscopic and photoelectric characteristics in the Cyanine and Merocyanine Dye acco-rding to systematically cally change of their structure, and counted total energy on dihedral angle and dipol miments if dyes in S0 and S1.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.912-918
• /
• 2004

Main vibration problems of a transaxle type forklift truck are caused by the resonance of engine excitation force and natural mode shade of major components such as engine-mount system, mast, and main frame. But, it is well known that the reduction of vibration is very difficult because of the limitation of structural modifications. In this paper, the vibration characteristics of engine-mast system including engine mount were firstly identified by the experimental and simplified numerical methods. And also, the free and forced vibration characteristics of a whole forklift truck were surveyed with modal test and ODS(operation deflection shape) measurement. Based on these results, the reliable finite element model was developed. Finally, various countermeasures were considered and applied to a real forklift truck and then its effects were confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.44-47
• /
• 2005

This paper presents the efficient plan for the EMI improvement from of TFT-LCD Module. It investigates the frequency characteristics of Power/Ground Plane of TFT-LCD drive circuit PCB concretely. After the frequency characteristics is reviewed, EMI improvement is tried to insert to RC termination between Power/Ground Plane and to shift resonance frequency. It is confirmed by a simulation result and RC Termination which is inserted the point where the resonance characteristics change is necessary. It applied in 19 "SXGA TFT-LCD drive circuits and the EMI improvement verification is described.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.642-647
• /
• 2008

The boiler structure is determined by combustion characteristics and construction costs in the combustion chamber of a large commercial boiler. The heat transfer in boiler is composed of the radiation and the convection. The convective heat transfer has happened to back-pass heating surface. The combustion gas sequentially passes through the reheater tube, 1st economizer tube, and 2nd economizer tube. In case of being lowered in boiler height, we have to install additional tube bundle in back-pass heating surface for increasing the heat transfer of boiler, which causes the noise and vibration from combustion gas. When the combustion gas passes through the back-pass tube bundle in specified load of commercial boiler, this paper analyzes the acoustic characteristics between vortex-shedding frequency and natural frequency in tube bundle cavity. The case study reduce the resonance by changing natural frequency characteristics of tube-bundle cavity using a way to install ant-noise baffle in the direction of combustion gas flow.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.201-202
• /
• 2006

To analyze the dynamic characteristics of the bundle drawing process, we employed a Random Phase Spectrum method to generate stochastic test signals that had a given autocorrelation function. And the spectra of the dynamics of the process outputs were obtained, based on the dynamic model of the bundle drawing process. Results showed that the RPS method was very effective to generate stochastic signals that had an exponential function form. The drawing process had the traits that there existed a special frequency range, incurring the process resonance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.463-463
• /
• 2014

Multi-packet blade systems usually undergo multiple nozzle excitations during operation. For the design of multi-packet blade systems undergoing multiple nozzle excitations, transient characteristics around an operating frequency and resonance frequencies should be identified. In this study the equations of motion of multi-packet blade systems undergoes multiple nozzle excitations are derived. The reliability of the derived equations is verified by obtaining responses at resonance frequencies. Then, using the model, the effects of system parameters on the transient characteristics of the system are investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.270-273
• /
• 1996

This paper describes a type of piezoelectric transformer with improved design principles. It consists of a thin rectangular piezoelectric ceramic plate having two input electrodes and one output electrode. The length of each input and output electrode is nearly one third of that of piezoelectric transformer itself. In the driving section, the ceramic plate is poled in the thickness direction reversely with each other, and has electrodes on both main faces. The electric input near its fundamental resonance frequency is applied to the driving section in parallel and the output voltage from the generating section is connected to the resistor load. Its equivalent circuit is derived from the Mason\`s model. The frequency characteristics near the resonance frequency under no load have been investigated. Moreover, using this piezoelectric transformer we measured the LCD backlight characteristics.

• Journal of information and communication convergence engineering
• /
• 제2권3호
• /
• pp.149-152
• /
• 2004

In this paper, we present the film bulk acoustic resonator (FBAR) devices fabricated by considering the effects of annealing temperature on zinc oxide (ZnO) film growth characteristics. In order to determine the annealing temperature and annealing time at which the ZnO film can have good material properties, the several resonators containing ZnO layers were fabricated and annealed at various temperatures from $27^{\circ}C\;to\;300^{\circ}C$ in Ar gas ambient. The effects of the annealing temperature and annealing time on the ZnO film properties were comprehensively studied in order to further improve the resonance characteristics of FBAR resonators.