• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.704-706
• /
• 1993

This paper, introduces a Current-fed type High-Frequency Inverter with self turning devices. By replacing Thyrisors used for power source of heat treatment with high speed switching element, MOSFET in current type Inverter, the proposed Inverter makes high speed performance with several 100kHz. This paper also depicts some operating principles of the proposed circuits and general operating characteristics. Steady state solution on state variables in analysis of the proposed circuit is described generally by using normalized parameter and its characteristics depending on separate ratio(n) is also shown.

• Advances in materials Research
• /
• 제7권3호
• /
• pp.163-174
• /
• 2018

This article studies the free and forced vibrations of the carbon nanotubes CNTs embedded in an elastic medium including thermal and dynamic load effects based on nonlocal Euler-Bernoulli beam. A Winkler type elastic foundation is employed to model the interaction of carbon nanotube and the surrounding elastic medium. Influence of all parameters such as nonlocal small-scale effects, high temperature change, Winkler modulus parameter, vibration mode and aspect ratio of short carbon nanotubes on the vibration frequency are analyzed and discussed. The non-local Euler-Bernoulli beam model predicts lower resonance frequencies. The research work reveals the significance of the small-scale coefficient, the vibrational mode number, the elastic medium and the temperature change on the non-dimensional natural frequency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1005-1009
• /
• 2001

The application of the ultrasonic nozzle has been extended because it is possible atomization of liquid material. In this study, the driving characteristics of the ultrasonic nozzle on the driving circuit were investigated. And the characteristics of the ceramic oscillator were investigated for the temperature stability. The ceramic oscillator were made the Pb[(Sb$\sub$1/2/,Nb$\sub$1/2/)$\sub$0.035/-(Mn$\sub$1/3/Nb$\sub$2/3/)$\sub$0.065/- (Zr$\sub$x/Ti$\sub$l-x/)$\sub$0.9/]O$_3$with mole ratio of Zr/Ti. The ceramis oscillator were need the curie temperature of the over 300[$^{\circ}C$] for the temperature stability. When the Zr/Ti ratio was 49/51, it's curie temperature is 322[$^{\circ}C$] and the electromechanical coupling factor(k$\sub$p/) and mechanical quality factor(Q$\sub$m/) showed the values of 0.555, 1,214, respectively The resonance frequency of ceramic oscillator were from 40KHz to 45KHz. So that, the driving circuit were made a possibility that the frequency are variable. The driving current of ultrasonic nozzle showed the value of maximum 80[mA]. Also, The surface temperature of ceramic oscillator showed 80[$^{\circ}C$] at driving time 10[min]. We knew that the ultrasonic nozzle had stabile driving above 10[min.].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.671-674
• /
• 2004

This paper presents design and analysis of multi-layered ring-dot type piezoelectric transformer. These transformers are useful for step up and step down. The transformers consist of disk type multi-layered piezoelectric ceramic plates. The finite element method(FEM) was used for analysis transformer. Vibration mode, electric field and equivalent elastic strain of piezoelectric transformer were simulated by changing frequency. As results, the strain was distributed in isolation part entirely. We can get the operated in step up transformer when the inner side electrode using by input parts. Also we can get the step down transformers using by input Part as outer side electrode. The step up ratio and step down ratio was increased by decreasing inner side electrode. The resonance frequency was increased by increasing inner side electrode when the transformer was operated in step down transformer. But the step up one was decreased. From these results, we can expect to multi-layered ring-dot type piezo transformers as step up and step down transformers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.353-356
• /
• 2008

이 논문에서는 저형고의 콘크리트거더에 효율적으로 프리스트레스를 도입할 수 있는 Bi Prestressed Concrete Girder (이하 Bicon거더)의 동적 안정성을 검토하기 위한 동적 재하시험의 결과를 분석하였다. PSC거더도 단면 효율의 극대화와 더불어 형고가 낮아지고 구조물이 세장해 지므로, 동적안정성의 검토가 필수적으로 수반되어야 하며, 특히 철도교와 같이 규칙적인 반복하중을 받는 구조물의 경우에는 공진의 위험이 항상 존재하므로 구조물의 설계 과정에서 이에 대한 검토를 충분히 수행하여 사용중 공진이 발생할 가능성을 최소화 시킬 필요가 있다. 이에 대한 동적 특성치(고유진동수, 모드형상 및 감쇠율)를 실험적으로 얻기 위해 이 연구에서는 20m 철도교 시험체에 대하여 가진기를 사용한 진동시험(Forced vibration test, FVT)을 수행하여 6.632Hz의 고유진동수와 1.43%의 감쇠율을 얻었다.

• Coupled systems mechanics
• /
• 제9권4호
• /
• pp.311-323
• /
• 2020

This paper deals with the effect of the mode shapes on the dynamic response of a multi-storey frame subjected to moving train loads which are modelled as loads of constant intervals with constant velocity using the finite element method. The multi-storey frame is modelled as a number of Bernoulli-Euler beam elements. First, the first few modes of the multi-storey frame are determined. Then, the effects of force span length to beam length ratio and velocity on dynamic magnification factor (DMF) are evaluated via 3D velocity-force span length to beam length ratio-DMF graphics and its 2D projections. By using 3D and 2D graphics, the directions of critical speeds that force the structure under resonance conditions are determined. Last, the mode shapes related to these directions are determined by the time history and frequency response graphs. This study has been limited by the vibration of the frame in the vertical direction.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.51-58
• /
• 2017

The characteristics and effectiveness of double tuned mass dampers (DTMD) have been studied by many researchers. DTMD usually consists of one larger mass block and one smaller mass block. In this study, DTMD was proposed to reduce the vibration of vertical pumps in industrial plants. In order to assess the efficiency of the proposed method, numerical analysis for the simplified vertical pump model with single and double TMDs was carried out. It was also investigated that the effects of optimal TMD parameters such as frequency ratio and damping ratio on dynamic responses of the main structure. According to analysis results, DTMD are more effective to control the vibration of the vertical pump and show good robustness to the change in the stiffness of TMD.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.113-118
• /
• 2011

Many kinds of dynamic absorbers have been used to reduce the vibration of machineries and structures. In the typical ones, however low damping capacity, durability and limited install condition restrict their application. In this study, high damped dynamic absorber was proposed for diesel generator set. Developed absorber is composed with mass and coil springs. Silicone oil was filled inside the narrow gap between mass and casing. Viscous damping of silicon oil act as additional damping so that proposed dynamic absorber is suitable for D/G set which have adjacent resonance frequency to operation speed. The performance of the dynamic absorber was confirmed through the actual test on diesel engine generator set.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.5-8
• /
• 2000

The population density of excited species in dc, rf and laser ablation plume plasmas has been measured using laser absorption spectroscopy. It was shown that, when the plasma was modulated by on and off with, the sensitivity and signal to noise (S/N) ratio became high. For example, the atomic O(3$^{5}$ S$^{o}$ $_2$) Population density, No* in $O_2$/He mixtures was obtained by the highest S/N ratio at a frequency of 2.7kHz. In a 20Torr room air, the lowest No* level to be detectable was shown to be an order of 10$^{7}$ cm$^{-3}$ . The population densities of resonance Ar(1S$_2$) and Xe(1S$_4$) levels were also measured in barrier discharges and laser ablation plasmas.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.625-630
• /
• 2011

본 논문에서는 GPS(1.57~1.577 GHz)와 WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz)에서 동작하는 이중 대역 스파이럴 미앤더 모노폴 인쇄형 안테나를 설계 및 제작하였다. 하모닉 공진 주파수의 전류의 크기와 기본 공진 주파수의 전류의 크기가 다른 모노폴 끝단에 포지티브 커플링이 생기는 스파이럴 구조를 위치하여 기본 공진 주파수와 하모닉 공진 주파수의 주파수 비를 조절하였다. 또한, 선로의 간격을 조절해 커플링 영향 분석으로 주파수 비를 조절하였다. 측정 대역폭은 기본 공진 주파수에서 130 MHz(1.49~1.62 GHz), 3배수 하모닉 공진 주파수에서 330 MHz(2.29~2.62 GHz)로 나타났다. 최대 방사 이득은 GPS(1.575 GHz) 대역에서 2.86 dBi, WiBro(2.35 GHz) 대역에서 3.49 dBi, 그리고 WLAN(2.45 GHz) 대역에서 3.71 dBi로 측정되었다.