• 전자공학회논문지
• /
• 제53권11호
• /
• pp.25-31
• /
• 2016

FinFET의 기생 커패시턴스와 기생저항은 회로의 고주파 성능을 결정하는 매우 중요한 요소이다. 선행 연구에서 BSIM-CMG에 구현된 FinFET의 기생 커패시턴스와 저항 모델보다 더 정확한 압축 모델을 개발하였다. 모델의 정확도를 검증하고, FinFET으로 구현 가능한 RF 회로의 성능을 정확하게 예측하기 위해 $S_{21}$ 10dB 이상 중심 주파수 60GHz 이상을 갖는 Low Noise Amplifier (LNA) 에 설계하였다. 22 nm FinFET 소자의 압축모델에 기반한 HSPICE를 사용하여 예측한 회로 성능의 정확도를 검증하기 위해 3D TCAD simulator인 Sentaurus의 mixed-mode 기능을 사용하여 LNA를 시뮬레이션 하였다. TCAD 시뮬레이션 결과를 정확도 측정의 기준으로 삼아 10GHz~100GHz 대역에서 제안한 모델과 Sentaurus의 $S_{21}$을 비교한 결과 87.5%의 정확도를 달성하였다. 이는 기존의 BSIM-CMG의 기생성분으로 예측한 정확도가 56.5%도임에 비해 31% 향상된 정확도를 보여준다. 이를 통해 FinFET의 기생 성분 모델의 정확도를 RF 영역에서 확인하였고, 정확한 기생 저항과 커패시턴스 모델이 LNA 성능을 정확하게 예측하는데 중요한 것임을 확인하였다.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.587-593
• /
• 2006

외부전극 형광램프를 광원으로 하는 백라이트의 저항$(R_L)$과 전기용량(C), 그리고 인버터의 트랜스포머 인덕턴스(L)로 구성된 회로를 분석하였다. 램프의 저항과 전기용량은 램프에 흐르는 전류와 전압의 위상차 및 Q-V 그래프에서 결정된다. 32인치용 EEFL 램프 하나의 저항 값은 $66\;k\Omega$이고 전기용량은 21.61 pF이다. 20 개의 EEFL을 병렬 연결한 백라이트의 저항은 $3.3\;k\Omega$이고 전기용량은 402.1 pF이다. 램프 및 트랜스포머 회로에서 임피던스 매칭 주파수는 2 차 코일의 인덕턴스 $L_2$와 결합계수 k로 나타내며, $\omega_M=1/\sqrt{L_2C(1-k^2)}$ 이다. 램프 시스템의 전류와 전압은 임피던스 매칭 주파수에서 최대값을 갖는다. 이러한 해석 해의 결과는 실험 결과와 잘 일치한다.

• Agricultural and Biosystems Engineering
• /
• 제2권2호
• /
• pp.63-68
• /
• 2001

The objective of this study was to develop a real-time soil moisture meter using RF impedance. The impedance suchas capacitance and resistance (or conductance) was analyzed using parallel cylinder type capacitance probe(C-probe) and Q-meter (HP4342). The capacitance and conductance of soil increased as volumetric water content increased. The 5 MHz of modified Colpitts type crystal oscillator was designed to detect the capacitance change of the C-probe with moist soil. A third order polynomial regression model was proposed to describe the relationship between RF impedance and volumetric water content. The prototype real time moisture meter consisted of the C-probe, sample container, oscillator, frequency counter and related signal processing units. The calibration equation for measurement of volumetric moisture content of soil was developed and validated. The correlation coefficient and root mean square error between measured volumetric water content by oven method and predicted values by prototype moisture meter for unknown soil samples were 0.984 and 0.032$cm^3$$cm\^3$, respectively.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.57-64
• /
• 2013

The functional characteristic of LISN circuit, which is used for measurements of conductive noise in mains power line, is basically related to frequency characteristics of passive elements like inductors used in the circuit as well as the frequency response of inductors is highly related to the resins used in the varnishing process. The significant problem in determination of an inductor's frequency characteristic is the intrinsic resistance, inductance and parasitic capacitance. In this triplet, the parasitic capacitance is the major limiting factor of inductor's frequency range. This capacitance depends on inductor design parameters and materials filling the spaces of coil like resin and its coherency after curing process. In this paper, two similar inductors were designed and built. The first inductor was not varnished while the second one was varnished with VPI technology. VPI, or Vacuum, Pressure, Impregnation technology is one of the most reliable methods performing good insulating conditions for electrical circuits and windings based on resins. The measured results show that implying varnishing technology does not significantly affect the frequency response. However, due to mechanical solidity aspects and improved environmental protection, it is better to varnish the inductors.

• Journal of Electrochemical Science and Technology
• /
• 제2권3호
• /
• pp.152-156
• /
• 2011

A hybrid supercapacitor is fabricated using a composite material from $LiMn_2O_4$ (LMO) and activated carbon (AC) as the positive electrode and AC as the negative electrode to form the (LMO + AC)/AC system. Volume ratio (positive : negative) of electrodes is controlled to investigate of the power and energy balance. The (LMO + AC)/AC system shows better performances than the LMO/AC system. Especially, electrochemical impedance spectra, rate charge.discharge and cycle performance testing show that the (LMO + AC)/AC system have an outstanding electrochemical performance at volume ratios of (LMO + AC)/AC = 1 : 1.7 and 1 : 2. Electric double layer capacitor (EDLC) capacitance between AC of the positive electrode and AC of the negative electrode improves power density without loss of capacitance. Stable capacitance is achieved by lowering the positive electrode resistance and balancing the energy and power densities between the positive and negative electrodes by the addition of AC to the positive electrode at high current density.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.808-812
• /
• 2013

Multilayer capacitors with high ripple current and high capacitance were manufactured. The electrical properties of these capacitors were characterized for potential application for DC-link capacitors in hybrid electric vehicle inverters. Internal electrode structures were designed to achieve high capacitance and reliability. A single multilayer capacitor showed $0.46{\mu}F/cm^3$ of capacitance, 0.65% of dielectric loss, and 1450 V to 1650 V of dielectric breakdown voltage depending on the design of the internal electrode. The capacitor module designed with several multilayer capacitors gave a total capacitance of $450{\mu}F$, which is enough for hybrid electric vehicles. In particular, an equivalent series resistance of $4.5m{\Omega}$ or less will result in 60 $A_{rms}$, thereby reaching the allowed ripple current for hybrid electric vehicles.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.139-143
• /
• 1996

We report on the static and dynamic characteristics of optically modulated resonant tunneling diode oscillator (RTDO) formed in double-barrier quantum-well structure. Under the illumination of Ti:Sapphire laser, the dc current-voltage (I-V) curves of RTDO shifted towared lower voltages. This characteristic was found to odify the series resistance, negtive differential resistance, capacitance, and the inductance of the RTDO. As a result, the resonant frequency of TRDO centered at 5.302 GHz was found to decrease about 20 MHz under the laser illumination. At a constnat bias voltage, the oscillation frequency decreased linearly as the laser power was increased.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.542-543
• /
• 2014

In this paper, an estimation scheme based on an augmented sigma-point Kalman filter to estimate the state of charge (SOC) of the battery is presented, where the battery parameters of the series resistance ($R_o$), diffusion capacitance ($C_1$) and resistance ($R_1$) are also estimated through the recursive least squares (RLS) for better accuracy of the SOC. The effectiveness of the proposed method is verified by simulation results.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권1호
• /
• pp.13-21
• /
• 2004

In the design of superconducting cable systems, quench analysis have to be advanced for applying to a real systems. It is necessary to calculate the current, voltage and resistance during the quench. Simulation program named EMTDC was used to analyze the quench state. Normal zone evaluation and quench development with EMTDC are one of the major features of quench analysis. This paper presents the two kinds of quench control models which are the Switch Control Type and the Fortran Control Type. In case of the quench developing area, the simplicity cable model consist of resistance, inductance and capacitance. The impedance of the pipe type superconducting cable is calculated by numerical analysis method. The resistance and inductance increased during quench. However the variation have an effect on the fault current. The voltage was also developed by resistance and inductance. This paper presents the relationship between the current. voltage, resistance and inductance during quench.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.176-179
• /
• 1989

The optimization of the monolithic pin-FET receiver is discussed, with emphasis on the sensitivity and bandwidth. The amplifier circuit, bias resistance, total input capacitance, and transconductance of FET for the 2 Gbps transmission are calculated.