• 제목/요약/키워드: Resistance memory

검색결과 256건 처리시간 0.025초

나이티놀 스텐트 와이어의 기계적 특성 향상을 위한 초음파 나노표면 개질 처리에 대한 연구 (Application of Ultrasonic Nano Crystal Surface Modification into Nitinol Stent Wire to Improve Mechanical Characteristics)

  • 김상호;서태석;이창순;박인규;조인식;편영식;김성현
    • 한국의학물리학회지:의학물리
    • /
    • 제20권2호
    • /
    • pp.80-87
    • /
    • 2009
  • 비혈관 스텐트(식도용, 담도용, 대장용, 십이지장용, 기관지용) 재질로 가장 널리 사용되고 있는 Nitinol wire 형상기억합금의 기계적 특성 향상을 위해 초음파 나노표면 개질(UNSM) 기술을 적용하여 Nitinol wire의 상변화와 초탄성 특성 및 표면 잔류응력 등의 변화를 연구하였으며, 탄력에너지와 부식내구성을 통한 스텐트의 수명 연장방법을 연구하고자 하였다. 본 연구에 사용된 Nitinol wire는 ${\phi}1.778$ mm로 UNSM 처리 전후의 표면거칠기 값은 Ra=0.092${\mu}m$와 Ra=0.093${\mu}m$로 비슷 하였지만, 초기시편에서는 미세결함과 인발가공 흔적이 확연히 관찰되었으나, UNSM 후에는 인발가공 흔적과 미세 표면 결함은 사라진 것이 발견되었다. 또한 잔류응력 측정 결과, 초기 시험편에는 +3.65 MPa였으나 UNSM 처리 후에는 -4.09 MPa로 확인되었으며, XRD를 통한 결정구조 분석 결과 $42.28^{\circ}$에서 초기보다 약한 (110) 오스테나이트 피크가 관찰되었으며, 대신 (020), ($1{\overline{1}}1$), 그리고 (021) 피크가 명확히 Martensite (B19' Monoclinic lattices) 구조로 확인되었고, (300)의 R상 (Rhombohedral lattices)에 대한 추가 피크가 미비하게 관찰되었다. 탄성변형에 따른 에너지 흡수력과 하중 제거에 따른 에너지의 회복력인 탄력계수(modulus of resilience) $U_r$은 단위체적당 변형률 에너지로 4.31 $MJ/m^3$에서 5.85 $MJ/m^3$로 증가하였다. 이와 같이 표면결함 제거와 인장응력을 압축응력으로 재편성하는 것만으로도 피로내구성을 크게 향상시킬 수 있다고 사료되며, 생체적합성과 더불어 내부식성, 내마모성 및 내구수명 향상을 실용화할 수 있는 표면개질 장치가 개발된다면, 현재 한국인 사망원인 1위인 순환계 질환(심근경색, 뇌졸중 등)에 사용되는 혈관계통의 스텐트 개발에도 응용개발연구가 가능할 것으로 예상된다.

  • PDF

저잡음 · 고신뢰성 Differential Paired eFuse OTP 메모리 설계 (Design of Low-Noise and High-Reliability Differential Paired eFuse OTP Memory)

  • 김민성;김려연;학문초;하판봉;김영희
    • 한국정보통신학회논문지
    • /
    • 제17권10호
    • /
    • pp.2359-2368
    • /
    • 2013
  • 본 논문에서는 power IC에서 파워가 ON되어있는 동안 입력 신호인 RD(Read) 신호 포트에 glitch와 같은 신호 잡음이 발생하더라도 파워-업(power-up)시 readout된 DOUT 데이터를 유지하면서 다시 읽기 모드로 재진입하지 못하도록 막아주는 IRD(Internal Read Data) 회로를 제안하였다. 그리고 pulsed WL(Word-Line) 구동방식을 사용하여 differential paird eFuse OTP 셀의 read 트랜지스터에 수 십 ${\mu}A$의 DC 전류가 흐르는 것을 방지하여 blowing 안된 eFuse 링크가 EM(Electro-Migration)에 의해 blowing되는 것을 막아주어 신뢰성을 확보하였다. 또한 program-verify-read 모드에서 프로그램된 eFuse 저항의 변동을 고려하여 가변 풀-업 부하(variable pull-up load)를 갖는 센싱 마진 테스트 기능을 수행하는 동시에 프로그램 데이터와 read 데이터를 비교하여 PFb(pass fail bar) 핀으로 비교 결과를 출력하는 회로를 설계하였다. $0.18{\mu}m$ 공정을 이용하여 설계된 8-비트 eFuse OTP IP의 레이아웃 면적은 $189.625{\mu}m{\times}138.850{\mu}m(=0.0263mm^2)$이다.

PoRAM의 4bit 셀 어레이 구조와 이를 동작시키기 위한 센싱 기법 (The 4bit Cell Array Structure of PoRAM and A Sensing Method for Drive this Structure)

  • 김정하;이상선
    • 대한전자공학회논문지SD
    • /
    • 제44권6호
    • /
    • pp.8-18
    • /
    • 2007
  • 본 논문에서는 PoRAM의 4bit 셀 어레이 구조와 이를 동작시키기 위한 센싱 방법에 대해서 연구하였다. PoRAM은 기존의 SRAM이나 DRAM과는 다른 동작을 취한다. PoRAM 소자의 상단전극과 하단전극에 전압을 가했을 때 저항 성분 변화에 따른 셀에 흐르는 전류를 측정하여 상태를 구분한다. 셀 어레이의 새로운 어드레싱 방법으로, 행-디코더는 "High", 열-디코더는 "Low"로 선택하여, 셀에 해당하는 전류가 워드라인에서 비트라인으로 흐르게 하였다. 이때 흐르는 전류를 큰 값으로 증폭시켜 원하는 값을 얻고자 전압 센스 앰플리파이어를 사용한다. 이는 전압 센싱 방법인 전류 미러를 이용한 1단 차동 증폭기를 사용한다. 전압 센스 앰플리파이어에서 증폭을 시켜주기 위해 셀에서 측정된 전류 값을 전압 값으로 변환시켜주는 장치가 필요하다. 1단 차동 증폭기 입력 단에 소자 저항인 diode connection NMOS을 달아주었다. 이를 사용함으로써 전류 값과 저항 값의 곱으로 나타내어진 입력값(Vin)과 기준전압(Vref)을 비교하여 지우기 상태일 경우에는 "Low", 쓰기 상태일 경우에는 "High"로 증폭되는 것을 확인했다.

애니메이션에서 주인공의 무의식을 통해 바라본 자아성장에 대한 연구 -<센과 치히로의 행방불명>과 <코렐라인>의 비교분석을 중심으로 (Leading Character's Unconsciousness-oriented Self-growth in Animations - Focusing on a Comparative Analysis of and -)

  • 정민영;김재웅
    • 만화애니메이션 연구
    • /
    • 통권37호
    • /
    • pp.287-306
    • /
    • 2014
  • 사람의 마음에는 본인이 알고 있는 '의식 있는 부분'과, 분명하게 의식되지 않은 부분, 즉 '무의식의 부분'이 있다. 자아란 의식과 무의식 모두를 지칭한다. 자아의 성장이란 무의식이 지닌 잠재된 욕구와 저항들을 본인 스스로 올바로 마주하며, 의식과 함께 조화로운 균형과 통합을 유지하는 능력이다. 그런 면에서 캐릭터의 무의식에 대한 탐구는 내적심리를 통한 원래의 자아의 모습을 조망하고 변화와 성장하는 모습을 파악할 수 있는 중요한 방법이다. 비교 분석 대상인 두 작품 <센과 치히로의 행방불명>과 <코렐라인>에서 주인공과 관련된 내외적 요소들은 상당부분 유사하다. 평소 부모의 영향력 안에 머물던 두 소녀 주인공은 부모의 갑작스런 사라짐과 함께 새롭고 낯선 환경을 맞게 된다. 둘은 모두 그 곳에서의 모순되고 불합리한 상황들에 저항하며 모든 것을 다시 제자리로 되돌리고자 험난한 모험을 수행한다. 흥미롭게도 두 인물은 유사한 무의식적 특징을 하고 있지만, 인물이 겪게 되는 여정과 자세, 내적자아의 변화는 서로 다른 경로를 선택하고 있다. 본 연구는, 두 주인공이 지니는 무의식의 구체적 근원과 행동요소들의 분석과 역할, 그리고 작품전체에 미치는 영향들에 대한 비교분석연구이다. 그 결과는 캐릭터 구축에 필요한 요소로 적용되며, 캐릭터의 무의식적 심리에 가장 잘 부합하는 상황과 사건을 연계하여 이야기의 개연성과 설득력을 높일 수 있다는 본 연구의 가설을 입증하게 된다.

바이오 상변화 Template 위한 전극기판 개발 (Developing the Electrode Board for Bio Phase Change Template)

  • 리학철;윤중림;이동복;김수경;김기범;박영준
    • Korean Chemical Engineering Research
    • /
    • 제47권6호
    • /
    • pp.715-719
    • /
    • 2009
  • 본 연구에서는 DNA 정보를 상변화 물질의 전기저항 변화특성으로 검출할 수 있는 상변화 전극 기판을 개발하였다. 이를 위해 반도체 공정에서 사용하는 Al을 사용하여 전극 기판을 제작하였다. 하지만 주사전자현미경을 이용하여 Al 전극의 단면 상태를 확인해 본 결과 PETEOS(plasma enhanced tetraethyoxysilane) 내에서 보이드(void)가 발생하여 후속공정인 에치백과 세정공정 분위기에 과도하게 노출되어 심하게 손상되어 전극과 PETEOS 사이에 홀(hole)로 변형된다. 이 문제점을 해결하기 위하여 에치백 및 세정 공정을 진행하지 않으면서 $Ge_2Sb_2Te_5$(GST) 박막의 단차피복성(stepcoverage)을 좋게 할 수 있고, 열역학적으로 GST 박막과의 반응성을 고려했을 때 안정적이면서 비저항이 낮은 TiN 재료를 사용하여 상변화 전극 기판을 제작하였다. 주사전자현미경을 통하여 전극의 단면의 상태를 관찰하였으며 TiN 전극과 GST 박막이 정상적으로 연결되어 있는 것을 확인하였다. 또한 저항측정 장비를 사용하여 TiN 상변화 전극 기판 위에 증착된 GST의 비정질과 결정질의 저항을 측정하였고, GST의 비정질과 결정질저항의 차이는 약 1,000배 정도로 신호를 검출하는데 충분함을 확인하였다.

PLT(10) 박막의 Switching 특성에 관한 연구 (A Study on the Switching Characteristcs of PLT(10) Thin Films)

  • 강성준;장동훈;윤영섭
    • 전자공학회논문지D
    • /
    • 제36D권11호
    • /
    • pp.63-70
    • /
    • 1999
  • PLT(10) 박막을 $Pt/TiO_2/SiO_2/Si$ 기판 위에 sol-gel법으로 제작하여, 상부전극의 면적과 외부인가 펄스전압 및 부하저항을 변화시켜 가며 비휘발성 메모리 소자에 응용하기 위해 필수적인 switching 특성을 조사하였다. 외부인가 펄스전압이 2V에서 5V 까지 증가함에 따라, switching time은 $0.49{\mu}s$에서 $0.12{\mu}s$로 감소하였으며, 인가된 펄스전압에 대한 switching time의 관계로부터 구한 활성화 에너지 ($E_a$)는 209 kV/cm이었다. 상부전극 면적이 $3.14{\times}10^{-4}cm^2$인 박막에서 이력곡선과 polarization switching 실험으로부터 구한 switched charge density는 5V에서 각각 $11.69{\mu}C/cm^2$$13.02{\mu}C/cm^2$으로 양쪽 값 사이의 오차는 약 10%로 비교적 잘 일치하는 경향을 나타내었다. 상부전극의 면적이 $3.14{\times}10^{-4}cm^2$에서 $5.03{\times}10^{-3}cm^2$으로 증가함에 따라, switching time이 $0.12{\mu}s$에서 $1.88{\mu}s$로 증가하였으며, 부하저항을 50${\Omega}$에서 3.3$k{\Omega}$으로 증가시킴에 따라 switching time은 $0.12{\mu}s$에서 $9.7{\mu}s$로 증가로 증가하였다. 이와 같은 switching 특성에 관한 연구를 통해 PLT(10) 박막이 비휘발성 메모리 소자에 응용될 수 있는 매우 유망한 재료임을 알 수 있다.

  • PDF

플래시 메모리를 위한 파일 시스템의 구현 (Implementation of a File System for Flash Memory)

  • 박상호;안우현;박대연;김정기;박승민
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제7권5호
    • /
    • pp.402-415
    • /
    • 2001
  • 플래시 메모리는 기존의 회전식 자기 매체에 비해서 속도가 빠르고, 충격에 강한 장점이 있다. 이런 특성으로 인해 기존의 가전, 통신 기기, 휴대 기기에서 저장매체로써 플래시 메모리의 사용이 증대하고 있고, 더불어 저장 매체로 플래시 메모리를 사용한 파일 시스템의 필요성도 증가하고 있다. 저장 매체로써 플래시 메모리는 위와 같은 장점 외에 두 가지 문제점을 가지고 있다. 첫째, 데이타를 덧쓸 수가 없다는 점이다. 데이타를 덧쓰기 위해서는 데이타를 저장하기 전에 플래시 메모리를 지워야 하는데, 지우는 작업은 1초 정도의 시간이 소요된다. 따라서, 플래시 메모리에 저장된 데이타를 수정할 때, 시간이 오래 걸리게 되는데, 본 논문에서는 기존의 LFS(Log-structured File System) 방식으로 데이타를 저장하여 이와 같은 문제점을 해결하였다. 플래시 메모리의 두 번째 문제점은 수명이 제한되어 있다는 점이다. 본 논문에서는 cleaning policy를 통하여 수명을 최대한 연장시킬 수 있도록 하였다. 본 논문에서 구현한 플래시 파일 시스템은 소용량 저장 매체에 적합한 FAT를 사용하여 성능을 향상시켰고, FAT를 구현할 EO 발생할 수 있는 문제점을 해결하였다. 또한, 차례 쓰기, 무작위 쓰기의 실험을 통해서 성능을 분석하였다.

  • PDF

Carbon-induced reconstructions on W(110)

  • 김지현;;;김재성
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.362-362
    • /
    • 2010
  • Today, vast attention has been paid to periodic arrays of nanostructures due to their potential for applications such as memory with huge storage density. Such application requires large-scale fabrication of well ordered nano-sized structures. One of the most widely used methods for the ordered nanostructures is lithography. This top-down process, however, has the limit to reduce size. Here the promising alternative is the self-organization of ordered nano-sized structures such as large scale 2d carbon-induced reconstructions on W(110). In the present study, we report on the first well-resolved atomic resolution STM studies of the well-known R($15{\times}3$) and R($15{\times}12$) carbon induced reconstruction of the W(110). From the atomic image of R($15{\times}3$) for different values of tunneling gap resistance, we can tell there are no missing atoms in unit cells of R($15{\times}3$) and some atomic displacements are substantial from the clean W(110), even though not all the imaged position of atoms correspond to tungsten, but may include those of carbon. We are considering two cases; First case is related to lattice deformation, or top layer of W(110) is deformed in the process of relief of strain caused by random inserting of carbon atoms possibly in the interstitial position. In the second case, R($15{\times}3$) unit cell results from a coincidence lattice between clean W(110) substrate and tungsten carbide overlayer which has rectangular atomic arrangement and giving R($15{\times}3$) coincidence lattice. beta-W2C showing rectangular unit cell should be a candidate. Further, we report on new reconstructions. Unlike the well-known R($15{\times}12$) consisting of two parts, two inner structures between two "Backbone" structures. The new reconstruction, which we found for the first time, contains more parts between the "Backbone"s. Sometimes we can observe the reconstruction consists of only inner parts without "Backbone" parts. Thus, the observed reconstruction can be built by constructing of two types of "Lego"-like block. Moreover, the rectangle shape of "Backbone" transform to parallelogram-like shape over time, the so-called wavy-R($15{\times}12$). Adsorption of hydrogen can be the reason for this transformation.

  • PDF

박물관의 정치학: 인도네시아 국립박물관에 표상된 오리엔탈리즘 연구 (Museum Politics: A Study of Orientalism as Represented in the National Museum of Indonesia)

  • 송승원
    • 동남아시아연구
    • /
    • 제21권1호
    • /
    • pp.137-184
    • /
    • 2011
  • This article is aimed at understanding the political narratives represented in the National Museum of Indonesia. Starting initially as a colonial museum, the National Museum of Indonesia functioned as a useful tool for the Dutch colonial force to fuel its imaginations of the colonial territory and the people within it. The Dutch used the cultural display to advertize its benevolent colonial rule. All the while, the museum also inevitably reflected orientalism on the people and the culture of the colony. The republic of Indonesia inherited the colonial museum's practices and its display patterns. The business surrounding the museum also played a key role in the newly-born nation-state laying out a future for its redefined territory and people. Thus, what the colonial force imagined for the colonial territory through the study of museum displays was rather directly transferred to the republic without serious consideration of the decolonization process. Four main characteristics have been seen in the museum displays. The first is an emphasis on the glorious Hindu-Buddha history, from which numerous temples, statues, and jewelry have been found. Secondly, the Islamic period, which spanned between the Hindu-Buddha times to the colonial era, has almost completely been eliminated from the display. Third, the colonial era has been depicted as the time of Europe's exportation of scientific tools and adaption of sophisticated living patterns. Fourth, the images of ethnic groups were represented as being stagnant without reflecting any challenges and responses that these groups had faced throughout history. Looking at these display patterns, it can be concluded that all the dynamic internal developments and anti-colonial resistance that took place during the Islamic and Colonial Era have simply not been represented in the museum display. These display patterns do not reflect the real history or culture of the archipelago. Two considerations are thought to have influenced the neglecting of social realities in the display. The first of which is the Dutch's and Republic's apprehension over the possible political upheaval by the Islamic forces. Yet, more fundamentally, cultural displays themselves are distinct from historical education in that the former pays more attention to business ideas with an aim to attract tourists rather than to project objective historical knowledge. Thus, in cultural displays, objects which work to stimulate fantasies and spur curiosity on archipelagic culture tend to be selected and emphasized. In this process, historical objectivity is sometimes considered less vital. Cultural displays are set up to create more appealing narratives for viewers. Therefore, if a narrative loses its luster, it will be replaced by another flashy and newly-resurrected memory. This fact reveals that museums, as transmitters of historical knowledge, have a certain degree of limitation in playing their role.

경량 블록 암호 PIPO의 MILP-Aided 디비전 프로퍼티 분석 및 인테그랄 공격 (MILP-Aided Division Property and Integral Attack on Lightweight Block Cipher PIPO)

  • 김제성;김성겸;김선엽;홍득조;성재철;홍석희
    • 정보보호학회논문지
    • /
    • 제31권5호
    • /
    • pp.875-888
    • /
    • 2021
  • 본 논문에서는 경량 블록 암호 PIPO에 대한 인테그랄 구별자(integral distinguisher)을 탐색한 결과를 통해 8-라운드 PIPO-64/128에 대한 키 복구 공격을 수행한다. ICISC 2020에서 제안된 경량 블록 암호 PIPO는 고차 마스킹 구현을 고려한 설계를 통해 부채널 공격에 대한 저항성을 갖는 효율적인 구현이 가능하다. 동시에 차분 분석, 선형 분석 등의 다양한 분석법을 적용하여 PIPO의 안전성을 보였다. 그러나 인테그랄 공격에 대해, 5-라운드 이상의 인테그랄 구별자가 존재하지 않을 것이라고 제안되었을 뿐 인테그랄 공격에 대한 안전성 분석은 현재까지 수행된 바 없다. 본 논문에서는 MILP 기반 Division Property를 통해 PIPO에 대한 인테그랄 구별자를 탐색하는 방법을 제시하고, 기존의 결과와 달리 6-라운드 인테그랄 구별자가 존재함을 보인다. 뿐만 아니라, PIPO의 라운드 함수 구조를 활용하여 입출력에 대한 선형 변환을 고려하는 인테그랄 구별자 탐색 방법을 통해 총 136개의 6-라운드 인테그랄 구별자를 제시한다. 마지막으로, 획득한 6-라운드 인테그랄 구별자 중 4개를 이용하여 2124.5849의 시간 복잡도와 293의 메모리 복잡도를 가지는 8-라운드 PIPO-64/128 키 복구 공격을 제안한다.