• 한국식품과학회지
• /
• 제47권2호
• /
• pp.149-157
• /
• 2015

본 연구는 압출성형 된 옥수수 섬유질로부터 화학적 추출을 통해 SAX와 CFG 수율을 향상시키기 위해 반응표면분석법을 이용하여 최적의 압출성형조건을 확립하였다. 압출성형공정 조건 중 수분함량($X_1$), 스크루 회전속도($X_2$), 배럴온도($X_3$)를 독립 변수로 하고 옥수수 섬유질의 residual solid, final solution, 그리고 CFG의 수율과 각각의 SAX값을 종속 변수로 하여 화학적으로 추출 하였다. 그 결과, 수율의 경우 final solution은 EDCF가 DCF보다 낮은 경향을 보였고, residual solid와 CFG의 경우, EDCF가 DCF보다 높은 경향을 나타내었다. SAX값은 모든 조건의 EDCF가 DCF보다 높은 경향을 나타냈다. 각각의 결정된 최적의 압출성형 조건에서 분석한 결과 모든 조건에서 예측값과 결과값이 유사하여 반응표면 분석의 결과가 양호한 것으로 나타났다. 이상의 연구결과에서 반응표면 분석법이 압출성형 공정에 의한 CFG의 수율과 총 SAX값의 최적화를 위한 적절한 방법 중 하나라는 것을 보여주었다.

• 자원리싸이클링
• /
• 제10권5호
• /
• pp.36-43
• /
• 2001

The chlorine component in fly ash from municipal solid waste incineration ash was removed by water washing for the purpose of recycling fly ash as a raw material of ordinary portland cement. The samples were a different kind of 리y ashes using $Ca(OH)_2$and NaOH as media of wet scrubber for flue gas cleaning. The content of soluble salts of fly ash using $Ca(OH)_2$and NaOH was 32.8%, 50.1% and the content of chlorine component, 22.9% and 26.0% respectively, which was KCl, NaCl, CaC1OH mainly. When each fly ash was washed using water under conditions of a agitation speed of 300 rpm, a liquid to solid ratio of 10, most soluble salts in fly ash were dissolved within 30 minutes and the content of chlorine component in ash was diminished to the content of 4.4%, 2.O% at $20^{\circ}C$ and 1.7%, 0.8% at $50^{\circ}C$ respectively. And the main compound of residual chlorine component in ash after water washing was friedel`s salt ($3CaO.A1_2$$O_3$.$CaCl_2$.$10H2$O). From analysis results of water quality for wastewater by water washing, the components exceeding discharged wastewater standard were only Pb and Cd. But As pH was controlled to 10 with addition of $CO_2$(g) or $Na_2$$_CO3$in water, the concentration of heavy metals such as Pb and Cd was also under discharged wastewater standard.

• Journal of Pharmaceutical Investigation
• /
• 제34권4호
• /
• pp.289-297
• /
• 2004

Acyclovir (ACV) is one of the most effective and selective agents against viruses of the herpes group. Because of low solubility, bioavailability of ACV has shown below 30% with oral dosage form. In our previous study, we reported that the fabrication of solid dispersion of ACV was possible and the solid dispersion of ACV and PVP was the most useful in all samples. In this study, we examined the effect of mixture ratio of polymers (PEG and PVP) to ACV. Solubility of ACV was dramatically increased up to 25 mg/ml in $80^{\circ}C$ distilled water. So water was used as a solvent to eliminate problem of residual solvent. Spray drying method was used for the solid dispersion of ACV as solvent extraction. Different scanning calorimeter was used to check degradation of drug. Polymer carriers were PEG 6,000 and PVP. In summary, ACV-PVP (1:3) showed the best solubility in distilled water.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.8-16
• /
• 2017

고체 추진기관이 노즐마개에 의해 외기와의 교환이 완벽히 차단된다면, 구조적 안정성은 제작초기 조건인 내부조성간의 잔류반응(Post Cure, Migration etc.), 그리고 자유공간 내의 산소(또는 산화방지제)와 습기(제습제)와의 반응에 종속된다. 이로부터 발생하는 혼합형 고체추진제의 기계적 특성은 매우 복잡하며, 추진기관은 발사직전까지 일교차/년교차의 끊임없는 열하중을 받게 된다. 본 연구에서는 고체 추진기관의 제조공정인 성형오븐에서 출고 후 저장안정화까지의 거동을 고체추진제의 열유변학적 단순특성을 적용하여 신속하게 산출할 수 있는 방법을 제시하였다. 이를 위해 온도제어 가능한 Endurance Test 장치를 고안 제작하였으며, 추가적으로 점진적 응력과 변형율 증가에 따른 비선형 특성도 검토한다.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.79-88
• /
• 2017

The effect of residual metallic sodium on the solidification cracking susceptibility of type 316FR stainless steel was investigated via transverse-Varestraint tests. And a solidification brittle temperature range (BTR) of type 316FR stainless steel was 37 K. However, the BTR expanded from 37 to 67 K, as the amount of metallic sodium at the specimen surface increased from 0 to $7.99mg/cm^2$. Microstructural observation of the weld metal suggested that metallic sodium existed in the weld metal, including in the cell boundaries, during welding solidification. Thermodynamic calculations suggested that sodium expanded the temperature range of solidliquid coexistence during welding solidification of the steel weld metal. Therefore, the increased solidification cracking susceptibility (i.e., expansion of the BTR) in the residual sodium environment was attributed to enhanced segregation of sodium during the welding solidification; this segregation, in turn, resulted in an expanded temperature range of solid-liquid coexistence.

• 분석과학
• /
• 제15권1호
• /
• pp.67-71
• /
• 2002

Imidzole계 살균제 prochloraz의 토양(미사질식토) 잔류량 및 반감기를 전자포획검출기를 이용한 기페크로마토그래피로 분석하였다. 토양시료는 acetone/hexane (1:1) 용매로 추출하였고, $LC-NH_2$ Sep-Pak 고체컬럼으로 분리하였다. 표준검정곡선의 감응함수는 0.05~1.00 ng 범위에서 Y = 268.8600X + 0.0664, $R^2=0.9998$ 이었다. 검출한계는 0.02 mg/mL 이었고, 회수율은 0.10 mg/L의 경우 97.3%, 0.40 mg/L의 경우 94.5% 이었다. 반감기는 실내토양에서 24.4일, 포장토양에서 7.6일 이었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.553-556
• /
• 2008

We hereby report novel driving scheme to eliminate effect of "residual" image sticking (RRI) problem which arises due to hysteresis problem in Thin Film Transistor (TFT) in AMOLED Displays. The driving scheme applies "black" voltage after every data voltage period in order to drive AMOLED in uni-direction. The system can be easily implemented with 120 Hz driving scheme which is well matured in AMLCD industries. Our analyses show systematic evaluation of the problem and thereby solving it by simple methods which will be significantly effective of driving OLED towards mass manufacturing stage.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.713-719
• /
• 2005

SPME (Soild phase microextraction) has been used in the analysis of many volatile organic compounds, such as geosmin and 2-methylisoborneol (2-MIB), trihalomethanes (THMs) in drinking water. SPME fiber is characterized by high adsorption capacity (DVB/CAR/PDMS, DVB/PDMS etc.). Although the highly active adsorption capacities of the SPME fiber are often to the chemical functional group, surface properties play a significant role in determining the surface adsorption capacities. The objectives of this study were to evaluate effect of residual chlorine on analysis of geosmin and 2-MIB. Image taken by SEM before preloaded with chlorine, the surface and porous media was almost perfect spherical shape and no clogging of pores. However, after preloaded with chlorine the surface was aggregated and pore was blocked. The recovery rate of geosmin and 2-MIB coexisting with chlorine was reduced by 35 to 62%. The recovery rate with preloaded with chlorine was reduced by 25 to 43%. The lower concentration of geosmin and 2-MIB and the higher concentration of chlorine existed in water, the lower the recovery rate was.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.863-868
• /
• 2001

The present study was carried out to investigate the effect of MA processing variables on the microstructural properties of composite powders and the coefficient of thermal expansion of pulse electric current sintered AlN-Cu powder compacts. The AlN-Cu powders had a size of less than 15 $\mu\textrm{m}$ with 25 nm size of copper crystallite after MA 32 hours. The finely distributed AlN-Cu powder compacts were completely achieved after PECS. The residual oxygen was considerably removed after hydrogen reduction treatment. The residual carbon was completely removed to 97%. The CTE of AlN-Cu powder compacts showed a good consistency with Kingery-Tuner model when the volume fraction of copper was less than 60%. When it was more than 60%, the CTE had a good agreement with Series model.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.275-282
• /
• 2021

Failure mechanism which can affect geotechnical infrastructures (shallow foundations, retaining walls, and piles) constitutes one of the most encountered problems during the design process. In this respect, the shear behavior of interfaces between grained soils and solid building materials, as well as those between cohesive soils should be investigated. Therefore, a range of ring shear tests with different cohesive soils and stainless-steel interfaces have been carried out through the Bromhead apparatus that allows simulating large displacements along a failure surface. The effects of steel rings roughness and soil type on the residual friction coefficient and the shear zone features (structure, thickness, and texture orientation angle) have been investigated using the Scanning Electron Microscopy. The obtained results indicate that the residual friction coefficient and the structural characteristics of the shear zone vary according to the surface roughness and the soil type. Scanning electron microscopy reveals that the particles inside the shear zone tend to be re-oriented. Also, the shear failure mechanism can be identified along with the interface, within the soil, or simultaneously at the interface and within the soil specimen.