• Laser Solutions
• /
• v.11 no.3
• /
• pp.5-9
• /
• 2008

The effect of a laser peening on the surface residual stress of SUS 304 was investigated using a second harmonic Nd:YAG laser beam. The energy density and the diameter of the laser beam were $400mJ/mm^2$ and about 1mm, respectively. According to the test results, the effect of a laser peening for improving the surface residual stress was not big enough to induce a high compressive stress on the SUS 304 surface. This is thought to be attributed to the small radius of the laser beam used in this study, even though its energy density is big enough. From this study, it can be concluded that to induce a recognizably high compressive stress on a metal surface, the energy density as well as the size (diameter) of the laser beam should be large enough to generate surface plasma with a high energy to have a big impact to a metal surface.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.3
• /
• pp.89-94
• /
• 2005

We investigate the reaction stability of cobalt and nickel with side-wall materials of $SiO_2\;and\;Si_3N_4$. We deposited 15nm-Co and 15nm-Ni on $SiO_2(200nm)/p-type$ Si(100) and $Si_3N_4(70 nm)/p-type$ Si(100). The samples were annealed at the temperatures of $700\~1100^{\circ}C$ for 40 seconds with a rapid thermal annealer. The sheet resistance, shape, and composition of the residual materials were investigated with a 4-points probe, a field emission scanning electron microscopy, and an AES depth profiling, respectively. Samples of annealed above $1000^{\circ}C$ showed the agglomeration of residual metals with maze shape and revealed extremely high sheet resistance. The Auger depth profiling showed that the $SiO_2$ substrates had no residual metallic scums after $H_2SO_4$ cleaning while $Si_3N_4$ substrates showed some metallic residuals. Therefore, the $SiO_2$ spacer may be appropriate than $Si_3N_4$ for newly proposed Co/Ni composite salicide process.

• Journal of the korean society of oceanography
• /
• v.35 no.4
• /
• pp.179-191
• /
• 2000

Both acid-leached and residual Pb in surface sediments of the Yellow Sea are analyzed in order to explain the spatial distribution of Pb contents and to determine a major controlling factor of its geographical distribution. Leached and residual Pb contents in surface sediments, which may have a different origin, show mirrored geographical distribution. Sediments with high residual Pb ( ${\sim}$20 ${\mu}$g/g; northeastern sand) contain low leached Pb (6-8 ${\mu}$g/g) while sediments with high leached Pb ( ${\sim}$20 ${\mu}$g/g; central mud) contain low residual Pb. As a result, total Pb shows little variation spatially. The mirrored distribution of both species also leads the grain-size dependence of Pb contents to be unclear although the grain-size dependence of other trace metals (Cr, Co, Ni etc.) has been well reported in this shelf. High leached Pb contents (>15 ${\mu}$g/g) were also observed in sediments off the Changjiang River mouth and off the Kyunggi Bay where they can be interpreted as the results of diagenetic accumulation and anthropogenic pollution, respectively. Residual Pb enriched in sands of the northeastern area might be from K-feldspar, which in turn allows the suggestion that northeastern sands may have originated from coastal erosion of granitic landmass or directly from nearby rivers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.33-41
• /
• 2001

Enormous volumes of mining wastes from the abandoned and closed mines are disposed without a proper treatment in the upper Okdong River basin at Southeastern part of Kangwon Province. Erosion of these wastes contaminates soil, surface water, and sediments with heavy metals. Objectives of this research were to fractionate heavy metals in the mine tailing stored in the Sangdong Tungsten tailing dams and to assess the potential pollution index of each metal fraction. Tailing samples were collected from tailing dams at different depth and analyzed for physical and chemical properties. pH of tailings ranged from 7.3 to 7.9. Contents of total N and organic matter were in the ranges of 3.2~5.5%, and 1.3~9.1%, respectively. Heavy metals in the tailings were higher in the newly constructed tailing dam than those in the old dam. Total concentrations of metals in the tailings were in the orders of Zn > Cu > Pb > Ni > Cd, exceeded the corrective action level of the Soil Environment Conservation Law and higher than the natural abundance levels reported from uncontaminated soils. Relative distribution of heavy metal fractions was residual > organic > reducible > carbonate > adsorbed, reversing the degree of metal bioavailability. Mobile fractions of metals were relatively small compared to the total concentrations. Distribution of metals in the tailing dam profiles was metal specific. Concentrations of Cu at the surface of tailing dams were higher than those at the bottom. Pollution index (PI) values of each fraction of metals were ranged from 4.27 to 8.51 based on total concentrations. PI values of mobile fractions were lower than those of immobile fractions. Results on metal fractions and PI values of the tailing samples indicate that tailing samples were contaminated with heavy metals and had potential to cause a detrimental effects on soil and water environment in the lower part of the stream. A prompt countermeasure to prevent surface of tailings in the dams from water and wind erosions is urgently needed.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.178-182
• /
• 2017

Good Agricultural Practices (GAP) is the world's leading quality certification for food safety. Since its introduction in Korea in 2006, its importance has been increasing every year. In particular, food safety issues are becoming increasingly important in society, and food safety is directly linked to health. The core of GAP certification is the traceability of the production, distribution, and consumption of hazardous materials, including pesticide residues, heavy metals, and microbes. In the present study, pesticides and heavy metals in button mushroom (Agaricus bisporus) and associated cultivation materials were analyzed. Tricyclozole (0.0144 ppm), flubendiamide (0.147 ppm), and trifloxystrobin (0.0340 ppm) were detected in rice straw and wheat straw, and carbendazim (0.0142 ppm) was detected in mixed wheat straw and rice straw medium. Lead and cadmium were detected at levels higher than the standard level in rice straw and mixed medium. However, lead and cadmium were not detected in mushrooms, and levels of arsenic and mercury were below the safety limit. Therefore, it was confirmed that the residual pesticides and heavy metals are safely managed in the investigated mushroom species. The results of the present study suggest that if these materials are adequately managed in the surroundings during cultivation, all hazardous materials can be managed during mushroom production.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.155-163
• /
• 2014

Total concentration and chemical speciation of trace metals (Cu, Pb, Zn, Cd, and Ni) were determined to evaluate pollution level and potential ecological risk in surface sediments of the Masan Bay. The results showed that the trace metal concentrations, except for Ni, were high in the inner Masan Bay. Based on the chemical speciation of metals in sediments, the percentage of total concentrations of Cd and Pb in non-residual fraction was 92% and 88%, respectively, indicating that these metals originated mainly from anthropogenic sources. However, Ni (70%) was dominant in residual fraction. Pollution load index (PLI) and ecological risk index (ERI) values in the inner bay indicate the presence of anthropogenic pollution and considerable-moderate ecological risk, respectively. Ecological index (Ei) value for Cd was high at most stations in the Masan Bay, and Cd content was the highest in acid soluble fraction, which presents the highest ecological risk. The results obtained in this study indicate that Cd presents a high potential ecological risk to benthic biota in the Masan Bay.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.469-475
• /
• 2014

The study investigated the physicochemical characteristics and the ecological risk of the Northport sediment in B city and the releasing properties of heavy metals into seawater during the resuspension also studied. The major components of the sediment are fine silt and clay which contains high organic matter and AVS (Acid volatile sulfide) and the ecological risk of the heavy metals in sediment also very high. The release rate of heavy metals into seawater was in order of Pb>>Cu>Cr>>Zn>Cd during the resuspension in a batch experiment, and the heavy metal release mainly attributed to the oxidation of metal sulfides. Heavy metals which came from easily oxidisable metal sulfides rapidly contaminated seawater within about 1.0 h of the sediment resuspension. The sulfide oxidation during the resuspension increased the residual fraction of heavy metals in the sediment, decreased the organic bound fraction, and changed the other fractions of heavy metals in the sediment. The release of heavy metals from the sediment during resuspension was affected by the resuspension time, the oxidation rate of metal sulfides and resuspended concentration of the sediment particle.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.751-756
• /
• 2012

In this study, a heavy-metal stabilization treatment using stabilizing agents derived from waste resources was utilized on Incheon North Port range sediment contaminated with Pb, Zn, and Cu. Both calcined red mud (5%, 10%, and 15% w/w) and oyster shell (5%, 10%, and 15% w/w) were applied for a wet-curing duration of 15 days. From the sequential extraction results, the oxide and organic fraction of heavy metals (Pb, Zn, and Cu) were observed strongly in the contaminated sediment. However, the fraction of heavy metal in the stabilized sediment was higher than the organic and residual fraction, in comparison to the contaminated sediment. Moreover, the leaching of heavy metals was reduced in the stabilized sediment, compared with the contaminated sediment. From these results, red mud and oyster shell were shown to be potential stabilizers of heavy metals in contaminated sediment.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.334-340
• /
• 2005

The chemical forms of Cd, Cu, Pb, and Zn were analysed by sequential extraction technique to evaluate the effects of drying and heating of dredged sediments from Lake Chungcho. The most abundant fraction of Cd, Cu, and Zn in the wet and untreated sediment was organic/sulfidic fraction that is state in reducing environment such as the bottom condition of Lake Chungcho, while Pb dominated in residual fraction. This means that the source of Cd, Cu, and Zn in the Chungcho lake sediment is related to the organic degradation and Pb to the erosion from surrounding rocks. With drying and oxidation by dredging, heating treatment, and disposal of the lake sediment, the chemical forms of studied metals changed greatly from organic/sulfidic fraction to adsorbed and reducible fractions which are more labile in oxygenated environment. Organic/sulfidic fraction of Cd, Cu and Pb in the wet sediment was transformed with drying and heating treatments to the labile ones like adsorbed and reducible fraction, but Zn to carbonate and reducible fraction. Heating of the sediment at $320^{\circ}C$ greatly increased the labile fraction of Cd and Cu, while that at $105^{\circ}C$ for Pb and Zn. It is believed that the increase in labile forms of heavy metals in the sediments by drying and heating is caused by the contact with oxygen during drying and heating and by the increase of pH of the pore water at the expense of organic/sulfidic fraction. It is concluded that the drying and oxidation currently used in the treatment of dredged sediment can increase labile forms of heavy metals in the sediment, and the potential of the metal availability from the sediment.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.31-41
• /
• 2011

The objectives of this study were to investigate the efficiencies of the stabilizers such as mono-potassium phosphate (MKP), phosphate fertilizer and red mud in treating the mine tailings contaminated with heavy metals and to characterize the changes in fractionations of the heavy metals during the stabilization. The TCLP results showed that the stabilization efficiencies of Cd, Pb and Zn increased with the increase in the stabilizer dosage and the reaction times. MKP showed the highest efficiencies for the heavy metals stabilization among the stabilizers tested. When the mine tailings were amended with MKP, the TCLP concentrations of Cd, Pb and Zn were reduced by 79~97%, 61~84%, and 89~99%, respectively. When the composite stabilizers, MKP/phosphate fertilizer or MKP/red mud, were used, the stabilization efficiencies were lower than when MKP was used as a single stabilizer. The sequential extraction results showed that carbonates fraction of Cd and Zn increased generally. Especially, when red mud was used, carbonates fraction of Cd and Zn increased 5 and 18 times, respectively. In the case of Pb, the treatment with MKP increased residual fraction by 10 times. The results showed that MKP was the most effective in stabilizing the heavy metals (Cd, Pb and Zn) to improve the efficacy of the composite binders.