• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.17-20
• /
• 2015

Coated conductor is an important candidate for power cable applications due to its high current density. Even for DC power cable transmission, we must study the transport properties of HTS tapes after slow and fast discharge. In order to evaluate relation of the magnetic field with applied current we developed a scanning magnetic field measurements system by employing a Hall probe. This work presents the measurements of the magnetic fields above a coated conductor by varying applied current pattern. In the work, a transport current of 100 A, less than the critical current, is applied to YBCO coated conductor. We measured the residual magnetic field distributions after cut off the transport current with slow and fast operations. The results show differences of the magnetic field profiles and the corresponding current profiles by an inverse solution from the magnetic field measurement between these two operations because of the hysteresis of coated conductor excited by the transport current.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.155-158
• /
• 2013

FeCoB films were being prepared on a Ru underlayer by using the oblique incidence of sputtered and back-scattered particles which have a high in-plane magnetic anisotropy field $H_k$ above 400 Oe. It is suitable to attain such deposition condition when facing targets sputtering system. The in-plane X-ray diffraction analysis clarified that there is anisotropic residual stress which is the origin of the high in-plane magnetic anisotropy. The directional crystalline alignment and inclination of crystallite growth were also observed. Such anisotropic crystalline structures may affect the anisotropic residual stress in the films. The B content of 5.6 at.% was appropriate to induce such anisotropic residual stress and $H_k$ of 410 Oe in this experiment. The film with B content of 6 at.% possessed large saturation magnetization of 22 kG and high $H_k$ of 500 Oe. The film exhibited high ferromagnetic resonance frequency of 9.2 GHz.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.460-467
• /
• 2002

This paper deals with the distribution characteristics of the current density and axial magnetic flux density on the vacuum interrupter with axial magnetic field type using 3 dimension finite element analysis. An axial magnetic field parallel to the current flow in the arc column can improve the current breaking capacity of vacuum interrupter by affecting the arc mode. The axial magnetic flux density on the contact electrode surface is analyzed by inputting external current as a function of the transient time for sine half wave. And it also is analyzed within the gap distance of the contact electrode. The peak value of current but is decreased with the descending current on the contact electrode surface and within the gap distance of the contact electrode. The residual magnetic field is generated on the contact electrode surface and within the gap distance in the instant of zero current, which is due to the influence of eddy currents. The phase shift due to eddy currents, defined as time difference between the maximum value of current and axial magnetic field, is about 1ms in the center point of gap distance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.1109-1112
• /
• 2015

소자장치가 없는 함정의 경우 탈자 시에 지구자계와 반대방향으로 수직자화를 부여하여 수중에서 수직방향의 자계가 발생하지 않도록 한다. 탈자 시에 수직자화를 부여하는 탈자방법으로는 Flash D가 있어나 수직자화의 예측이 어렵다. 본 논문에서는 Flash D와는 달리 바이어스 자계를 인가하여 수직방향으로 자화를 형성하는 것에 대해 검토하였다. 이용된 시편은 두께 0.15mm의 아연도금 강판을 이용하여 함정의 선수에서 선미까지의 형상을 고려하여 원형, 삼각, 사각형의 형태를 가진다. FEM해석을 통해 시편형상에 따른 자계신호의 차이를 구하였고 인가자계에 의한 잔류자화특성곡선을 실험을 통해 구하였다. 바이어스자계를 수평 및 수직으로 각각 인가하여 잔류자화에 의한 자계신호를 측정하였다. 시편에 인가하는 자계는 파형발생기를 이용하여 솔레노이드 코일에 전류를 흘려 발생시켰으며 수직바이어스자계는 솔레노이드 코일 아래에 사각 코일을 설치하여 발생시켰다. 신호측정은 자계센서를 이용하였다. 이 실험을 통해 수직 및 수평 바이어스 자계는 시편에 수직 및 수평자화를 각각 형성시켰으며 수직자화는 수직바이어스 자계와 선형적인 관계를 가져 함정에 형성되는 수직자화를 예측할 수 있음을 알았다.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.888-892
• /
• 2004

It is necessary to develop soft magnetic layer with high saturation magnetization 4 $\pi{M}_s$ and in-plane magnetic anisotropy field Hk for soft magnetic underlayer of perpendicular magnetic recording media with high signal to noise ratio. Fe-Co-B layer with high 4 $\pi$Ms of about 23 kG deposited on Ni-Fe and Ni-Fe/Si seedlayer exhibited very high in-plane magnetic anisotropy filed Hk of about 280 and 380 Oe, respectively, In-plane XRD studies clarified that the lattice spacing of planes along the easy axis direction was longer than that along the hard axis direction in the Fe-Co-B layers with high Hk. These results indicate that high Hk of Fe-Co-B/Ni-Fe and Fe-Co-B/［Ni-Fe/si］ layers were resulted from magnetoelastic anisotropy owing to a residual stress. Moreover, the high Hk in the Fe-Co-B/Ni-Fe layer was maintained until 30$0^{\circ}C$ annealing temperature.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.333-338
• /
• 1999

Thin film inductors of $10 mm \times 10 mm$ with inner coil type of 14 turns were fabricated by sputtering, photo-masking, and etching processes. Their characteristics of impedances and annealing after were investigated. The properties of impedances of the thin film magnetic core inductors with inner coil type were improved by magnetic field annealing due to the removal of residual stress and the improvement magnetic properties of magnetic films. But the characteristics of frequency of the thin film magnetic core inductors were not improved by magnetic field annealing due to properties of the spiral pattern and inner coil type. The thin film magnetic core inductor annealed by uniaxal field annealing method showed an inductance of 1000 nH and resistance of$ 6 \Omega$ of 1 at 2 MHz.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.22-29
• /
• 1989

The important point of MPI is the analysis of leakage field in the defective regions. The analysis of leakage field depends on many factors such like geometry and character of defect. In general the calculation of magnetic leakage fields arising from such defects presents an extremely complicated mathematical problem and is practically insoluable, since the inhomogeneities have complex geometrical shapes and may differ in physical nature. Therefore, this paper describes Hall probe measurements of residual leakage field around artificial flaws in alloy steel bar, and shows how the results to recent developments in 2D dipole and analytic models of the magnetic field defect interaction.

• Journal of Magnetics
• /
• 제4권3호
• /
• pp.73-75
• /
• 1999

By appliying an slternate pulsed magnetic field -generated by using a sequential ignition circuit and a magnet exciting circuit- with peak value of about 10 T to the rod type Nd based magnet Nd2Fe12.7Cr1.3B with length of 5 mm and diameter of 3.6 mm, the basic magnetic properties such as saturation magnetization, residual magnetization, coercivity, maximum energy products, magnetic anisotropy and anisotropic field are investigated with obtaining the major and minor J-H loops of the magnet. The increase in coercivity due to eddy currents in ac measurement of coercivity is calculated considering eddy current loss by analyzing a wave of generating magnetic field. The average coercivity calculated for the magnet is about 12.2 kOe, anisotropy magnetic field and anisotropic constant are measured as 60 kOe 2.43 Mj/$m^3$, respectively.

• 한국정보통신학회논문지
• /
• 제20권2호
• /
• pp.445-450
• /
• 2016

본 논문은 함정의 형상이 탈자 이후에 함정에 형성되는 수직자화에 미치는 영향에 대해 조사하였다. 선박의 전면 전개도로부터 함정의 형상을 삼각형, 사각형, 원형으로 선택하여 지자계에 의한 수직방향의 유도자화를 FEM 정자장 해석으로 조사하였다. 탈자과정 중에 자화에 의한 자계를 측정하였으며, 탈자 이후 성분분리를 통해 영구자화에 의한 자계의 수평 및 수직성분의 크기를 바이어스 자계의 변화에 따라 조사하였다. 이 실험으로부터 함정의 형상을 고려하는 탈자처리 방법이 필요하며 방법으로 선수와 선미 쪽에 권선 간격을 좁게 하여 함정의 중앙부분보다 비교적 더 큰 자계가 인가되도록 하는 것이 바람직하다는 것을 알았다.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.326-330
• /
• 2013

Magnetic treatment of surface vessels and submarines (Deperm) is required to camouflage them against magnetic detection from enemy marine force. So far, deperm has been accomplished by applying an alternating magnetic field of which amplitude decreases linearly. However, the reduction of the residual flux density in the direction of magnetic field is not linear in the case of the linear protocol, since the ferromagnetic material used to construct a surface vessel, mainly Fe-C, shows a nonlinear behavior in an alternating magnetic field. This is one of main reasons to make an ordinary deperm protocol inefficient. In this paper, we propose the exponential deperming protocol and compare the exponential protocol to conventional linear protocol within the framework of deperm performance. We found out that step number could be reduced in the exponential protocol compare with in the linear protocol, because the larger numbers of deperm steps are dedicated in the irreversible domain process region on the magnetic hysteresis.