• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4E
• /
• pp.35-40
• /
• 1998

In this paper, an efficient quantization method of line spectrum pairs(LSP) with cascaded structure of vector quantizer and scalar quantizer is proposed. First, input LSP parameters is vector-quantized using a codebook a with a moderate number of entries. In the second stage of quantization, the components of residual vector are individually quantized by the scalar quantizer. The utilization of ordering property of LSP parameters and the inclusion of interframe prediction improve the quantizer performance and remove the stability check routine after quantization procedure. The new vector-scalar hybrid quantizer using 26 bits/frame shows a transparent quality of speech that an average spectral distortion is 1 dB and the frame proportion with above 2 dB spectral distortion is less than 2%. The performances of proposed quantization method is evaluated in the transmission errors.

• Phonetics and Speech Sciences
• /
• v.4 no.4
• /
• pp.79-86
• /
• 2012

In the two-band excitation (TBE) model, maximum voiced frequency (MVF) is the most important feature of the excitation parameter because the synthetic speech quality depends on MVF. Thus, this paper proposes an enhanced MVF estimation scheme based on the peak picking method. In the proposed scheme, the local peak and the peak lobe are picked from the spectrum of a linear predictive residual signal. The normalized distance between neighboring peak lobes is calculated and utilized as a feature to estimate MVF. Experimental results of both objective and subjective tests show that the proposed scheme improves synthetic speech quality compared with that of the conventional one.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.86-92
• /
• 2003

The pumping characteristics of a commercial UHV cryopump with a G-M refrigerator for various gases were investigated. The pumping speeds as a function of pumped amount of $H_2,\; D_2,\; He,\; Ar,\; N_2$, CO and the pumping capacity of $N_2$ were measured and the trend was theoretically analyzed. The spectrum change of the residual gas was also investigated during cyropump operation.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.5
• /
• pp.214-216
• /
• 2005

Photoreflectance (PR) has been measured to investigate the characterization of the $Al_{0.20}Ga_{0.80}As$/GaAs heterostructures. In the PR spectrum, the 'C' peak is confirmed as the carbon defect with residual impurity originating from the growth process. After annealing, binding energy is relatively weak with As evaporation being done to increase Ga. Also obtained is the electric field value according to annealing temperature ($300{\sim}800^{\circ}C$).

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1211-1219
• /
• 2015

In a hidden Markov model-based speech synthesis system using a two-band excitation model, a maximum voiced frequency (MVF) is the most important feature as an excitation parameter because the synthetic speech quality depends on the MVF. This paper proposes an enhanced MVF estimation scheme based on a peak picking method. In the proposed scheme, both local peaks and peak lobes are picked from the spectrum of a linear predictive residual signal. The average of the normalized distances of local peaks and peak lobes is calculated and utilized as a feature to estimate an MVF. Experimental results of both objective and subjective tests show that the proposed scheme improves the synthetic speech quality compared with that of a conventional one in a mobile device as well as a PC environment.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1307-1309
• /
• 1996

This paper presents hybrid active noise control (HANC) systems which is based on the combination of feedforward and feedback ANC controllers. HANC systems use FIR filters and is based on primary noise regeneration principle and filtered-X LMS algorithms. HANC systems show better attenuation characteristics and residual spectrum. The order of adaptive filters used in HANC systems is lower than that of conventional feedforward and feedback ANC systems. A proposed HANC algorithm was implemented using a Taxas Instruments TMS320C31 digital signal processor for experimental verification.

• Textile Coloration and Finishing
• /
• v.4 no.4
• /
• pp.90-96
• /
• 1992

In the PAN-based ACF manufacturing system stabilization step was improved with chemical treatment (preoxidation) in order to yield higher carbon content and to avoid excessive fragmentation during carbonization and activation process. The optimal condition of preoxidation was at 18$0^{\circ}C$ for 4 minutes in sodium glyceroxide in glycerine (concentration of NaOH was 0.02 meq/g). To investigate low temperature stabilization effect, preoxidized PAN fiber heated 22$0^{\circ}C$ to 26$0^{\circ}C$ as a function of treatment time and oxidative gas atmosphere, and analysed by infrared spectrum and TGA. As a results of IR and TGA, it was clear that impregnated[preoxidative] PAN had 14% higher residual than untreated PAN at 100$0^{\circ}C$ and the optimal condition of stabilization was at 26$0^{\circ}C$ for 3.5 hours within $N_2$ atmosphere.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.537-546
• /
• 2010

This research work contributed to a study for the procedure and methodology to assess the fatigue durability for a composite torque link of helicopter landing gear, which was newly developed and fabricated by the resin transfer moulding technique to interchange with metal component. The simulated load spectrum anticipated to be applied to the torque link during its operation life was generated using an advanced method of probabilistic random process, and the fatigue durability was evaluated by the strength degradation approach on the basis of material test data. The full scale fatigue test was also performed and compared with the analysis results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1371-1379
• /
• 2012

This paper presents a method for estimating the contribution of vibration sources in gasoline direct injection engine parts with a multiple-input system. A partial coherence function was used to identify the cause of the linear dependence indicated by an ordinary coherence function. To apply the partial coherence function to vibration source identification in the powertrain system of a gasoline direct injection engine, a virtual model of a two-input and single-output system is simulated. For the validation of this model, the vibration of the powertrain parts was measured by using triaxial accelerometers attached to the selected vibration sources-a high-pressure pump, fuel rail, injector, and pressure sensor. After calculating the partial coherence between each source based on the virtual model, the vibration contribution of the powertrain system is calculated. This virtual model based on the partial coherence function is implemented to determine the quantitative vibration contribution of each powertrain part.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.6
• /
• pp.53-61
• /
• 2000

In the speech recognition under the noisy environments, reducing the mismatch introduced between training and testing environments is an important issue. Spectral subtraction is widely used technique because of its simplicity and relatively good performance in noisy environments. In this paper, we introduce histogram method as a reliable noise estimation approach for spectral subtraction. This method has advantages over the conventional noise estimation methods in that it does not need to detect non-speech intervals and it can estimate the noise spectra even in time-varying noise environments. Even though spectral subtraction is performed using a reliable average noise spectrum by the histogram method, considerable amount of residual noise remains due to the variations of instantaneous noise spectrum about mean. To overcome this limitation, we propose a new over-estimation technique based on distribution characteristics of histogram used for noise estimation. Since the proposed technique decides the degree of over-estimation adaptively according to the measured noise distribution, it has advantages to be few the influence of the SNR variation on the noise levels. According to speaker-independent isolated word recognition experiments in car noise environment under various SNR conditions, the proposed histogram-based over-estimation technique outperforms the conventional over-estimation technique.