• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.688-693
• /
• 2007

The INS/GPS integration system is designed by employing an adaptive filter that can estimate the measurement noise variance using the residual of the filter. To verify the efficiency of the proposed loosely-coupled INS/GPS integration system, simulation is performed by assuming that GPS information has large position errors. Simulation results show that the proposed integration system with the adaptive filter is more effective in estimating the position and attitude errors than those with the Extended Kalman Filter.

• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.269-276
• /
• 2017

"Tracking" here refers to the estimation of a moving object with some degree of accuracy where at least one measurement is given. The measurement, which is the sensor-obtained output, contains systemic errors and errors that are due to the surrounding environment. Tracking filters play the key role of the target-state estimation after the updating of the tracking system; therefore, the type of filter that is used for the conduction of the estimations is crucial in the determining of the reliability of the updated value, and this is especially true since the performances of different filters vary when they are subjected to different environmental and initial conditions. The purpose of this paper is the conduction of a comparison between the performances of the ${\alpha}-{\beta}-{\gamma}$ filter and the Kalman filter regarding an ARPA-system tracking module that is used on board high-dynamic warships. The comparison is based on the capability of each filter to reduce noise and maintain a stable response. The residual error is computed from the difference between the true and predicted positions and the true and estimated positions for the given sample. The results indicate that the tracking accuracy of the Kalman filter is higher compared with that of the optimal ${\alpha}-{\beta}-{\gamma}$ filter; however, the response of the optimal ${\alpha}-{\beta}-{\gamma}$ filter is more stable.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.305-307
• /
• 2016

The purpose of this paper is to determine the optimal values of the gain parameters used in the tracking module for a highly dynamic warship. The algorithm of the tracking module uses the ${\alpha}-{\beta}-{\gamma}$ filter to compute accurate estimates and update the state variables, that is, positions, velocity and acceleration. The filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from set values of the damping parameter, ${\xi}$. Optimization is achieved by plotting a range of the damping parameter ${\xi}$ against the corresponding residual error and then selecting the best value of ${\xi}$ with the minimum residual error. Optimal values of the smoothing coefficients are subsequently computed from the selected damping parameter, ${\xi}$.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.101-108
• /
• 1999

A reliable and practical monitoring of drill breakage is a crucial technique in automatic machining system. In this study, a real-time monitoring system was developed to predict drill breakage using both spindle and z-axis motor current. Drill breakage is monitored by detecting the level of residual motor current which is obtained through the moving average filter algorithm. The residual exhibits a feature of sharp decrease just before drill breakage. Therefore, drill breakage can be predicted by detecting this characteristic of residual component. Z-axis motor current is better to predict the drill breakage than spindle motor current, because the former is faster in response than the latter when drill breakage is occurred. The evaluation experiments have shown that the developed monitoring system works very well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.189-191
• /
• 2005

In the scalable extension of H.264/AVC, the codec is based on a layered approach to enable spatial scalability. In each layer, the basic concepts of motion compensated prediction and intra prediction are employed as in standard H.264/AVC. Additionally inter-layer prediction algorithm between successive spatial layers is applied to remove redundancy. In the inter-layer prediction, as the prediction we can use the signal that is the upsampled signal of the lower resolution layer. In this case, coding efficiency can be variable as the kinds of interpolation filter. In this paper, we investigate the approach to select the interpolation filter for residual signal in order to optimal prediction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.562-567
• /
• 2001

The number of required modes to provide accurate force information in a truncated model of a flexible structure is investigated. In the case of modal truncation of a distributed parameter system, the difference in convergence rates between displacements and forces is discussed. The residual flexibility, a term from past literature, is used to recapture some of the lost force information in a truncated model. This paper presents numerical and experimental results of a study where the residual flexibility is used in conjunction with a Kalman filter so that accurate force information may be obtained from a small set of displacement measurements with a reduced-order model. The motivation for this paper is to be able to obtain accurate information about unmeasurable dynamic reaction forces in a rotating machine for diagnostic and control purposes.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.150-157
• /
• 2002

The number of required modes to provide accurate force information in a truncated model of a flexible structure is investigated. In the case of modal truncation of a distributed parameter system, the difference in convergence rates between displacements and forces is discussed. The residual flexibility. a term from past literature, is used to recapture some of the lost force information in a truncated model. This paper presents numerical and experimental results of a study where the residual flexibility is used in conjunction with a Kalman filter so that accurate force information may be obtained from a small set of displacement measurements wish a reduced-order model. The motivation for this paper is to be able to obtain accurate information about unmeasurable dynamic reaction forces in a rotating machine for diagnostic and control purposes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.483-484
• /
• 2007

In this paper, we describe a chip design technique for instrumentation amplifier using a nested-chopping technique. Conventional chopping technique uses a pair of chopper, but nested chopping technique uses two pairs of chopper to reduce residual offset and 1/f noise. The inner chopper pair removes the 1/f noise, while the outer chopper pair reduces the residual offset. Our instrumentation amplifier using a nested chopping technique has residual offset under 100 nV. We also implement very low frequency filter. Since this filter needs very large RC time constant, we use a technique named 'diode connected PMOS' to increase R with small die area. The total power consumption is 3.1 mW at the supply voltage of 3.3V with the 0.35um general CMOS technology. The die area of implemented chip was $530um{\times}300um$.

• 한국정보통신학회논문지
• /
• 제10권7호
• /
• pp.1332-1337
• /
• 2006

이동로봇의 위치추정오차를 검출하는 방법으로 칼만필터의 잔류오차를 최소적응알고리즘으로 검사하여 시스템의 이상유무를 확인할 수 있음을 알아보았다. 이동로봇의 이상유무판별에 칼만필터를 적용하기 위한 모델로는 위치이동에 기여하는모터부분의 모델만을 사용하였고, 칼만필터의 잔류오차에 나타나는 바이어스성분의 검출로 이상유무를 판별할 수 있음을 확인하였다. 이동로봇의 동특성모델을 이용하여 이동로봇의 위치추정에 나타나는 오차를 판별할 수 있는 제안된 방법은 다른 부가적인 외부장치가 없이 사용될 수 있는 장점이 있다 . 칼만필터는 모터의 구동전류를 추정하고, 이 잔류오차에 적응자기동조필터를 적용하여 백색잡음의 성질을 지닌 잔류오차를 판별하게 된다. 이동로봇의 모델에 가능한 상황을 가정하여 구성한 시뮬레이션의 결과들은 제안된 방법이 위치추정 오차의 판별에 사용될 수 있음을 보여주고 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.225-227
• /
• 2009

International standard specification, H.264/SVC improved from H.264/AVC, is set up so as to promote free use of huge multimedia data in various channel environments.;H.264/AVC is a international standard speicification for video compression, adopted and commercialized as standard for DMB broadcasting by JVT of ISO/IEC MPEG and ITU-T VCEG. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding. Among prediction technologies, 'inter-layer intra prediction' is to use co-located block of up sampled sublevels as a prediction signal. At this time, application of interpolation is one of the most important factors to determine encoding efficiency. SVC's currently using poly-phase FIR filter of 4-tap and 2-tap respectively to luma components. This paper is written for the purpose of analyzing encoding performance according to the interpolation. For this purpose, we applied poly-phase FIR filter of '2-tap', '4-tap' and '6-tap' respectively to luma components and then measured bit-rate, PNSR and running time of interpolation filter. We're expecting that the analysis results of this paper will be utilized for effective application of interpolation filter. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding.