• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.285-307
• /
• 2004

Synthesize and examine petrological characteristic and geochemical characteristic by weathering formation of rock and progress of weathering laying stress on stone cultural properties of Unjusa temple of Chonnam Hwasun county site in this research. Examine closely weathering element that influence mechanical, chemical, mineralogical and physical weathering of rocks that accomplish stone cultural properties and these do quantification, wish to utilize by a basic knowledge for conservation scientific research of stone cultural properties by these result. Enforced component analysis of rock and mineralogical survey about 18 samples (pyroclastic tuff; 7, ash tuff; 4, granite ; 4, granitic gneiss; 3) all to search petrological characteristic and geochemical characteristic by weathering of Unjusa temple precinct stone cultural properties and recorded deterioration degree about each stone cultural properties observing naked eye. Major rock that constitution Unjusa temple one great geological features has strike of N30-40W and dip of 10-20NE being pyroclastic tuff. This pyroclastic tuff is ranging very extensively laying center on Unjusa temple and stone cultural properties of precinct is modeled by this pyroclastic tuff. Stone cultural propertieses of present Unjusa temple precinct are accomplishing structural imbalance with serious crack, and because weathering of rock with serious biological pollution is gone fairly, rubble break away and weathering and deterioration phenomenon such as fall off of a particle of mineral are appearing extremely. Also, a piece of iron and cement mortar of stone cultural properties everywhere are forming precipitate of reddish brown and light gray being oxidized. About these stone cultural properties, most stone cultural propertieses show SD(severe damage) to MD(moderate damage) as result that record Deterioration degree. X-ray diffraction analysis result samples of each rock are consisted of mineral of quartz, orthoclase,plagioclase, calcite, magnetite etc. Quartz and feldspar alterated extremely in a microscopic analysis, and biotite that show crystalline form of anhedral shows state that become chloritization that is secondary weathering mineral being weathered. Also, see that show iron precipitate of reddish brown to crack zone of tuff everywhere preview rock that weathering is gone deep. Tuffs that accomplish stone cultural properties of study area is illustrated to field of Subalkaline and Peraluminous, $SiO_2$(wt.%) extent of samples pyroclastic tuff 70.08-73.69, ash tuff extent of 70.26-78.42 show. In calculate Chemical Index of Alteration(CIA) and Weathering Potential Index(WPI) about major elements extent of CIA pyroclastic tuff 55.05-60.75, ash tuff 52.10-58.70, granite 49.49-51.06 granitic gneiss shows value of 53.25-67.14 and these have high value gneiss and tuffs. WPI previews that is see as thing which is illustrated being approximated in 0 lines and 0 lines low samples of tuffs and gneiss is receiving esaily weathering process as appear in CIA. As clay mineral of smectite, zeolite that is secondary weathering produce of rock as result that pick powdering of rock and clothing material of stone cultural properties observed by scanning electron micrographs (SEM). And roots of lichen and spore of hyphae that is weathering element are observed together. This rock deep organism being coating to add mechanical weathering process of stone cultural properties do, and is assumed that change the clay mineral is gone fairly in stone cultural properties with these. As the weathering of rocks is under a serious condition, the damage by the natural environment such as rain, wind, trees and the ground is accelerated. As a counter-measure, the first necessary thing is to build the ground environment about protecting water invasion by making the drainage and checking the surrounding environment. The second thing are building hardening and extirpation process that strengthens the rock, dealing biologically by reducing lichens, and sticking crevice part restoration using synthetic resin. Moreover, it is assumed to be desirable to build the protection facility that can block wind, sunlight, and rain which are the cause of the weathering, and that goes well with the surrounding environment.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2005.05a
• /
• pp.383-405
• /
• 2005

The traditional market is foremost a regionally positioned place, wherein the market directly represents regional and cultural centered traits while it plays an important role in the circulation of facilities through reciprocal, informative and cultural exchanges while sewing to form local communities. The traditional market in Korea is one of representative retail businesses and premodern marketing techniques by family owned business of less than five members such as product management, purchase method, and marketing patterns etc. Since the 1990s, the appearance of new circulation-type businesses and large discount convenience stores escalated the loss of traditional competitiveness, increased the living standard of customers, changed purchasing patterns, and expanded the ubiquity of the Internet. All of these changes in external circulation circumstances have led the traditional markets to lose their place in the economy. The traditional market should revive on a regional site basis through the formation of a community of regional neighbors and through knowledge-sharing that leads to the creation of wealth. For the purpose of creating a wealth in a place, the following components are necessary: 1) a facility suitable for the spatial place of the present, 2)trust built through exchanges within the changing market environment, which would simultaneously satisfy customer's desires, 3) international bench marking on cases such as regionally centered TCM (England), BID (USA), and TMO (Japan) so that the market unit of store placement transfers from a spot policy to a line policy, 4)conversion of communicative conception through a surface policy approach centered around a macro-region perspective. The budget of the traditional market funding policy was operational between 2001 and 2004, serving as a counter move to solve the problem of the old traditional market through government intervention in regional economies to promote national economic strength. This national treasury funding project was centered on environmental improvement, research corps, and business modernization through the expenditure of 3,853 hundred million won (Korean currency). However, the effectiveness of this project has yet to be to proven through investigation. Furthermore, in promoting this funding support project, a lack of professionalism among merchants in the market led to constant limitations in comprehensive striving strategies, reduced capabilities in middle-and long-term plan setup, and created reductions in voluntary merchant agreement solutions. The traditional market should go beyond mere physical place and ordinary products creative site strategies employing the communicative approach must accompany these strategies to make the market a new regional and spatial living place. Thus, regarding recent paradigm changes and the introduction of region-based site functions into the traditional market, acquiring a conversion of direction into the newly developed project is essential to reinvestigate the traditional market composed of cultural and economic meanings, for the purpose of the research. Excavating social policy demands through the comparative analysis of domestic and international cases as well as innovative and expert management leadership development for NPO or NGO civil entrepreneurs through advanced case research on present promotion methods is extremely important. Discovering the seeds of the cultural contents industry cored around regional resource usages, commercializing regionally reknowned products, and constructing complex cultural living places for regional networks are especially important. In order to accelerate these solutions, a comprehensive and systemized approach research operated within a mentor academy system is required, as research will reveal distinctive traits of the traditional market in the aging society.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.38
• /
• pp.181-226
• /
• 2008

The purpose of this paper is to describe the settling procedures of the investor-state disputes in the FTA Investment Chapter, and to research on the international arbitration system for the settlement of the investor-state disputes under the ICSID Convention and UNCITRAL Arbitration Rules. The UNCTAD reports that the cumulative number of arbitration cases for the investor-state dispute settlement is 290 cases by March 2008. 182 cases of them have been brought before the ICSID, and 80 cases of them have been submitted under the UNCITRAL Arbitration Rules. The ICSID reports that the cumulative 263 cases of investor-state dispute settlement have been brought before the ICSID by March 2008. 136 cases of them have been concluded, but 127 cases of them have been pending up to now. The Chapter 11 Section B of the Korea-U.S. FTA provides for the Investor_State Dispute Settlement. Under the provisions of Section B, the claimant may submit to arbitration a claim that the respondent has breached and obligation under Section A, an investment authorization or an investment agreement and that the claimant has incurred loss or damage by reason of that breach. Provided that six months have elapsed since the events giving rise to the claim, a claimant may submit a claim referred to under the ICSID Convention and the ICSID Rules of Procedure for Arbitration Proceedings; under the ICSID Additional Facility Rules; or under the UNCITRAL Arbitration Rules. The ICSID Convention provides for the jurisdiction of the ICSID(Chapter 2), arbitration(Chapter 3), and replacement and disqualification of arbitrators(Chapter 5) as follows. The jurisdiction of the ICSID shall extend to any legal dispute arising directly out of an investment, between a Contracting State and a national of another Contracting State, which the parties to the dispute consent in writing to submit to the ICSID. Any Contracting State or any national of a Contracting State wishing to institute arbitration proceedings shall address a request to that effect in writing to the Secretary General who shall send a copy of the request to the other party. The tribunal shall consist of a sole arbitrator or any uneven number of arbitrators appointed as the parties shall agree. The tribunal shall be the judge of its own competence. The tribunal shall decide a dispute in accordance with such rules of law as may be agreed by the parties. Any arbitration proceeding shall be conducted in accordance with the provisions of the Convention Section 3 and in accordance with the Arbitration Rules in effect on the date on which the parties consented to arbitration. The award of the tribunal shall be in writing and shall be signed by members of the tribunal who voted for it. The award shall deal with every question submitted to the tribunal, and shall state the reason upon which it is based. Either party may request annulment of the award by an application in writing addressed to the Secretary General on one or more of the grounds under Article 52 of the ICSID Convention. The award shall be binding on the parties and shall not be subject to any appeal or to any other remedy except those provided for in this Convention. Each Contracting State shall recognize an award rendered pursuant to this convention as binding and enforce the pecuniary obligations imposed by that award within its territories as if it were a final judgment of a court in that State. In conclusion, there may be some issues on the international arbitration for the settlement of the investor-state disputes: for example, abuse of litigation, lack of an appeals process, and problem of transparency. Therefore, there have been active discussions to address such issues by the ICSID and UNCITRAL up to now.

• Journal of Wetlands Research
• /
• v.17 no.3
• /
• pp.320-324
• /
• 2015

This study was executed to know the effect of three differently controlled temperature conditions on Huanren brown frog (Rana huanrensis )'s growth in 2013. We've collected nine Huanren brown frog egg's sacs on Mt. Surak ($37^{\circ}40^{\prime}55.86^{{\prime}{\prime}}N$, $127^{\circ}05^{\prime}19.99^{{\prime}{\prime}}E$) in Seoul. We put those nine egg sacs in the controlled growth chambers under low temperature (LT, $5{\pm}2^{\circ}C$), medium temperature (MT, $10{\pm}2^{\circ}C$), and high temperature (HT, $13{\pm}2^{\circ}C$) conditions with three egg sacs, respectively. We measured the eggs' hatching rate, their hatching periods, and the size of the hatched individuals. The hatching rate was higher in MT (95.6%) and the rates of the other treatments were relatively lower but very similar such as LT (82.2%) and HT (82.6%). The three hatching periods were 10 days at HT, 14 days at MT and 23 days at LT. The body sizes of the hatched individuals were biggest at MT ($7.62{\pm}0.11mm$), smallest at LT ($6.82{\pm}0.10mm$) and medium at HT ($7.19{\pm}0.15mm$) (P-value ${\leq}0.0001$). From our results, we found that the various water temperatures could be very effective to Huanren brown frog eggs' hatch and growth including their body sizes. We suggest if we study more about the growth of Huanren brown adult frogs under similar temperature conditions for a long term period, it must be very helpful for conservation study about metamorphosis rate and size of adult frog as well as we could understand about the amphibians who are adapting to the climate change.

• Korean Journal of Environment and Ecology
• /
• v.28 no.1
• /
• pp.90-98
• /
• 2014

This study was carried out to provide basic data. his research conducted the survey using face to face survey and board survey during about 2 months from Oct. to Nov. in 2009 for users of Bongje Mt., a small-sized mountain at downtown, and Acha Mt., a big-sized mountain at outskirt so as to compare the differences of using behavior by forms and size of urban forest in living area of Seoul. Characteristics of urban forest users, using behavior, demands and satisfaction of facilities and management and pass pattern were set as research items. The thing in common for using behavior is that both genders of main users were in more than 40s~60s. They showed the highest using rate from 7 a.m. to 12 p.m. and high rate for using nearly everyday or visiting two or three times per a week. In addition, it's judged that the accessibility from dwelling area to entrance of urban forest in living area is good and satisfaction for the standard of facilities and their management in forest way was relatively low. For the complement and essential facilities, 'sanitary facilities' showed the highest rate. For the differences of using behavior, most of Bongje Mt. users were residents living within a 2km radius (under the standard of walking) and they moved by average 1.3km. And, they preferred short-time activities of about 24 minutes. On the other hand, main users of Acha Mt. were residents living within a 4km radius (under the standard of walking) and people of other regions. and 60% of them preferred the passage route taking 3hours half over 6km. Through the survey on using behavior of urban forest in living area of Seoul, with different using form and forest size, introduction of using program for main users or managing method of differentiations for introduced facility's management should be properly applied. Especially, urban forest should be systematically managed like park green as expected that residents's using of urban forest will be increased with the increase of leisure time.

• Research in Community and Public Health Nursing
• /
• v.10 no.1
• /
• pp.70-79
• /
• 1999

This study attempts to encourage the development of a rehabilitation delivery system as a substitute service for hospitalization such as a community based intermediate facility or home health care. We need substitute services for hospitalization to curtail the length of stay for inpatients due to car accidents. It focused on developing an estimation for early discharge based on a detailed statement of treatment from medical records of 109 inpatients who were hospitalized at General Hospital in 1997. This study has three specific purposes: First, to find the mean length of stay and mean medical expenditure. Second, to estimate the mean of early discharge from the mean length of stay. Third, to analyize the income effect per bed from early discharge. In order to analyze the length of stay and medical expenditure of inpatients the author conducted a micro and macro-analysis with medical expenditure records. To estimate the early discharge we examined with a group of 4 experts decreases in the amount of treatment after surgery, in treatments, in tests, in drug methods. We also looked their vital signs, the start of ROM exercise, the time removel, a patient's visitations, and possible stable conditions. In addition to identifing the income effect due to an early discharge, the data was analyzed by an SPSS-PC for windows and Excell program with a regression analysis model. The research findings are as follows: First, the mean length of stay was 47.56 days, but the mean length of stay due to early discharge was 32.26 days. The estimation of early discharge days was shown to depend on the length of stay. The longer the length of stay, the longer the length before discharge. For example, if the patient stayed under 14 days the mean length of stay was 7.09 while an early discharge was 6.39, whereas if the mean length of stay was 155.73, the early discharge time was 107.43. The mean medical expenditure per day of car accident patients was found to be 169,085 Won, whereas the mean medical expenditure per day was shown to be in a negative linear form according to the length of stay. That is the mean expenditure for under 14 days of stay was 303,015 Won and the period of the hospitalization of 15 days to 29 days was 170,338 Won and those of 30 days to 59 days was 113,333 Won. The estimation of the income effect due to being discharged 16 days was around 2,350,000 Won with a regression analysis model. However, this does not show the real benefits from an early discharge, but only the income increasing amount without considering prime medical cost at a general hospital. Therefore, we need further analysis on cost containments and benefits incending turn over rates and medical prime costs. From these research findings, the following suggestions have been drawn, we need to develop strategies on a rehabilitation delivery system focused on consumers for the 21st century. Varions intermediate facilities and home health care should be developed in the community as a substitute for shortening the length of stay in hospitals. In home health care cases, patients who want rehabilitation services as a substitute for hospitalization in cooperation with private health insurance companies might be available immediately.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.2 s.2
• /
• pp.98-107
• /
• 2000

Increased use of computers in AEC (Architecture, Engineering and Construction) has expanded the amount of information gained from CAD (Computer Aided Design), PMIS (Project Management Information System), Structural Analysis Program, and Scheduling Program as well as making it more complex. And the productivity of AEC industry is largely dependent on well management and efficient reuse of this information. Accordingly, such trend incited much research and development on ITC (Information Technology in Construction) and CIC (Computer Integrated Construction) to be conducted. In exemplifying such effort, many researchers studied and researched on IFC (Industry Foundation Classes) since its development by IAI (International Alliance for Interoperability) for the product based information sharing. However, in spite of some valuable outputs, these researches are yet in the preliminary stage and deal mainly with conceptual ideas and trial implementations. Research on unveiling the process of the IFC application development, the core of the Design Information management system, and its applicable plan still need be done. Thus, the purpose of this paper is to determine the technologies needed for Design Information management system using IFC, and to present the key roles and the process of the IFC application development and its applicable plan. This system play a role to integrate the architectural information and the structural information into the product model and to group many each product items with various levels and aspects. To make the process model, we defined two activities, 'Product Modeling', 'Application Development', at the initial level. Then we decomposed the Application Development activity into five activities, 'IFC Schema Compile', 'Class Compile', 'Make Project Database Schema', 'Development of Product Frameworker', 'Make Project Database'. These activities are carried out by C++ Compiler, CAD, ObjectStore, ST-Developer, and ST-ObjectStore. Finally, we proposed the applicable process with six stages, '3D Modeling', 'Creation of Product Information', 'Creation and Update of Database', 'Reformation of Model's Structure with Multiple Hierarchies', 'Integration of Drawings and Specifications', and 'Creation of Quantity Information'. The IFCs, including the other classes which are going to be updated and developed newly on the construction, civil/structure, and facility management, will be used by the experts through the internet distribution technologies including CORBA and DCOM.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.6
• /
• pp.12-18
• /
• 2010

This study was carried out in order to propose a planning index for improved school forests in Gyeonggido. For the purpose of this study we selected 42 out of 75 school forests established during 2005 in Gyeonggido. All 42 school forests were surveyed and analyzed by frequency, cross tabulation, and group average analysis with SPSS 12.0 version. The present condition of the school forests was analyzed with in conjunction with items such as the surrounding environment, centralization, and locational characteristics as nominal points. Other items: trees, shrubs, pavement, fruit trees, transplantation, evergreen trees, and recreation facility content percentage were analyzed as a proportion point. After reviewing the literature and analyzing the present condition of school forests, we constructed a conceptual framework and formulated a hypothesis for this research. Data were obtained through a questionnaire, given to 98 students majoring in landscape architecture at Hankyong University in 2007. Results showed that the primary variables for tree health were soil compaction and the depth of soil filling. They were the most serious factors that deteriorate the health of trees. Based on the relationship between tree health and growing conditions, trees inside the school forest should be managed to provide more growing space and less abuse. The minimum area for trees inside the school forest for good growth conditions should be within the drip lines. We have found that the minimum percentage of tree content is 0.13, which means that more than 130 trees need to be planted over $1,000m^2$ green space. More than 3,580 shrubs need to be planted over $1,000m^2$ green space. The pavement area should be controlled to less than 19% of the total size of the school forest area. Finally, more than 39 trees out of 100 trees planted should be evergreen. The research results suggest that the construction planning index of Gyeonggido school forest be recommended in the planning and development process of the construction project carried out every year.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.593-601
• /
• 2017

With the rapid industrial development and national economic advance since 1970, the national income of Korea has sharply increased. As a result, issues regarding city expansion, urban concentration, increase in the number of registered motor vehicles, and increase in traffic have caused transportation issues such as traffic congestion and problems with parking. Especially, enforcement ordinances and rules have been established on installation and management of parking lots to solve problems with parking which are raised as social problems such as conflict with neighbors but the flexible calculation of legal parking space has the limitations because of the diversity and complex functionality of purposes of facilities. Accordingly, this study attempted to supplement such demerit of the parking space demand forecast method based on the legally required number of parking spaces and average unit requirement in the parking space supply. This study estimated the required number of parking spaces by analyzing existing literature, collecting field research data, and analyzing the factors that have an impact on the parking demand. Also, it compared the required number of parking spaces based on the average unit requirement as well as the required number of parking spaces by the forecast model based on the cumulative number of motor vehicles parked. The result was that the required number of parking space based on average unit requirement was less than the cumulative number of motor vehicles parked by 9.99%. Meanwhile, the required number of parking spaces by the forecast model was more than the cumulative number of motor vehicles parked by 4.37%. Therefore, it is believed that the parking space forecast model is more efficient than the others in estimating there quired parking space. The parking space forecast model of this study consider different environmental factors to enable practical parking demand forecast considering the local characteristics and thus supply the parking space in an efficient way.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.199-212
• /
• 2007

If a type IP-2 transport package were to be subjected to a free drop test and a penetration test under the normal conditions of transport, it should prevent a loss or dispersal of the radioactive contents and a more than 20% increase in the maximum radiation level at any external surface of the package. In this paper, we suggested the analytic method to evaluate the structural safety of a type IP-2 transport package using a thick steel plate for a structure part and a bolt for tying a bolt. Using an analysis a loss or dispersal of the radioactive contents and a loss of shielding integrity were confirmed for two kinds of type IP-2 transport packages to transport radioactive waste drums from a waste facility to a temporary storage site in a nuclear power plant. Under the free drop condition the maximum average stress at the bolts and the maximum opening displacement of a lid were compared with the tensile stress of a bolt and the steps in a lid, which were made to avoid a streaming radiation in the shielding path, to evaluate a loss or dispersal of radioactive waste contents. Also a loss of shielding integrity was evaluated using the maximum decrease in a shielding thickness. To verify the impact dynamic analysis for free drop test condition and evaluate experimentally the safety of two kinds of type IP-2 transport packages, free drop tests were conducted with various drop directions. For the tests we examined the failure of bolts and the deformation of flange to evaluate a loss or dispersal of radioactive material and measured the shielding thickness using a ultrasonic thickness gauge to assess a loss of shielding integrity. The strains and accelerations acquired from tests were compared with those by analyses to verify the impact dynamic analysis. The analytic results were larger than the those of test so that the analysis showed the conservative results. Finally, we evaluated the safety of the type IP-2 transport package under the stacking test condition using a finite element analysis. Under the stacking test condition, the maximum Tresca stress of the shielding material was 1/3 of the yielding stress. Two kinds of a type IP-2 transport package were safe for the free drop test condition and the stacking test condition.