• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.4
• /
• pp.17-27
• /
• 2020

In this paper, we proposed verification methods to prove the effectiveness of automatic test equipment (ATE) for weapon systems. Since the test results from the unproven ATE is not reliable and its use is limited as objective data, it is essential to verify the test equipment in order to guarantee the quality level of the unit under test (UUT). Through the suggested methods, it is applied to the ATE of the tactical information communications network (TICN) system to confirm the verification results and to describe the validation results.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.143-148
• /
• 2019

Numerous pipe lines can be found on various plant-based industrial sites. These pipelines should be periodically checked for defects. Most of these pipelines are internally inaccessible and difficult to visually inspect. Therefore, the inspection is being carried out with the help of non-contact inspection equipment such as ultrasonic flaw detection equipment. The use of ultrasonic flaw detection equipment can raise time and efficiency issues. In order to solve this problem, we will study the basic technology necessary for the development of automated inspection system equipped with ultrasonic measuring equipment and verify the validity through the fabrication of the demonstration device.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.183-184
• /
• 2017

Some of the information created during the design phase of an New NPP life cycle is useful only for the execution of the construction phase; however, much of the information greatly impacts the longer-term operational phase. To most make use of design and construction information produced by data based design system during the construction and operation phase, This research is identified controlled data and drawn design information of controlled equipment from documents generated during the life-cycle stages. This study aimed to analyze related documents to assure traceability of controlled equipment from design phase through O&M and then suggested DB(Data Base) based control method on technical information of major equipment throughout nuclear power plant lifecycle.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.73-84
• /
• 2018

PURPOSES : Most of the traffic surveys are carried out by an inspection method by the manpower. In some cases, the video equipment is used only in some regions when the traffic volume is surveyed. In this case, there is environmental restriction that the road equipment to fix the video equipment should exist. Also, in areas where information such as digital maps and satellite photographs is old or not provided, they are forced to rely on manpower research, but it is difficult to put huge amounts of time and money into the research in places where labor supply and demand is difficult. This difficulty is particularly pronounced in overseas business. METHODS : The purpose of this study is to improve the efficiency of business by using the drones in the traffic investigation through analysis of the cost reduction effect between the existing method and the proposed method in the overseas business traffic survey. The scope of the research is limited to the scope of research, and based on the case of overseas projects, the method of using drone for each research sector is suggested. RESULTS : In the traffic condition survey section, we propose the use of drone for traffic survey and queue length survey, and it is confirmed that there is a cost saving effect of 16% ~ 27% compared with the existing method. In the road condition survey, we propose the use of drones for road surface linear survey, geometry survey, and obstacle survey, and it was confirmed that the cost reduction effect is 39% ~ 93% compared to the existing method. CONCLUSIONS : In addition to overseas business, it is expected that it will have a positive effect on research time and cost reduction by using drone in traffic survey in domestic area where labor supply is not easy or basic data is insufficient.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.53-63
• /
• 2016

In this paper, we proposed the improvements for performance test and surveying equipment regulations, standards, methods and procedures, depending on the need of improving the legal system for surveying equipment in a diverse and sophisticated surveying industry. This research was performed first investigating the existing legal systems(Act on the establishment and management of spatial data, Framework act on national standards, ISO 17123, JIS B 7912) with respect to the surveying equipment performance testing and the research for IOS and KOLAS suggested the improvements on the application for the surveying equipment performance testing standard. More exactly, first, two years were presented for the surveying equipment performance testing cycle considering the precise accuracy of the instrument stability, purpose and frequency of use, etc. Second, the abolition of the measurement distance by grade and the upward or cross-grade adjustment of the single prism standards about the light wave rangefinder and total station were suggested for the improvement on survey equipment performance criteria. Third, since the main function of total station is focused on a three-dimensional coordinate measurement due to the improvement of surveying equipment performance testing, it was proposed to use the precision(repeatability) of the coordinate measuring method as an evaluation method.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.6
• /
• pp.612-618
• /
• 2012

In this paper, in order to prevent electric shock of high voltage system of HFCV after crash test, insulation performance measurement methods were studied. Under conditions of in-use, insulation performance tests can be divided into measurement method using the vehicle's own RESS as DC voltage source and measurement method using DC voltage from off-vehicle sources. However, these tests can not be applied after a post-crash because parts of high voltage system cover should be removed, and insulation performance can be influenced during these tests. Therefore, we proposed post-crash insulation performance test methods for preventing electric shock through problem analysis of previous post-crash insulation performance tests. Also, test equipment which can measure voltage absence and total energy was developed. We verified performance of the equipment through experiments with vehicle test.

• Advances in concrete construction
• /
• v.16 no.4
• /
• pp.189-203
• /
• 2023

This study investigates the bending and stability properties of cylindrical constructions, with a focus on their use in the design and implementation of sporting equipment. The work focuses on a cylindrical construction resembling nanomotors, similar to components seen in sports equipment, using mathematical modeling based on high-order beam theory and nonlocal strain gradient theory. The analysis provides important insights into the dynamic behavior of these systems, revealing light on the impact of numerous factors such as rotational velocity, section change rate, and structural dimensions. The results show a relationship between angular velocity growth and section change rate, which leads to an increase in fundamental frequency values. Furthermore, the research emphasizes the effect of structural factors on dynamic deflection, giving critical information for increasing the stability and performance of sporting equipment. This study adds to the area of sports engineering by providing a more nuanced understanding of how cylindrical constructions react under diverse settings. The results will help to guide the design and manufacturing processes of sports equipment, assuring improved stability and performance for players across a wide range of sports.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1470-1475
• /
• 2009

Until now for the safety of structures and equipment monitoring technology to measure the amount of the physical, if that is the one, one-point or single-source target is one the most. Therefore, becoming more numerous and complex to measure the amount of physical measurement technology that is comprehensive and complex, multi-source concepts to the monitoring of a multi-sensing technology is required. Have the same characteristics of multi-source multi-use space such as a multi-structure of facilities/equipment is. The people's safety in a multi-use facility will be directly related to life and even a little carelessness can lead to large-scale disaster occurs because of several factors, risks and to manage detect in advance the development of an intelligent monitoring technology is essential. Therefore, this study shows that multiple structures/facilities to improve the quality of human life in research to maintain a safe and comfortable living space for multi-source intelligence to the development of monitoring technology to achieve that goal, and the ubiquitous sensor network system on the basis of the wireless transmission module, and multiple research facilities/equipment for the ultra-small sensors for health monitoring study was performed.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.297-307
• /
• 2012

A femtocell is a small cellular base station, typically designed for use in a home or small business. The random deployment of a femtocell has a critical effect on the performance of a macrocell network due to co-channel interference. Utilizing the advantage of a multiple-input multiple-output system, each femto base station (FBS) is able to form a cluster and generates a precoding matrix, which is a modified version of conventional single-cell block diagonalization, in a cooperative manner. Since interference from clustered-FBSs located at the nearby macro user equipment (MUE) is the dominant interference contributor to the coexisting networks, each cluster generates a precoding matrix considering the effects of interference on nearby MUEs. Through simulation, we verify that the proposed algorithm shows better performance respective to both MUE and femto user equipment, in terms of capacity.

• Journal of The Korean Association For Science Education
• /
• v.28 no.8
• /
• pp.880-889
• /
• 2008

Research-based professional development is essential for in-service and pre-service science teachers across the nation. The purpose of this study was to examine in-service science teachers' and pre-service teachers' perception of the training program for professional development using advanced science laboratory equipment and experiments. Science teachers (N= 43) in science high schools and pre-service science teachers (N=189) were selected as research subjects. As a result of this study, in-service teachers and pre-service teachers recognized that they lacked understanding and experience in advanced science laboratory equipment, although they perceived the importance of its use. They wanted to attend training programs during vacation if they would have the opportunity. Both groups felt that they needed to improve their ability to operate the advanced science lab equipment, preferring to practice these instruments in the training programs. In-service teachers preferred the development of teaching and learning programs for use of the advanced science laboratory equipment. However, pre-service teachers preferred using the advanced science laboratory equipment. The study gives implications for teachers' professional development.